Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree…

Test Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.

Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…

Autoclavable polypropylene (PP) Excellent rack for benchtop use or freezer storage 80/60 well rack capacities: 80-place for 1.5mL and 2mL tubes 60-place for 0.5mL and 0.2 mL tubes 96 well rack capacities: 96-place for 1.5mL and 2.0mL tubes 96-place for 0.5 mL and 0.2 mL tubes …

BioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…

Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…

The 96 Well "Reversible" Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

Supplied in assorted colors Autoclavable

Flame Retardant Color: Charcoal Long wearing Chemical and solvent resistant Float on H20 bath with full tube and sample Ideal for refrigerated or frozen storage samples All tubes can be decanted simultaneously Low profile: Will not tip over easily Lightweight: Weighs less…

Maintain the 96-Place Format of High Throughput Applications with Large, 15mL Test Tube Capacity Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid…

Stain-Resistant Durable Rack 72 interchangeable pegs - 11 small pegs Drip channel with draining hose Mounting kit and template for hanging Hooks for joining together additional racks Rack dimensions: 17.7"(W) x 24.8"(H) x 4.3"(D) (450mm x 630mm x 110mm) Peg…

This sturdy stand is fabricated of 3/8" clear  acrylic adding style and function to a normally wall mounted rack. The 4.5 lb stand includes all hardware needed to attach to the 5918-0000 drying rack and also comes with a 5' section of our 1085-0012 vinyl laboratory tubing. Further,…

For all of your magnetic separation experiments, these powerful racks sequester magnetic beads so that affinity ligands (antibodies, streptavidin or proprietary reagents for coupling nucleic acids) or rinse solutions can be added or decanted in assays. They offer exceptional quality and value…

Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger…

Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Three tiered design holds tubes securely Sturdy handles facilitate easy transport 4 Color options for organization of samples or benchtop

For ultra-low temperature storage of 1.2 and 2.0 mL cryogenic vials Usable in a wide range of environments and temperatures (-196 to +121°C) Numerical grid system, which is molded into box with corresponding numbers printed on lid 25-place boxes are arranged in a 5 x 5 array and measure…

Drying Rack, Pegboard, Epoxy, Glassware Epoxy pegboards come standard in black, 1" thick material. A stainless steel drip trough (sold seperately) can be easily mounted to the bottom edge to provide excellent draining capacity. Please note: Units do not include a wall attachment and…

Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …

Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

Three styles available for our NMR and EPR Tubes 1187C59 (820-A): Lightweight polypropylene rack maximizes your benchtop storage capacity and is virtually inert 1187C64 (WG-2442): Simple but useful this stainless steel NMR tube rack accommodates 12 tubes with a maximum OD of 5mm.…

Drying Rack, Stainless Steel, Glassware Mod-Rack pegboards serve a dual purpose in a modern laboratory. First, they allow you to quickly dry important, and often fragile, equipment in a sanitary manner. Second, our well-crafted pegboards are a safe place to store often used materials so they…

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

Produced from polyamide coated steel Offers better heat and chemical resistance than other coatings Ideal for safely carrying up to six bottles or wash bottles

Polystyrene racks can be stacked empty or with any number of vials inserted Polypropylene racks can be stacked empty or with a full tray of vials Polypropylene rack is durable; can be washed and reused multiple times All racks feature alphanumeric indexing for easy location of samples …

Four angled compartments protect and organize glass or plastic serological pipets Durable ABS construction for scratch resistance and easy cleaning Strong magnets on both sides for secure mounting to most metal surfaces Rack can stand on flat surface without mounting Two included…

Corning Microcarriers are designed to simplify your scale-up processes. The microcarriers are sterile, ready to use, and available in closed systems packaging to be used directly with bioreactors. Additionally, the microcarriers are surface treated to enhance cell attachment, maximizing cell yield…

Autoclavable polypropylene (PP) construction for strength, buoyancy, and temperature resistance Racks float with full load of filled tubes Molded handle in center of rack for comfort and support during transport Legs allow rack to stand upright for use on benchtopUse in ice, waterbaths or…

Dimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

Rotating Wash Bottle Holder (H0382): Stay mobile with the Rotating Wash Bottle Holder; The sturdy handle provides comfort and control; Holds bottles up to 3” in diameter; Polycarbonate construction Rotating Two-Tier Lab Depot (H0381): Holds up to four wash bottles; Rotates 360° degrees;…

Polypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers

Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…