Corning PYREX® Kettles Designed for long life and maximum safety Wide mouth, which permits easy access to interior for cleaning Cover of heavy-pressed construction Lower sections are mold-blown for maximum resistance to mechanical breakage Offers a broad range of sizes …

Our OS6000 series STEM Omni Reaction Stations enable you to run up to 6 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS6000 series Omni Reaction Stations means that the same base unit (OSCA) can accommodate a variety of cartridges and…

Allow for visual observation of all reactions and aerosols under pressure PVC coated glass minimizes potential hazard Additional protection furnished with optional clear plastic shield - highly recommended 1/8” NPT Threaded hole in needle valve adaptor (4967A66, not included)…

These heating and stirring reaction blocks can be used for a wide rang of applications from simple synthesis to process optimization.p Six position reaction block designed for 57.5mm diameter vessels (also 40mm and other diameter vessels with appropriate adapter sleeves), and sample sizes…

Complete, one-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm…

The STEM RS1000 Reaction Station has 10 positions that can be programmed to run at the same temperature and stirring rate simultaneously. It can be used for a wide range of applications from simple synthesis in the laboratory to process optimisation in industry. Key Features 10 position…

Our OS1025 STEM Omni Reaction Station enables you to run up to 10 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS1025 Omni Reaction Station means that the same base unit (OSCA) can accommodate a variety of cartridges and sample volumes…

For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 S.S. tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides…

Solid phase peptide synthesis vessel having a medium porosity, fritted glass resin support. Top of the vessel has a GL thread and is supplied complete with a PTFE lined PBT screw cap. Lower stopcock is a "T";-Bore 2mm PTFE to allow nitrogen to be used to upwardly agitate the resin beads…

PTFE Baffle Cage, 4-Blade, 100mm ID Flange, for 1,000mL Vessel. PTFE insertable 4-blade baffle cage system for CG-1929-X series 100 and 150mm reactor systems. Baffle assembly has 4ea PTFE rectangular baffles attached 90 degrees apart to a 100 or 150mm flange ring. Flange ring is inserted between…

Our unjacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…

Glass filled PTFE adapter for use with the CG-1968-P zero dead space detachable valve. Adapts 1" beaded pipe to a 3/4" compression fitting for use with CG-1975 adapters and tubing. Requires a CG-1968-66 1" beaded pipe coupling.

Cylindrical, jacketed, peptide synthesis reaction vessel having a coarse porosity fritted resin support. The vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the corresponding lids. Lower…

Thomas No. 1160V24 This kit contains 1 reaction block (24x 2ml vial, 32X 0.3ml vial, 4X 2Dram vial), 1 decapper for 8 mm crimped vial and 1 syringe Hamilton 81000. Thomas No. 1160V25 1 reaction block (24x 2ml vial, 32x 0.3ml vial, 4x 2Dram vial) Thomas No. 1160V26 1…

Turnkey wiped film system for precise distillations.  Complete system includes 2-liter Jacketed Fill Funnel, all temperature control of the glass jacketed fill funnel, main body, condensor, cold fingers and cold trap. Powerful PTFE wiper stirring, deep vacuum, and professional Installation.

Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 3/4"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10; X 10° compound…

Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 1/2"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 3/4"; female NPT with 10°; X 10°;…

Features: Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools Chemically Resistant Perfluoro O-Rings on All CG-911-A and CG-511 Drain Valves Graduation Scale on Both Sides Showing the Approximate Volume Sidearm on Lower Drain…

Beaded pipe to sanitary fitting adapter connects to the 1" beaded pipe side arm of CG-1968-Q zero dead space drain valve. Approximate overall length of adapter is 2" (52mm). NOTE: Requires a CG-1968-66 beaded coupling.

Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

Pre-packaged, turnkey 20 liter and 50 liter reaction systems for research and production purposes. Systems feature jacketed vessels, multi-neck flask heads, Universal support stand, and either a rod mounted brushless DC stir motor in our 20 liter (IKA Eurostar 60 Control) or a flange mounted 3/8 hp…

ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…

100L Squatty, Low Profile, glass reactor system with 400mm flange. 100L glass reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Squatty Reactor System Features: More…

Adapter permits rotary evaporation of the contents of any of our CG-1880 pressure vessels after the reaction is complete. Adapter can also be connected to any vacuum line having a 24/40 port or used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples…

Ace Glass Scale-Up Series™ jacketed bench-top reactor base system includes the essential items needed to begin building a customized reator specifically for your application. Reactors scale-up from 100mL to 6000mL on the bench and their geometry translates into our Kilo Scale reactors. Base…

These hollow PYREX® 14/20 Standard Taper joint and bottle stoppers are closed at the bottom. They are interchangeable with standard taper joints and bottle stoppers of the same size. These hollow stoppers are light in weight, yet very strong to reduce chipping and breakage, thus minimizing…

Heavy wall pressure vessel is the same as CG-1880, but shaped similar to a round bottom flask with a #25 internal thread for use with a PTFE bushing as a pressure seal. Complete apparatus is supplied with vessel, back seal solid PTFE bushing and viton o-ring. Other vessel sizes and safety plastic…

50L Squatty, Low Profile, glass reactor system with 400mm flange, on our innovative Kwik Mount support frame.  Complete 50L Squatty Reactor System Features:  More Clearance: 50L Squatty Glass Reactor System with 400mm Flange Maximizes Clearance Under The…

Features Auto-Stop When Opening The Valve Anodized Aluminum Control Knob Zero Dead Space Perfluoro O-Rings On Tip And Plunger “Zero Dead Space” flush bottom valve is designed to prevent solids from collecting in the bottom of the vessel. The PTFE® drain valve…

Distillation kit for Chemglass 10 and 20L reactor systems. Supplied complete with support shelf to fit CG-1965-X style frame and the components listed in the link below. This add-on kit makes it easy to convert any of our standard reactors over to a complete distillation system. Items…