Evaporators

Compare Tool

Select up to 3 products

HomeAll Products

Evaporators

1 - 32 of 170
Sort
View
Show
  • The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included…

  • Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

  • Concentrates DNA/RNA, nucleotides, proteins and other samples quickly 1,400 rpm; 240 x g fixed rotational speed Compact footprint Motorless drive and sealed chamber Quiet operation even with pump on Narrow, 13" width saves valuable bench space. Three evaporation modes…

  • Evaporating Flasks Heavy wall, high quality evaporation flasks for SolventVap series rotary evaporators. Glass material: high borosilicate glass 3.3. Receiving Flasks Heavy wall, high quality receiving flasks for Ai SolventVap series rotary evaporators. Glass material: high borosilicate…

  • These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

  • Thomas Nos. 1203C84 and 1203C87 The newly developed product line from IKA® in ergonomic, compact design with innovative functions to improve operating results. Rotary evaporators with integrated heating bath HB 10 basic (3 litre) incl. dry ice condenser. Heating bath with adjustable…

  • The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

  • The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

  • Designed for use with all rotary and centrifugal evaporators Pumps are two-stage, oil-sealed and sliding vane with cast aluminum casing. Labconco XPress Laboratory Equipment Thomas number 4366R20 is part of Labconco's XPress Laboratory Equipment Program. These items are…

  • The 12 Position N-EVAP® nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying…

  • Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

  • Sample Concentrator

    Techne (Cole-Parmer)

    Fast efficient sample concentration Suitable for all tube configurations Compatible with Stuart three block heaters only A sample concentrator is a fast and convenient way of concentrating multiple samples in a block heater at once. Utilising a simple gas delivery system the sample…

  • Safely handle and recover solvents with the Savant™ SpeedVac™ Universal Vacuum Systems, equipped with an easy to use, wide-mouth glass condensation flask. This single integrated unit combines an oil-free vacuum source and refrigerated vapor trap, and can be connected to any of the…

  • These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.

  • Adapters permit the connection of standard laboratory dram sample vials directly to the vapor tube or a bump trap of a rotary evaporator. Adapters have a top outer joint of the listed size and a 20-400 G.P.I. thread at the bottom. A PTFE-lined, polypropylene, double-threaded connector attaches the…

  • Liquid Trap, is placed between the RapidVap and diaphragm pump to prevent liquids from entering the pump when using high boiling point solvents. Consists of borosilicate glass container with 2550 milliliter trapping capacity, two 1/2" diameter stems with elbows, foam insulation lid, and…

  • The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

  • Thermo Scientific™ Savant SpeedVac™ DNA130 is a compact, integrated vacuum concentrator designed for fast, efficient concentration of DNA and RNA applications. SpeedVac™ DNA130 vacuum concentrator will support sample preparations with ease and efficiency. Compact, easy to…

  • The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

  • The Mini Seal II semi-automatic plate sealer seals most types of plates, providing a tight seal on deep well plates. Complete with a powerful stepper motor control and 450 watts of heating power, the new MiniSeal II copes effortlessly with PCR, filter-bottomed, assay and deep well plates. Easy to…

  • Eppendorf Vacufuge plus vacuum concentrator was designed with you in mind to deliver an ergonomic, intuitive, and durable solution that fits comfortably right on your lab bench! An advanced heating technology provides the best treatment for your sample which assures quick, efficient and gentle…

  • A variety of accessories are available for use with Buchi evaporators

  • Thomas No. 1203D08 Industrial vacuum source for many different in-house users; usually fixed pipes. Thomas No. 1203D09 For single or multiple connection bench top diaphragm vacuum pump. High quality vacuum valve for an optimum controlled operation. The integrated check valve eliminates…

  • Thermo Scientific™ Savant™ SpeedVac™ SPD1030 and SPD2030 Vacuum Concentrators are fully integrated systems that combine concentrator, refrigerated cold trap, diaphragm pump and vacuum gauge in a single, compact unit. Convenience and Flexibility in two capacity ranges The…

  • Rapidly concentrates multiple samples New style, compact with small footprint Built-in vacuum delay Centrifuge up to 1725 rpm Easy-to-read digital control panel Epoxy coated aluminum base, acrylic lid, phenol-free gasket compliment this system. Optional “heat boost”…

  • Gently speeds evaporation of excess liquid Digital temperature control Autoclavable Evaporator system provides a low cost solution for the concentration of 96 well extractions and reactions. Each SS needle delivers and equal flow of nitrogen or other gas. The system gently speeds…

  • Central control of all process parameters The Interface I-300 is the central control unit for all process parameters of a Rotavapor® R-300 system. This includes rotation speed, temperature (heating, cooling, vapor) and pressure. Various distinct operating modes (e.g. automatic, dynamic,…

  • The 24 Position N-EVAP® is Organomation’s most adaptable evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can…

  • Easy to read large digital LCD display Large 5L heating bath with a temperature range of ambient to 180°C Detachable LCD operating panel for remote control purposes Speed range from 20 to 280 rpm The Scilogex RE100-Pro Rotary Evaporator fetaures a large to read large digital…

  • Sample Concentrator

    Techne (Cole-Parmer)

    Fits Dri-Block® Heaters Range: 25° to 200°C (dependent upon heater) Fully adjustable gas reservoir to suit the levels of liquid in sample tubes Gas chamber can be removed and dri block used for routine incubation and temperature control As sample is heated, gas…

  • Replacement Vapor tubes compatible with Buchi rotary evaporators. Thread is made for use with standard Combi-Clip. Available in the 4 listed sizes. NOT SUPPLIED WITH COMBI-CLIP.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.