This unique media is an analytical purity grade cellulose based paper designed for conveying powder or gelatinous paste samples to and from balances and instruments The material has sufficient structural integrity to resist tearing during quadrant folding or enveloping. The surface is highly…

Made of polystyrene. Commonly refered to as a 100 mm x 15 mm dish Free from optical distortion and sterile. These dishes are ideal for phage typing, susceptibility testing, plate counts, and probe assays. Each 13 mm grid is marked numerically in one direction and alphabetically in the…

100mm x 20mm 10/resealable bag 300/cs Uniform hydrophilic surface is ideal for consistent cell attachment Available in five diameters and three heights All dishes are supplied with lids 35mm dish has offset bottom for improved handling Lids contain molded spacers to allow gas…

Made of polystyrene Simport Petri dishes are available in a variety of shapes and sizes for use in routine procedures and with automated equipment. Economical, optically clear dishes are precision-molded from biomedical grade polystyrene so cultures are clearly visible without distortion.…

Borosilicate Glass Petri Dish with reinforced rims

Economical Smooth, strong and non-absorbent with glossy surface Especially suitable for weighing powders. Packs of 500 sheets.

Mortars with lips are glazed on the outside, except for the bottom. Pestles are glazed to grinding surface. Oversized pestle for easier grinding. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at…

MTC Bio Weigh Boats are made of antistatic polystyrene and will withstand temperatures to 90°C, as well as exposure to diluted acids, alcohols, bases and aqueous solutions. Their flexibility and smooth interior surfaces with rounded corners allow for easy decanting of powdered samples. Their…

Clear top and bottom viewing surfaces Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene Optically-clear Radiation sterilized Contents sterile if sleeve is unopened Ventilation ribs allow for free air…

CELLTREAT Tissue Culture Dishes are manufactured under the most stringent conditions in order to assure the integrity of your tissue and cell culture work. Class 100,000 clean room, USP class VI virgin polystyrene, and ISO 9001:2000 quality management systems all contribute to the consistent tissue…

These lightweight, low tare (0.15 g for 11mm and 0.45 g for 20mm) dishes are ideal for milligram weighing. The smooth aluminum surface ensures complete transfer. Use of balance-type forceps enables easy grasping. Liquids or solids may be transferred to this micro dish to be weighed. …

Made of anti-static polystyrene Available in small, medium, large For use with CPA Balances, Cubis™ Balances, Extend ED Balances, M-Power Balances, M-Prove Scales

General purpose sample holders. Translucent, rubberized polystyrene (plastic) withstands temperatures to 180°F, flexes for easy pouring. Biologically inert; resistant to dilute acids, aqueous solutions, alcohols, bases. For use with balances, microwave moisture analyzers, hundreds of other…

These flat, clear PYREX® dish bottoms will withstand repeated sterilization (wet or dry). The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space the side walls of the bottom and cover, thereby reducing the capillary action of the condensed…

Shallow glass dishes used for culturing bacteria and other general laboratory uses. Designed to meet Federal Specification NNN-D-1478. KIMAX® dishes remain clear after repeated use in wet or dry sterilization cycles Reinforced beaded edges resist mechanical breakage and help in…

Non-treated surface for molecular biology applications ANSI standard dimensions for instrument compatibility 1 Well HTS Petri Dish applications 4 and 8 Wells Assay compartmentalization Probe multiple gene sub-sets Wash Western blot strips 4 well dish holds four glass slides

Heavy gauge aluminum dishes with covers, may be used as a general sample container to protect samples during testing and storage. Dishes have straight sides and flat bottom. All dishes are supplied with snug fitting covers that fit either the top or bottom of dish for storage.

Unique patented design for easy handling and storage Easy to use. Opens easily with one hand, yet closes to a tight seal. Uses less space on the lab bench or in the incubator with easy stacking base Gamma irradiated for sterilization. No dangerous EtO residuals. Available with or…

Ideal sealing tape for petri dishes and microplates Stretches and conforms Waterproof and temperature and chemical resistant Resists abrasion and puncture while blocking vapor loss Reduces the rate of gas exchange and prevent the entry of contaminants

The Delta T™ Dishes have a number 1.5 thickness, German, Desag 263 glass coverslip bonded to the bottom of the dish for high N.A. applications and are also available with 0.5mm thick glass for low N.A. applications. They have an electrically conductive, optically transparent, ITO coating on…

Easily loaded and emptied from the top Single or three stack For 100-mm diameter dishes Epoxy-coated steel wire rack has a wide front opening that permits easy access but prevents dishes from sliding out. Not suitable for glass petri dishes. Dimensions for single stack rack (L x W x H): 108 x…

Small weigh boats have dimensions of 1.75 x 1.75 inches square x 0.375 inches high. Disposable, lightweight, with a stable flat bottom and turned gripping edge. These weighing dishes are easier to manipulate than unwieldy weighing papers or heavy glass or porcelain labware. Thin, no-wetting…

The ICD is a 35mm or 40mm diameter autoclavable and reusable culture dish made of a stainless steel ring into which a 30mm Desag 263, glass #1.5 coverslip is placed and retained by a leak-proof, silicone o-ring seal integrated into a 10m high polycarbonate threaded insert and includes 2 O-rings and…

Easy stacking Vented for better gas exchange Manufactured from crystal polystyrene for optimal analysis by microscopy Diameter: 35 mm; height: 10 mm For Research Use Only. Not for use in diagnostic procedures, unless otherwise indicated.

Standard slippable petri dish Designed for automated filling and streaking systems Side Arrows and ISO Mark Target for automation Disposable (single use) Polystyrene petri dish for general microbiological use Molded from medical grade virgin polystyrene Optically-clear Radiation…

labForce flexible polystyrene boats feature smooth surfaces to provide accurate pour-outs with minimal sample loss. Bend flexible boats at points to form pour spouts Flat bottoms and sloping sides provide accurate transfer Biologically inert and resistant to dilute and weak acids,…

150mm x 20mm 1/bag 60/cs Uniform hydrophilic surface is ideal for consistent cell attachment Available in five diameters and three heights All dishes are supplied with lids 35mm dish has offset bottom for improved handling Lids contain molded spacers to allow gas exchange and…

High clarity polystyrene Flat, transparent surface Stackable for easy storage and handling Sterilized by E-Beam Non-pyrogenic

These flat, clear Corning® petri dishes are made from Soda Lime Silica glass and will withstand repeated sterilization (wet or dry). Approximate dish bottom diameter and height is 142x22mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally…

Ideal for microbalances, organic micro elementary and thermal analysis, and pharmaceutical use. Our micro weigh boats are compatible with most commercially available analyzers and micro balances. Packaged in easy-to-use plastic containers for storage and dispensing.

Weigh Vessels are manufactured with an anti-stat treatment embedded into the plastic This long-lasting treatment will not rub off or dissipate over time, making the boats suitable for use with static affected materials Stable and flat bottoms allow for easy stacking and convenient storage