A single-use test pack designed to provide a challenge to 250°F gravity displacement and 273°F prevacuum sterilizers in modern hospital practice. Equivalent in performance to a biological indicator in the AAMI approved linen pack. Propper PASS/FAIL® Steam Challenge Pack PASS…

Label Applicators Direct reading dials on the label applicators allow the operator to set expiration date, sterilizer number, Julian calendar date, and load number according to the system used by the hospital. For use with Duo-Record® large labels. Each applicator is of a sturdy,…

Adhesive tape for use with dry heat sterilization. Use these tapes to enhance confidence that sterilization has occurred. Color changes from white to brown. Conforms with ISO 11140/2005

Propper self-adhesive tape is designed to distinguish processed and unprocessed items. Made of strong crepe-embossed paper with pressure-sensitive adhesive, the tape is ideal to secure different types of sterilization packs. Marking with permanent ink pen leaves no bleadding on the tape after sterilization.

Crosstex manufactures Bacillus subtilis (Cell Line 5230) Spore Suspensions utilized in low temperature (<121°C) steam sterilization processes. The Spore Suspensions are pure suspensions of spores with known steam resistance characteristics and a variety of population levels standardized per…

Monitoring your autoclave couldn’t be easier with the convenient SporAmpule. Easy to use! Process one or more SporAmpules, along with your normal load, then incubate at 55-60°C for 48 hours and observe for a color change. No activation, crushing, or additional culture media is…

Dry Heat Chemical Process Indicators (CPIs) are designed to signal, through a transition in color, when exposed to high temperatures such as dry heat and steam sterilization or depyrogenation processes. The CPIs will transition from the initial to the signal color depending on the temperature and…

For Exposure Control (1251T50) Peel-off, pressure sensitive labels For use in dry heat sterilizers Comply™ (ATI Sterilabel™) Sterilization Indicator Labels are for use in dry heat sterilizers 170°C (340°F) or above. Pressure-sensitive labels are for hard-surfaced areas such as unwrapped glass…

VERIFY™ Dual Species Self-Contained Biological Indicators (SCBIs) are for use in monitoring steam sterilization and ethylene oxide (EO) sterilization processes. Each SCBI is completely self contained within a vial and contains a disc inoculated with dual species bacterial spores (Geobacillus…

For monitoring the efficacy of steam, ethylene oxide gas, chemical vapor and dry heat sterilization processes used in healthcare facilities, body modification parlors and industry.  Biological monitoring is recommended weekly, but preferably daily, and with every load containing implants.…

For steam sterilization cycles of 250°F (121°C) and 273°F (134°C) OK® Strips are indicators that monitor all critical sterilization arameters: steam, time, and temperature. In sterilization cycles OK® Strips guard against incomplete steam penetration, presence of…

Propper BI-OK® self-contained biological indicators for Steam and EO gas are designed for sterilization efficacy monitoring in hospitals, clinics, and for industrial applications. After processing in a sterilization cycle and activation of media by crushing the glass vial, indicators need to be…

The SporView Self-Contained Biological Indicators (BIs) are approved for use in gravity, prevacuum, and flash cycles. SporViewPlus can also be purchased with 50 BIs and 50 STEAMPlus™ integrators per pack, for immediate release of routine or flashed loads. Final visual spore growth is recorded…

Ethylene Oxide (EO) Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General requirements,” for Class 1 Process Indicators. The purple-to-green color…

Crosstex manufactures Bacillus subtilis (Cell Line 6633) Spore Suspensions utilized in low temperature (<121°C) steam sterilization processes. The Spore Suspensions are pure suspensions of spores with known steam resistance characteristics and a variety of population levels standardized per…

Chemical indicator strips, for use with steam sterilizers, require a temperature of 132 to 135°C (270 to 275°F). Daily verification ensures that items being processed have been run through a cycle, preventing the accidental use of items that have not been adequately processed.

3M™ Comply™ Bowie-Dick Test Packs are used to monitor the performance of vacuum-assisted 132ºC - 134ºC (270ºF - 273ºF) steam sterilizers; test packs will reproducibly detect residual air in the sterilizer chamber due to air leaks, air removal failures and inadequate…

Process indicators are printed on the pouch corners and covered by the extension of the transparent film beyond the sealed area. This guarantees protection of the indicators from direct contact with metal trays or instruments, yet does not obstruct observation of the indicator color change. …

Radiation Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ANSI/AAMI/ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General Requirements,” for Class 1 Process Indicators. The color transitions are…

Kimtech™ Kimguard™ Sterilization Wrap is a must-have tool for sterile processing environments, such as in pharmaceuticals and medical devices. The line comes in six grades of wrap fabric, from KC 100 to KC 600, so you can get precisely the right protection for your needs. The…

Heat-Sealable Chex-All® Pouches are premium quality sterile packaging products designed to reduce the cost of sterilization processing. The pouches have independent indicators imprinted on both inside and outside of every pouch. While external indicators serve as process indicators, the…

A softer wrap for greater drape-ability Features: Efficient microbial barrier and provides for pack security Virtually lint free and has a tightly anchored fiber structure Does not delaminate and can be used on either side Excellent liquid repellency and is an effective…

Heat-Sealable Chex-All® Tubes are premium quality sterile packaging products designed to reduce the cost of sterilization processing. The tubes have independent indicators imprinted on both inside and outside of every roll. While external indicators serve as process indicators, the internal…

Steam Sterilization Monitor Strips are used for evaluating sterilization process. These indicators which are specified by the U.S. military specification MIL-S- 36586 are GMP requirements of U.S. FDA. Appearance: Filter paper strip impregnated with spores of standard culture of…

Steam Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General requirements,” for Class 1 Process Indicators. The blue-to-pink color transition is…