Eppendorf Safe-Lock Tubes are the result of 50 years of continuous improvement and development. The original Safe-Lock tubes protect your sample with excellent centrifugation stability, feature perfect sealing properties, and reliably prevent sample evaporation. Trust in the original Eppendorf…

When quality matters choose the AMPLITUBE™ Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms…

Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

Labcon SuperClear® precision-molded, conical and round bottom tubes are perfect for a multitude of general laboratory uses. Precision crafted of extra clear virgin polypropylene in natural and colors or clear virgin polystyrene. Tube caps are made of low density polyethylene for a secure seal…

DNA LoBind Tubes maximize sample recovery of nucleic acids by significantly reducing sample-to-surface binding. The ideal solution for sample preparation and long-term storage of your precious samples! DNA LoBind tubes improve recovery of nucleic acids by reducing their absorption to the tube…

With lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.

Labcon SuperClear® precision-molded, conical and round bottom tubes are perfect for a multitude of general laboratory uses. Precision crafted of extra clear virgin polypropylene in natural and colors or clear virgin polystyrene. Tube caps are made of low density polyethylene for a secure seal…

Microtube, 0.65mL, GREEN, PK/1000

Translucent polypropylene copolymer provides greater chemical resistance than polycarbonate and can be autoclaved repeatedly. Contact-clear tubes allow easy view of contents. Can be used up to 50,000 x g in refrigerated and non-refrigerated centrifuges. Before autoclaving, just set closure on top…

Globe Scientific's plastic culture tubes are produced in polystyrene (PS) or polypropylene (PP). The polystyrene tubes can withstand 1500 RPM during centrifugation. polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Tubes with dual position snap caps (LDPE)…

Eppendorf Protein LoBind Tubes are specifically designed for use in proteomics or other fields of protein research, where protein concentration tend to be very small and sample recovery is vital for assay results. Significantly more protein can be recovered for downstream analyses and enzymes…

Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand…

1.5ml and 2.0ml microcentrifuge tubes are easy to open with leak-proof tight seal cap. Withstand 21,000xg. Clear and clarify for easy viewing and graduation with writing area. Certified for DNase, Rnase, DNA, PCR inhibitor, and pyrogen free. Available in sterile and non-sterile choices. …

Screw cap, flat bottom, borosilicate glass (9215J30 and J50) Suitable for tissue culture and routine bacteriological work Flat bottom allows tube to stand unsupported 9215J30 tube takes size 15-415 cap; case of 1,000 contains four packages of 250 9215J50 tube takes size 18-415…

Eppendorf Safe-Lock Tubes are the result of 50 years of continuous improvement and development. The original Safe-Lock tubes protect your sample with excellent centrifugation stability, feature perfect sealing properties, and reliably prevent sample evaporation. Trust in the original Eppendorf…

Labcon Disposable 15mL Urine Centrifuge Tubes have visible graduations and fit standard centrifuge rotors. Tubes are available in durable polypropylene and ultra-clear polystyrene versions. Caps are made from low- density polyethylene. For benchtop low speed clinical centrifuges Without…

ClearSeal™ sterile screwcap microtubes come in a variety of sizes, cap configurations, graduation options, and even a loop-cap option for the 2.0mL. Made from ultra-clear polypropylene, these screwcap microtubes include assembled caps with silicone O-rings that assure a leakproof seal from…

KIMBLE CHASE micro-hematocrit tubes are used to measure t he vo lume percentage of red blood cells in blood.   ·          Packed in plastic vials with reclosable snap-lock caps to maintain cleanliness ·…

2.0mL SuperClear® Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side…

Perform critical cellular applications with Thermo Scientific™ Nunc™ 14mL Round-Bottom Tubes. Features: Optimized gas exchange with dual position vent/close cap Off-gas volatile organic compounds easily with breathable packaging Certificates of conformity available…

Fits 13mm glass evacuated blood drawing tubes Fits most 12mm plastic test tubes Dual tabs for easy removal Polyethylene (PE)

Autoclavable Non-scratching Tapered sides permit nesting Baskets are ideal for applications such as sterilization, incubation and storage. Molded, one-piece design has a mesh opening of 9.5 mm.

Graduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…

BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

Sterile culture tubes are precision molded from premium-grade, chemically inert plastic materials: polystyrene (PS) for clarity and nearly-transparent polypropylene (PP) for toughness and chemical resistance. All tubes are packaged in easy-to-open bags of 25 tubes each. All tubes are gamma…

Globe Scientific offers an extensive line of mulit-use test tubes. They are molded from premium grade polystyrene for clarity or of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene…

Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

A Pocket size universal tube reader with two ruled charts for precise determination of micro-hematocrit values. Measures red cell layer in terms of packed cell volume. Designed for use with capped or sealed 75mm microhematocrit capillary tubes. Made of durable vinyl-laminated plastic for…

Polypropylene tubes include blue HDPE leak-proof screw caps. The tubes and caps feature specially-designed flat threads for vacuum-type closure that is leak-free at a press of >700mm Hg. Highly smooth hydrophobic internal surfaces minimize wall effect. Silk-screen graduations and a frosted…

Tubes are suitable for tissue culture work and general bacteriological use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular…