Test Tube Racks

Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for...

Dimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples to be incubated at the same temperature...

The Reversible 96-Well Tube Rack has easy-to-grasp tabs for sample handling and storage. Accommodates 96 wells for 0.5 mL tubes on one side and 96 wells for 1.5/2.0 mL tubes on the reverse side New vibrant colors! Raised rings around the 1.5 to 2.0 mL wells make tubes easier to remove Molded Grid...

These PP boxes are a more durable alternative to foam racks. Boxes are autoclavable. These centrifuge tube boxes offer a reliable and efficient way to store and organize your laboratory tubes. Designed to withstand daily lab conditions, they provide secure protection for your samples. The boxes are...

Sturdy racks for transport or sample handling These compact chemical-resistant, epoxy-coated steel wire racks have a slotted bottom for better drainage and handling. Ideal for conical centrifuge tubes but can be used to hold other types and sizes of tubes. The 15 mL rack has 20 mm holes; 50 mL rack...

Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows choice of 3...

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work...

Made for measuring sand and other settled matter in water and sewage, these Imhoff cones are molded of glass-clear, unbreakable styrene acrylonitrile. Use a Poxygrid® cone rack to support three or four Imhoff settling cones in a single row for clearer viewing. Cones have continuous graduations...

Ideal for washing and storing test tubes Use these lightweight yet strong baskets with mechanical washers and autoclaves. Durable construction will withstand repeated use in the lab.

Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree of...

These reversible racks are designed to keep 0.5mL and 1.5mL( up to 2.0mL) microcentrifuge tubes organized and upright. Made of polypropylene, choose the blue rack for 60 tube capacity (5 rows of 12 tubes) or the larger orange rack for 96 tube capacity (8 rows of 12 tubes). Both racks have...

Polypropolyne material Individually wrapped Can be assemble or disassembled

These new tube boxes have a removable white tube tray that can be kept filled with crushed ice or other temperature controlling materials. They also have a translucent cover. Temperature sensitive samples and assays in microtubes can be processed with an extra degree of temperature stability....

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical...

labForce® benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. A 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is needed. A combo rack...

BetterBox™ is an all new autoclavable polypropylene storage box, exclusively designed to hold 81 x 1.5mL or 2.0mL microtubes neatly and securely in nine rows of nine tubes (snap cap or screw cap tubes fit equally well). The lid cannot become separated or lost thanks to the sturdy hinge and...

Eliminates spills Easy to clean Unit is dishwasher safe Plastic grid cushions and protects against breakage and scratches. Grid cuts drying time in half by promoting air circulation. Rack measures 16 1/2” x 13” x 5/8” and weighs 1 lb.

Perfectly Sized for Beakers Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly pressing down against...

The Denville upright freezer drawer rack measuring 20 Inch x 4 Inch x 5 Inch, is suitable for use with 2 Inch boxes.

Features channels designed for more configuration and to protect against breakage Drying Basket to keep small items and slotted to hold pipettes safe while drying SureGrip Hook with Patent-pending design to securely grips glassware into place Use on counter or wall: Stands alone on integrated hinged...

labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations.  Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.

Float in small baths as well as large vessels Brightly-colored, high-density polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique “X” slits...

labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations.  Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.

Drying Rack, Pegboard, Epoxy, Glassware Epoxy pegboards come standard in black, 1" thick material. A stainless steel drip trough (sold seperately) can be easily mounted to the bottom edge to provide excellent draining capacity. Please note: Units do not include a wall attachment and require...