Water Quality

3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner and...

Insta-Test® strips are available to perform checks for water quality factors. Test strips are a quick way to monitor water without having to use reagents.

Detergents can be introduced into the water supply by industry, soap manufacturers, and private households. Environmental analysts often include a determination of anionic detergents when assessing surface water pollution. The Methylene Blue Method References: USEPA Methods for Chemical Analysis of...

Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron...

7831 Octet Comparator Sufficient for 50 tests Tungstophosphoric and molybdophosphoric acids are reduced by tannins and lignins to form a blue color. Octet Comparator has color standards representing 1, 2, 3, 4, 5, 6, 8 and 10 ppm Tannin or lignin-like substances.

Test kit chemistries are convenient-to-use tablets. Rapidly dissolving, long shelf-life, tablets allow chemistry to be added to sample without reagent loss.

Tube test for the determination of COD. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: COD - 15–160 mg/L O2

The MColortest Color-matching vessel is specifically designed for hydrazine detection in water using test kit 108017. It provides a reliable and accurate method for comparing color changes during the testing process. With its clear and precise design, it facilitates easy observation and...

UN Number: UN3316

QUANTOFIX Phosphate semi-quantitative test strips for the determination of Phosphate. Measuring range: 0-0.5-2-5-10 mg/L

Standard test for the determination of Copper. Reagent kit for highly sensitive photometric measurements with low costs per sample. Pre-programmed on NANOCOLOR photometers. Measuring range: Copper - 0.01–10.0 mg/L Cu²?

7625 CAS Dropper Pipet Sufficient for 50 tests at 20 ppm 1 drop = 1.25 ppm HEDP 1 drop = 1.4 ppm PBTC Chromazurol S method may be used for Dequest, Bayhibit, Belcor 575 and Belsperse 161 phosphonates. Indicator changes from yellow to pink at the pH ideal for the reaction, then thorium nitrate is...

Tube test for the determination of Vicinal diketones. Precise rapid tests for all kind of water and waste water analysis. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Diacetyl - 0.015–0.600 mg/kg Diacetyl

Phosphorus occurs naturally in rock formations in the earth's crust, usually as phosphate. High phosphate concentrations in surface waters may indicate fertilizer runoff, domestic waste discharge, or the presence of industrial effluents or detergents. Although phosphates from these sources are...

Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron...

Tube test for the determination of easily liberated cyanide. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Cyanide - 0.01–0.40 mg/L CN?

QUANTOFIX Copper test strips for rapid and easy analysis of Copper directly on-site. Measuring range: 0-10-30-100- 300 mg/L Cu+/2+

QUANTOFIX Multi stick for aquarium owners are the semi-quantitative test strips for the determination of the total hardness (Ca 2+ , Mg 2+ ), carbonate hardness (HCO 3 -, CO 3 2-) and the pH value of aquarium water. Measuring range: 0-6.3-12.5-18.8-25.0-31.3 °e (total hardness)...

Sulfides are naturally present in ground waters as a result of leaching from sulfur-containing mineral deposits. Surface waters do not usually contain high sulfide concentrations. Sulfides result from the decomposition of organic matter, from bacterial sulfate reduction under anaerobic conditions...

Test strips for high sensitive semi-quantitative determination of iron. Measuring Range: 0.05 - 1.0 mg/L Fe2+/3+ (visual). Gradation: 0 - 0.05 - 0.1 - 0.2 - 0.5 - 1.0 mg/L Fe2+/3+

The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA. Features Fast: Most tests can be...

Method: colorimetric with test strips and reagents 10 - 25 - 50 - 100 mg/l Ca 2+ MQuant™ UN Number: UN3316 Storage class: 5.1B Oxidizing hazardous materials Storage: Store at +2°C to +8°C. Hazard: Corrosive The calcium test is suitable for rapid determination of calcium in aqueous...

Tube test for the determination of Cyanide. Precise rapid tests for all kind of water and waste water samples. Time-saving and reliable analysis together with Macherey-Nagel NANOCOLOR photometers. Measuring range: Cyanide - 0.02–0.80 mg/L CN?

The COBALT TEST is designed for the accurate determination of cobalt concentrations in water samples. These test strips provide a quick and straightforward method to monitor cobalt levels, ensuring environmental and industrial compliance. The colorimetric measurement is easy to read, allowing for...