Laboratory Tubes

Made of crystal clear polystyrene, these 12x75mm labForce® FlowTubes™ are designed for Fluorescence Activated Cell Sorting/ flow cytometry equipment including FACS systems from BD Biosciences.   The diameter and wall thickness of the tube's neck is held to very tight tolerances to...

Individual PCR tubes feature evaporation-resistant, easy-to-open-and-close lids that prevent sample loss. Ultra-thin, uniform wells ensure optimal heat transfer and reaction efficiency. Dome, frosted flat, or optically-clear caps for qPCR (real time). Conveniently packaged in reclosable bags to...

Our borosilicate glass Test Tubes have rolled rims and uniform wall thickness. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.

Thin Wall PCR Strip Tubes & Caps - 12 Strip Available with dome caps or optically clear flat caps (for real-time PCR) Available in clear, assorted, or white tubes (real-time compatible) Convenient combo pack of tubes and caps -- no need to purchase separately Deep seating caps provide a...

Thin Wall PCR Strip Tubes & Caps - 8 Strip Available with dome caps or optically clear flat caps for real-time PCR Available 0.2ml dome or 0.1ml low profile/"Fast" thermal cyclers (1149Z81) Available in clear or assorted Convenient combo pack of tubes and caps -- no need to purchase...

Compatible with QIAGEN®/Corbett Rotor-Gene® Instruments. Certified free of detectable RNase DNase, DNA, PCR inhibitors, and tested pyrogen-free. 4 Tube Strip & 4 Cap Strip (250 strips of 4 caps, 250 strips of 4 tubes per unit)

Boil-proof cap Withstand 28,000 x g Easy to open, easy to close Double, high pressure locking ring RNase, DNase and pyrogen free Unsurpassed clarity Frosted writing surface and graduations Ultra smooth interior-low liquid retention Made from highest quality, virgin, single melt polypropylene Our...

Borosilicate glass Capacity: 6.5 mL Narrow tip 15 mL shields Graduations (mL): stem to 0.4 in 0.01 from 0.4 to 1 in 0.1 at 1.5, 2.0, 3.0, 4.0 and 6.5 (body)

With lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.

1.5mL Easy-Click Graduated Microcentrifuge tubes feature a small, easy-to-open cap. Graduated every 100µL for easy volume identification Small cap allows tubes to be spaced closely together in racks and storage boxes Frosted Cap and writing panel allows for an extra writing room and is...

Polypropylene tubes include blue HDPE leak-proof screw caps. The tubes and caps feature specially-designed flat threads for vacuum-type closure that is leak-free at a press of >700mm Hg. Highly smooth hydrophobic internal surfaces minimize wall effect. Silk-screen graduations and a frosted...

8 Strip Split-Strip with attached individual dome caps Available in specific colors (blue, green, red, and yellow) Split-a-part design is easy to break allowing you to use only the tubes that you need Conveniently stacked in bags of 12 strips per bag (10 bags per unit) minimizes the risk of...

For customers who prefer separate caps with their 8 strip tubes.  The Zipper-strip has one end of the caps attached to the tubes.  This prevents unintentional reversing of the caps minimimizing chances of cross-contamination. Available in 0.2mL size to fit most standard thermal cyclers....

15mL & 50mL Conical Tubes High-clarity, medical-grade polymer Graduations every 1 mL (15 mL tube) or 5 mL (50 mL tube) increments Rated to 15,000 x G Temperature range: -80° to 40°C Tube racks are recyclable Both 50mL and 15mL tubes are BQ215 presented 25 tubes per rack Sterile and...

Available in 8 and 12 strip caps Available in both flat and dome caps Flat caps are optically clear for real-time PCR Tested to insure fit on both strip tubes and PCR plates Certified free of detectable RNase DNase, DNA, PCR inhibitors, and tested pyrogen-free

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly...

0.2mL Thin Wall PCR Strip Tubes & Dome Caps - 8 Strip Available in specific colors (blue, green, red, yellow) Convenient combo pack of tubes and caps -- no need to purchase separately Deep seating caps provide a reliable, consistent seal to eliminate evaporation Thin walls allow for efficient...

Polypropylene or polystyrene Standard sizes Sterile or non-sterile Available with or without snap cap Thomas Culture Tubes can be used for almost any laboratory procedure. They are chemically free and biologically inert. These tubes are precision molded from premium grade materials and checked under...

8 Strip Rigid Strips with attached individual caps - 0.2mL Available in specific colors (blue, green, red, and yellow).  All caps are flat and optically-clear for realtime PCR assays Rigid design is easy to work with minimizing the need to work with a PCR rack Conveniently stacked in bags of 12...

Thin Wall PCR Strip Tubes & Dome Caps - 12 Strip Available in specific colors for easy sample identification Convenient combo pack of tubes and caps -- no need to purchase separately Deep seating caps provide a reliable, consistent seal to eliminate evaporation Thin walls allow for efficient...

KIMAX tube designed for field use in testing petroleum. Calibrated to contain. Scale and legend are durable white ceramic enamel. Top is tooled to accept a Snap Cap (28150R-6) Graduated in %. 100 mL equals 200%

Conical Centrifuge Tubes – developed with researchers in mind: Premium, high quality conical tubes developed for functionality, flexibility, and ease of use in the lab Environmentally friendly: recyclable plastic rack reduces waste in the lab Reduced contamination risk: New plastic rack...

Available in 8 and 12 strip tubes (note these caps must be purchased separately) Available in standard 0.2mL or 0.1mL low-profile/"fast" formats. Available in clear or assorted colors Certified free of detectable RNase DNase, DNA, PCR inhibitors, and tested pyrogen-free

INDUSTRIAL QUALITY || 12ml (0.4oz) Test Tubes made of high quality, heavy duty, Borosilicate 3.3 glass THIN WALL || Uniform wall thickness of 1mm provides excellent thermal shock resistance RIMLESS || Flat, fire polished rims make these tubes ideal for culture testing THERMAL SHOCK RESISTANT ||...