ICP-MS
-
The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…
-
Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
Microflow Nebulizer
Agilent TechnologiesThe Agilent Technologies microflow nebulizer with an uptake rating of 400 is made from strong PFA for added strength and is self-aspirating in nature. It works well with aqueous, HF acid, organic solvents and strong acids. Application: For PerkinElmer ICP-MS. High Performance, Clog Resistant,…
-
Spray Chamber Connector
Agilent TechnologiesThe Agilent Technologies spray chamber connector is made from EzyLok technology that helps in preventing any kind of penetration and is used with jacketed spray chamber. Application: For Jacketed Spray Chamber. Suitable for PerkinElmer ICP-MS This product is only available to U.S. Domestic…
-
PFA-Sapphire Injector Assembly
Agilent TechnologiesAgilent quartz, sapphire, and alumina torch injectors, and injector support adapters for PerkinElmer NexION 300/350 & ELAN 9000/6x00/DRCs ICP-MS instruments. Achieve guaranteed performance with supplies for PE from Agilent that are equivalent to the PerkinElmer ICP-MS versions so you can use…
-
Nebulizer Male Barb Fitting
Agilent TechnologiesPerkinElmer, Fitting, male barb, chlorotrifluoroethylene CTFE, for sample inlet fitting used with type A/C/K nebulizers. Suitable for ELAN 9000/6xX00/DRC and NexION. Application: For Sample Inlet Fitting used with Type A/C/K Nebulizers. Suitable for Elan 9000/6Xx00/DRC & NexION This product is…
-
GemCone High Dissolved Solids Nebulizer
PerkinElmerHigh solids Gem Cones are for samples with high dissolved solids (up to 20%). This cone spray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer. Gem Cone nebulizers require an end cap for use with Ryton Scott Spray Chambers. High…
-
Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safely and easily restored to optimum performance with a revolutionary new cleaning instrument - the Eluo. The Eluo is designed to efficiently deliver a cleanser through the nebulizer…
-
Fused Silica Obstruction Removal Kit for ST type Nebulizers. Used to clear blockage from ST type nebulizers. Inc Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final…
-
Total consumption neb. for capillary LC
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
3-Slot Quartz Organics Torch for Optima 7300 V
PerkinElmerDemountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
Demountable Torch
Agilent TechnologiesAgilent torches and accessories are fully compatible with your PerkinElmer ICP-MS. The high efficiency demountable quartz torch operates at 25% reduced argon gas flow compared to the demountable quartz torch. The standard Agilent guarantee applies to our chemistries and supplies for PerkinElmer…
-
Laminar flow spray chamber addition gas tee, with F5 fittings and 1/4 PFA gas line fitting, for NexION 300 and 350 ICP-MS series instruments.
-
Concentric MicroMist Nebulizer
Agilent TechnologiesThe Agilent Technologies concentric micromist nebulizer measuring 0.5 m ID x 1.3 mm OD is compatible to use with 700 mm sample tubing. This nebulizer with an uptake rating of 200 is made from strong borosilicate and conforms well with aqueous, HF acid, organic solvents and strong acids. …
-
Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
The SeaSpray ™ concentric nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization ef ciency for trace level analyses. It offers freedom from clogging while nebulizing solutions to the limit of solubility of most mineral salts and conferring significant…
-
The MEINHARD concentric glass nebulizers reflect exacting standards in design and manufacturing. They provide excellent sensitivity and precision for aqueous solutions and samples with few dissolved solids (less than 1%). MEINHARD nebulizers for Optima instruments include Standard Nebulizer…
-
MicroFlow nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport efficiency and high sensitivity. The PFA-ST3 Nebulizer is designated for superior clog resistance and higher sensitivity compared to the standard PFA nebulizer. • All PFA…
-
O-ring kit for Concentric Neb. (10 ea)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Consumables Kit for ELAN DRC-e/9000
PerkinElmerThis kit includes: ELAN Cross-Flow Nebulizer Tip Kit, Qty. 1 (N8120515) 0-Slot Quartz Torch, Qty. 1 (N8122006) 2.00 mm I.D. Alumina Injector, Qty. 1 (N8126041) Nickel Skimmer Cone, Qty. 2 (WE021137) Nickel Sampler Cone, Qty. 2 (WE021140) Sampler Cone O-Ring, Qty. 5 (WE012687) Series II…
-
The D-Torch is a revolutionary new demountable torch design with interchangeable outer Tubes. Quartz outer Tubes are ideal for most aqueous samples, while ceramic outer Tubes last longer for samples with high dissolving solids or for organic applications, such as wear metals in engine oils.
-
1-Slot Quartz Torch for Optima 8x00
PerkinElmerDemountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
This kit includes: 46 cm Copper Refrigeration Tube, Qty. 1 (W1038883) Brass Nut for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011094) Brass Back Ferrule for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011095) Brass Front Ferrule for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011096) Coil Forming…
-
The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…
-
Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow…
-
Low-Flow GemCone for Optima 3X00 Nebulizer
PerkinElmerCan be used with either the glass Cyclonic spray chamber or the Ryton ® MEINHARD ® end cap. RequiresMEINHARD ® End Cap II, P/N N0680504, when used with the Ryton ® double-pass, Scott-type spray chamber(glass or Ryton).
-
MicroFlow neb. PFA (200) w/I-AS probe
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Torch Injector
Agilent TechnologiesAgilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…
-
Demountable Torch
Agilent TechnologiesAgilent torches and accessories are fully compatible with your PerkinElmer ICP-MS. The high efficiency demountable quartz torch operates at 25% reduced argon gas flow compared to the demountable quartz torch. The standard Agilent guarantee applies to our chemistries and supplies for PerkinElmer…
-
Baffled Spray Chamber
Agilent TechnologiesThe Agilent Technologies baffled spray chamber has a cyclonic design with a ball joint and the borosilicate glass construction endures heavy impacts. Application: For ELAN DRC/DRC Plus/DRC II, PerkinElmer ICP-MS Instruments This product is only available to U.S. Domestic Customers. For…
-
Adjustable Torch O-Ring Kit for Avio 200/500
PerkinElmerThis kit includes: O-Ring 20.3 mm I.D., Qty. 2 (09902223) O-Ring 2.57 mm I.D., Qty. 2 (N0791334) Plastic O-Ring Removal Pick, Qty. 1 (09220410)
-
Spray Chamber for UHMI, 7900 ICP-MS 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.