Sterilization Indicators

Compare Tool

Select up to 3 products

HomeAll Products

Sterilization Indicators

1 - 32 of 59
Sort
View
Show

Attention Thomas Scientific Customers

Due to current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

  • 1251D01 detects the presence of Bacillus stearothermophilus spores 1251D07 detects the presence of Bacillus subtilis spores 1251D01 indicators are designed for monitoring 270°F (132°C) gravity steam sterilization processes. Detection media will turn yellow in the event of a…

  • O.K.® Sterilizer Bags

    Propper Manufacturing

    These all-paper, high quality, gusseted sterilization packaging bags are available in three sizes and are manufactured to meet stringent requirements. The exterior of each bag carries a pre-printed process indicator to allow easy identification of packs that have been subjected to the steam…

  • High quality tape specially designed for steam autoclave conditions. Indicator tapes provide immediate identi cation to verify exposure to sterilization process. Easy to read color change indicator 60 yards rolls Available in multiple widths Designed for use at 250°F…

  • For monitoring the effectiveness of steam sterilization at 121°C for 15 minutes Easy-to-read; media’s color changes with growth Rapid results; read after 24 hours Sterikon ® Plus indicators contain nutrient broth, sugar, a pH indicator and spores of apathogenic bacillus…

  • Adhesive tape for use with dry heat sterilization. Use these tapes to enhance confidence that sterilization has occurred. Color changes from white to brown. Conforms with ISO 11140/2005

  • Verifies the sterility of your instruments, glassware and other products in just two days Simple, three step process Run indicator through standard sterilization cycle; compress plastic vial to break glass ampule inside and then incubate for a minimum of 48 hours. When complete,…

  • Use with EtO, steam, gamma irradiation, E-beam sterilization technology. Highest bacterial filtration efficiency (BFE) available. Highly permeable - no wet packs. Bacterial barrier to both airborne and waterborne contamination. Outstanding liquid repellency - water, alcohol, iodine. Even…

  • Cardinal Health™ Paper Sterilization Pouch combines a blue film and a medical grade paper to provide breathability, sterile barrier, and indication of processing. Each pouch includes an external process indicator for Steam and Ethylene Oxide (EO) Gas sterilization. To assist opening, a…

  • Dry Heat Chemical Process Indicators (CPIs) are designed to signal, through a transition in color, when exposed to high temperatures such as dry heat and steam sterilization or depyrogenation processes. The CPIs will transition from the initial to the signal color depending on the temperature and…

  • Radiation Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ANSI/AAMI/ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General Requirements,” for Class 1 Process Indicators. The color transitions are…

  • Sterilization Indicator Tapes

    Propper Manufacturing

    Propper self-adhesive tape is designed to distinguish processed and unprocessed items. Made of strong crepe-embossed paper with pressure-sensitive adhesive, the tape is ideal to secure different types of sterilization packs. Marking with permanent ink pen leaves no bleadding on the tape after sterilization.

  • Gas-Chex® EO Gas Indicator Tape

    Propper Manufacturing

    Designed for universal application: specifically formulated adhesive provides secure bonding with fabric and non-woven wraps, paper, metal and glass. The words "Gas" will change from Red to Green indicating that the pack has passed through the Ethylene Oxide sterilization cycle.

  • 3M™ Comply™ Bowie-Dick Test Packs are used to monitor the performance of vacuum-assisted 132ºC - 134ºC (270ºF - 273ºF) steam sterilizers; test packs will reproducibly detect residual air in the sterilizer chamber due to air leaks, air removal failures and inadequate…

  • Monitoring your autoclave couldn’t be easier with the convenient SporAmpule. Easy to use! Process one or more SporAmpules, along with your normal load, then incubate at 55-60°C for 48 hours and observe for a color change. No activation, crushing, or additional culture media is…

  • Chex-All® Sterilization Tubes

    Propper Manufacturing

    Heat-Sealable Chex-All® Tubes are premium quality sterile packaging products designed to reduce the cost of sterilization processing. The tubes have independent indicators imprinted on both inside and outside of every roll. While external indicators serve as process indicators, the internal…

  • Strate-Line Sterilization Indicator Strips are an economical alternative to OK strips and are designed for monitoring steam sterilization cycles at 250°F (121°C) and 273°F (134°C). It uses the same reactive ink as the OK strip. The correct endpoint is indicated when the…

  • The Vapor Line® integrator is a chemical indicator for monitoring the essential conditions of steam sterilization processes - saturated steam, temperature, and time in gravity displacement and pre-vacuum sterilizers operating in the 250°F - 272°F temperature range. The integrator…

  • The SporView Self-Contained Biological Indicators (BIs) are approved for use in gravity, prevacuum, and flash cycles. SporViewPlus can also be purchased with 50 BIs and 50 STEAMPlus™ integrators per pack, for immediate release of routine or flashed loads. Final visual spore growth is recorded…

  • Kimberly-Clark has six grades of wrap fabric—from KC100 to KC600—to offer precisely the right protection for your needs. Choosing is easy; the higher the number, the stronger the wrap. KC600 Kimguard* Sterilization Wrap is the sixth of six strengths of sterilization wrap. …

  • For Exposure Control (1251T50) Peel-off, pressure sensitive labels For use in dry heat sterilizers Comply™ (ATI Sterilabel™) Sterilization Indicator Labels are for use in dry heat sterilizers 170°C (340°F) or above. Pressure-sensitive labels are for hard-surfaced areas such as unwrapped glass…

  • Hydrogen Peroxide Chemical Process Indicators (CPIs) are manufactured to meet performance specifications as described in ISO 11140-1 “Sterilization of health card products - Chemical indicators - Part 1: General Requirements,” for Class 1 Process Indicators. Hydrogen Peroxide CPIs are…

  • Gas-Chex® Sterilization Indicators

    Propper Manufacturing

    Gas-Chex® Sterilization Indicator Strips have the easiest-to-remember color scheme: Red for Stop (pack was not yet processed or the process was inadequate), and Green for Go. Gas-Chex® Strips are suitable for monitoring gas concentration and exposure, and are especially suitable for…

  • For monitoring the efficacy of steam, ethylene oxide gas, chemical vapor and dry heat sterilization processes used in healthcare facilities, body modification parlors and industry.  Biological monitoring is recommended weekly, but preferably daily, and with every load containing implants.…

  • Twindicator® is an indicator designed for monitoring all critical parameters of steam sterilization cycles at 250°F (121°C) and 273°F (134°C). Twindicator® adds extra flexibility in sterilization monitoring: each 8” strip is perforated to allow for two 4” strips.…

  • Steam Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General requirements,” for Class 1 Process Indicators. The blue-to-pink color transition is…

  • Sure-Check Pouches with built-in internal/external multi-parameter steam sterilization indicators confirm all sterilization criteria—time, temperature and presence of steam. Until now, due to limitations in technology, sterilization pouches have had only single parameter chemical…

  • Ethylene Oxide (EO) Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General requirements,” for Class 1 Process Indicators. The purple-to-green color…

  • BI-OK® Steam Test-Pak™

    Propper Manufacturing

    Sterilization processing of hospital goods can be tedious and error-prone. When you need the ultimate biological test for steam autoclave effectiveness, choose the BI-OK® steam test-pak™ - your guarantee of sterilization efficacy. With BI-OK® steam test-pak™ you can rest assured…

  • Steri-Wrap® II

    Propper Manufacturing

    A softer wrap for greater drape-ability Features: Efficient microbial barrier and provides for pack security Virtually lint free and has a tightly anchored fiber structure Does not delaminate and can be used on either side Excellent liquid repellency and is an effective…

  • Steam Dot® Blu™ Indicators

    Propper Manufacturing

    Steam Dot Blu™ utilizes the latest in environmentally friendly inks: the Blu™ ink technology. All products made with Blu™ inks are free of all heavy metals, including lead.  Environmentally Friendly Technology: Manufactured without lead & heavy metals …

  • VERIFY™ Dual Species Self-Contained Biological Indicators (SCBIs) are for use in monitoring steam sterilization and ethylene oxide (EO) sterilization processes. Each SCBI is completely self contained within a vial and contains a disc inoculated with dual species bacterial spores (Geobacillus…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.