With attached polypropylene cap Durable container with good chemical resistance 30 to 1000 mL sizes Pre-attached caps available lined or unlined Autoclavable General storage containers are suitable for use with powders and solids.  The large surface area on these jars makes it easy to label,…

Nalge 2118 Polypropylene with polypropylene screw closure. Translucent jars are repeatedly autoclavable, with excellent chemical resistance.

Ideal for use in soil, sediment and sludge sampling. Preassembled with .015" PTFE or F217 lined closed top white polypropylene closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Nalge 2117 Autoclavable jars offer glass-like clarity with good chemical resistance Polymethylpentene with polypropylene screw cap Straight sides Excellent museum jars; formaldehyde loss is only ≈2% a year 125 and 250 mL sizes have Mason jar threads and are useable with Osterizer…

Ideal for use in soil, sediment and sludge sampling. Preassembled with .015" PTFE or F217 lined closed top white polypropylene closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Purchasing assembled sampling containers reduces the chance of contamination. These wide mouth jars are used for creams, pastes and solids. The contents can be easily removed from the straight sided jar. The F-217 foam lined caps seal with the least oxygen transfer.

Highly non-sticky PTFE jars. These jars are used whenever small quantity of samples need to be grinded/milled without contamination. Each jar set includes grinding jar, lid, silicon sealing gasket and a mixed size agate grinding balls. Lead tim

These wide-mouth flint glass jars come with phenolic lids. They are available in multiple capacities. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including arsenic, which are known to the State of California to cause cancer, birth defects, or other reproductive…

Superior chemical resistance Straight-sided, with linerless, threaded screw cap. Thick, heavy-duty construction. Autoclavable with wide temperature range of -270°C to 250°C. Walls are translucent with ribs on four sides. Knurled cap has molded inner ring which seals against mouth of jar.…

Closures available with additional lining materials. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment.

Flint glass, with slight shoulder Tight fitting, lower-density polyethylene cap with thumb tab can be removed and applied easily with the same hand in which the jar is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays which can be pulled out as drawers.…

Designed for collecting soil, sludge, waste and water samples for a variety of organic and inorganic target analytes where light protection is required. Thermo Scientific™ Wide-Mouth Amber Glass Packers are available Certified to meet EPA performance-based specifications for semi-volatile…

Crystal clear storage for dry or liquid products. Jars withstand extreme temperatures of 0° to 930°F Wide mouth for easy pouring and filling Plastic lids for general purpose use FDA compliant Caps included

All containers are supplied with Teflon®-lined closures Some products may require additional lead times Prepared to Procedure 1

Tall, wide mouth amber Type III glass closed-top jar is suitable for multiple uses. Amber is recommended for UV light sensitive samples. PTFE liner is friction fit in place to the polypropylene closure and easy to replace if necessary. Meets the EPA’s Performance Based Specifications for…

Ideal for use in soil, sediment and sludge sampling. Preassembled with .015" PTFE or F217 lined closed top white polypropylene closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Fix, protect, and transport your slides all-in-one. Slide-Fix™ Slide Jars are used in a variety of applications including preservation and transport of Pap smear slides, post-surgical tissues and fine needle aspiration (FNA) biopsies. Prefilled jars contain about 25 mL of 95% ethyl…

Polycarbonate Jars are transparent, as well as temperature and impact resistant. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents.

Nalge 5300 jars with covers Completely transparent, multipurpose containers with high-impact strength Excellent for use as water baths, aquaria, terraria or freeze-drying chambers Autoclavable Usable at temperatures up to +135°C Walls are 3 mm thick; can be…

QEC’s wide mouth straight-sided jars are excellent for sampling of soil, sediment and sludge. Level Three 4 oz. and 2 oz. jars are also tested and certified for volatiles. All are shipped assembled with PTFE-lined polypropylene caps. Preparation Levels for products on this page: …

This polypropylene jar improves on the classic tapered square design with a larger opening for easier placement and removal of slides. The polypropylene screw cap is 5.3cm in diameter, has a flat top, easy grip knurled edge, deep thread and a seal ring to prevent leaks. Five internal slots…

These 2.8L PYREX® jars are recommended for use as animal jars or for other purposes where resistance to hot air and steam sterilization is of importance. These jars are blown with walls approximately 4.5mm (3/16") thick The open ends are finished with a fire-polished bead to…

Preassembled with ultrasonically welded PTFE/Silicione-liner. Available in standard, precleaned, or precleaned/certified in accordance with recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned)…

Preassembled with ultrasonically welded PTFE/Silicione-liner. Available in standard, precleaned, or precleaned/certified in accordance with recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned)…

Purchasing assembled jars reduces sample contamination and streamlines ordering and inventory needs. The amber color protects light sensitive materials. The PTFE lined cap is inert making it a great option for use with strong acids and corrosive materials. The F-217 Foam liners seal with the…

Wide-mouth design for efficient addition and removal of contents Clear glass allows for easy viewing of contents Type III soda-lime glass Choose from Convenience Packs and Bulk Packs in a variety of cap / liner combinations. All 32 ounce jars in this group are packed in…

HDPE wide mouth jars are suitable for soil, sediment and sludge sampling. I-CHEM Certified® to meet the EPA’s Performance Based Specifications for Metals analysis.

Natural Polypropylene Jars are translucent and durable. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents. Polypropylene offers greater tolerance to high temperatures than HDPE and better contact clarity. …

Lid closely fits on shoulder but is not ground airtight Dimensions shown below are height, exclusive of lid x diameter Lid adds approximately 1 1/2” to height

Bottles come bulk packed in shrink wrapped with caps in bags Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Two capacities: 2 and 4 ounces Choice of five liner styles Type III soda-lime glass Narrow mouth design

Highly shock resistant polypropylene, heavy-walled Mason Jars are ideal for industrial waste sampling, long term storage and a variety of laboratory uses. Standard 70mm, G-threaded necks, and screw caps with unique grip lugs and removable leakproof silicone rubber ring seal Cap and…

Short, wide mouth clear Type III glass closed-top jar is suitable for soil sampling. PTFE liner is friction fit in place to the polypropylene closure and easy to replace if necessary.  Meets the EPA’s Performance Based Specifications for Volatile Organic Analysis.