Chambers

Compare Tool

Select up to 3 products

1 - 32 of 86
Sort
View
Show
  • Controller Information: Proportional integral derivative (PID) controller with LCD display Programmable ramp and soak Process phase graphic animations USB data port RS-485 communication (MODBUS-RTU) Real time clock Battery backup Event logs: 100 Visual alarm…

  • Perfect environmental simulation in the humidity chamber This climate chamber offers the full range of comfort, reliability and safety. Thanks to active humidity control from 20 % to 95 % rh and unsurpassed homogeneity of temperature and humidity over the entire interior, it is ideally suited…

  • Acrylic Vacuum Chambers

    Sapphire Cleanrooms

    Sapphire Vacuum Chambers are designed for vacuum testing, degassing small parts, defoaming, mixed liquids, biological tests and storing samples under sustained low and intermediate vacuums. Removable cover Front hinged door Vacuum gasket on door ensures airtight seal Supports vacuum…

  • Microprocessor control automates cyanoacrylate (CA) fuming of evidence Large 19 cubic foot chamber with 58.6" diagonal length - holds up to 15 long guns Programmable operating system for precise parameters and repeatable programs Fuming to 424° F with built-in humidifier and…

  • Access port with silicone plug - 10 mm, back

  • The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70°C and 180°C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end…

  • A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.…

  • The BINDER KMF ensures absolutely constant test conditions throughout the testing area. A big advantage of this humidity test chamber is its low space requirement and flexibility in terms of water supply. The wide temperature and humidity range make this humidity test chamber ideally suited for…

  • The new Solid.Line KBF-S climate chamber is a custom-made solution for long-term testing and accelerated stability testing for pharmaceutical products in accordance with the ICH Q1A guideline. The corrosion-free and condensation-free interior also ensures exceptionally stable temperature and…

  • The KBW series climate chamber with illumination achieves homogeneous light distribution and ensures consistent temperature conditions with its natural illumination. Temperature range: 0°C to 70°C Temperature range with light: 5°C to 60°C Positionable illumination…

  • Memmert Constant Climate Chamber (HPPeco) - this programmable model is the 115 volt, Peltier-technology seamlessly heats and cools, with TwinDISPLAY digital controller. HPPeco humidity range is 10 to 85% rh without light (upto 90% with light). Each individual appliance is tested according to the…

  •  Included are: drying train system for moisture reduction, programmable catalyst heater unit, ambidextrous Hypalon material gloves, touch screen controls, oxygen analyzer, transfer chamber, outlet strip 2-year warranty

  • The special advantage of the KBF LQC series: the patented photometry for photostability testing. Two spherical 3D ball-type sensors capture visible light intensity and UV light intensity – if the desired light dosage is achieved, it switches off automatically. Temperature range:…

  • Wall-Mounted Plastic Passthroughs

    Sapphire Cleanrooms

    Sapphire passthroughs enhance cleanliness by eliminating unnecessary personnel entry. These chambers make it easy and convenient to pass items in and out of a clean room without contaminating the controlled environment and are available in several standard sizes. Each features dual…

  • The BINDER MK series chamber is suitable for all heat and cold tests between -40°C and 180°C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests. Temperature range: -40°C to 180°C APT.line™ preheating chamber technology …

  • 9020-0370 / 20A00M957  3.6 cu.ft, 230 V1~ 50/60 Hz 9020-0371 / 20A00M958  3.6 cu.ft, 240 V1~ 50/60 Hz 9020-0372 / 20A00M959 36.0 cu.ft, 230 V1~ 50/60 Hz 9020-0373 / 20A00M960 36.0 cu.ft, 240 V1~ 50/60 Hz

  • Temperature Test Chamber

    Nor-Lake Scientific

    One swing glass door, self-closing, right hinged, not reversible Three, 304 stainless steel sliding tray shelves Controller Information: Proportional integral derivative (PID) controller with graphic display Programmable ramp and soak Process phase graphic animations …

  • The KBWF series shines with its homogeneous light distribution with natural illumination from above. It creates consistent climate conditions – even with illumination. Temperature range: 0°C to 70°C Temperature range with light: 10°C to 60°C Humidity range: 10 %…

  • Sapphire passthroughs enhance cleanliness by eliminating unnecessary personnel entry. These chambers make it easy and convenient to pass items in and out of a clean room without contaminating the controlled environment and are available in several standard sizes. Each features dual…

  • Access port with silicone plug - 10 mm, right

  • Temperature range: room temperature plus 5°C to 300°C APT.line™ preheating chamber technology Adjustable fan speed Program-controlled ventilation flap Color LCD controller with time-segment programming 2 chrome-plated racks Class 2 independent adjustable temperature…

  • The KBF P, equipped with ICH-compliant illumination, is the expert for photostability testing and provides clear and meaningful test results according to ICH guideline Q1B, Option 2. At the same time, the variable position illumination cassettes with BINDER Q1B Synergy™ Light ensure…

  • Temperature ranges between -70°C and 180°C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests. …

  • Viewing window and interior lighting - 230 V option model, viewing window in each door, 350 x 240 mm, and 30 W interior lighting

  • Rack accessories - fasteners (1 set of 4) for additional security of racks

  • Beta-Guard Workstation

    IBI Scientific

    This tabletop workstation has angled front sides and (2) access doors to work inside the chamber. The outside dimensions of this workstation are 28.5" x 20.625" x 20.75", and it is constructed of heavy-duty 1/2" clear cast acrylic for years of dependable usage. Each access door also has its…

  • SecureDry evidence drying cabinets are designed to provide a secure and dedicated area for drying wet evidentiary items while creating a barrier to keep out the potential threat of cross contamination. The cabinet utilizes pre-filtration, HEPA and carbon filtration to minimize the potential for…

  • Temperature measurement 27 measuring points - including certificate, 27 measuring points at specified temperature - for ED, FE, FED, FP, M, FDL, MDL, MK, MKT, BD, BF, KB, BFD, BFED, C, CB, KBW Series

  • The products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance. Temperature range:…

  • Sapphire passthroughs enhance cleanliness by eliminating unnecessary personnel entry. These chambers make it easy and convenient to pass items in and out of a clean room without contaminating the controlled environment and are available in several standard sizes. Each features dual…

  • Metal Vacuum Chambers

    Sapphire Cleanrooms

    Sapphire Vacuum Chambers are designed for vacuum testing, degassing small parts, defoaming, mixed liquids, biological tests and storing samples under sustained low and intermediate vacuums. Removable cover Front hinged door Vacuum gasket on door ensures airtight seal Supports vacuum…

  • Sapphire passthroughs enhance cleanliness by eliminating unnecessary personnel entry. These chambers make it easy and convenient to pass items in and out of a clean room without contaminating the controlled environment and are available in several standard sizes. Each features dual…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.