Static Eliminators

Compare Tool

Select up to 3 products

HomeAll Products

Static Eliminators

1 - 32 of 82
Sort
View
Show
  • 980-F Ionizer Air Filter

    SCS (A Division of DESCO Industries)

    Replacement air filters for use with TM980 ionized air gun.

  • ION-100A Ionizer optimizes the accuracy of results when weighing extremely finite samples by mitigating static charges that can lead to inaccuracies. ION-100A eliminates static electricity on plastic and glass weighing vessels which are particularly prone to attracting static charges. The ION-100A…

  • The Classic Coil Cord series' 2.5mm polyurethane coil insulation offers excellent coil memory. A clas-sic snap comes in three different sizes: 4mm; 7mm; 10mm so it works in combination with most standard wristbands. A swivel type banana jack increases coil life and prevents cord tangles. Comes…

  • Anti-Static Ionizer

    Accuris Instruments

    Static charge can accumulate on many types of samples as well as weighing containers, affecting mass determination on an analytical balance. The Accuris Anti Static Ionizer produces and emits negatively and positively charged ions that will nuetralize static electricity on samples and containers. A…

  • The Alphaboost™ Static Control System (ABS) is the first aftermarket product used outside of the balance chamber that provides ionization (static elimination) to the entire draft sheild enclosure. ABS is ideal for use in critical weighing applications where precise measurements (in the…

  • 12 Foot (24 Inches Of Coils) Coil Cord Used with a wristband to create a path-to-ground for an operator with resistance Strain Relief Tests Over 1 Million Cycles; 62 Times The Minimum Requirement Per ESD S1.1 Eliminates intermittent failures that occur with less durable cords and extends the…

  • The 3M Ionized Air Gun 980 Is An Excellent Tool For Blowing Particulate Contamination Off Of Any Surface. It Releases A Balanced Stream Of Compressed Ionized Air That Neutralizes The Static Charge That Can Hold Particulates To A Surface.

  • All products are made with Conductive Polypropylene handle and ESD Bristle. All conductive products were tested and proved to meet the following standards: ESD TR53-01-06 Compliance verification of ESD protective equipment and materials, ESD association (USA) ASTMD-257-78:…

  • 3M 2360 Dual Wire 5 Ft Coil Cord with 3.0mm Straight Plug

    SCS (A Division of DESCO Industries)

  • Models 6211 and 6212 electrical ionizing blowers utilize NRD's auto­-balanclng technology, making them suitable for semiconductor back-end, printed circuit board assembly, and general electronics applications. Neither model requires periodic calbration to maintain its low offset…

  • Wrist Band Extra wide, soft elastic band Increased wearer comfort. Has silver impregnated polypropylene knitted on inside for superior conductivity Reliably removes generated static charges. Additionally, silver fibers are antibacterial to help keep the band and operator clean. …

  • Patented revolutionary magnetic interconnect technology (U.S. Patent 5,004,425) Creates magnetic connection between wristband and coil cord; meets ESD S1.1, including disengagement force test (1-5 lbs) Dual-wire wrist strap provides redundancy If one dual wire wrist strap condutor is…

  • The 4500 series ESD control mats from Transforming Technologies are made of a durable 2-ply rubber. A conductive layer backs the static dissipative top layer that creates outstanding electrical performance char-acteristics. The 4500 series offers excellent resistance to hot solders, soldering irons…

  • 3M 8200 Dissipative 3-layer Vinyl Table Mat, 3x50, Blue

    SCS (A Division of DESCO Industries)

  • 3040 15 FT Ground Cord with 10mm Snap and Ring terminal

    SCS (A Division of DESCO Industries)

  • ESD workstation kits provide a ESD safe work surface and grounding supplies for handling static sensitive products. The kit includes a 16 x 24" ESD rubber mat which has a dissipative top layer and a conductive bottom layer. The mat is grounded with a low profile common point ground…

  • 8200 Dissipative 3-layer Vinyl Table Mat, 2x24, Blue

    SCS (A Division of DESCO Industries)

  • Patented (US patents 6,052,053 and 6,205,408) Dual Wire Wrist Strap provides redundancy Even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire Use with resistive loop technology continuous monitor Continuously verifies the proper…

  • The 4500 series ESD control mats from Transforming Technologies are made of a durable 2-ply rubber. A conductive layer backs the static dissipative top layer that creates outstanding electrical performance char-acteristics. The 4500 series offers excellent resistance to hot solders, soldering irons…

  • Static Eliminator Duostat For neutralization of static charge on balances, optics, films, etc. Strength 500 µCi; effective range approximately 40 mm No state or USNRC-specific license is required to purchase or possess this unit. Effective life span is one year. Spent unit…

  • The 1600 series 360å¡ curved wrist band and coil cord set features hypoallergenic silver-plated nylon thread for conductivity. The band is standard with a 4, 7 or 10mm male snap or a 4mm machined post. The CC0037's 2.5mm polyurethane coil insulation offers excellent coil memory. A swivel type…

  • Non-Marking Cup Style Heel Grounder

    Transforming Technologies

  • 6 Foot (12 Inches Of Coils) Coil Cord Used with a wristband to create a path-to-ground for an operator with resistance Strain Relief Tests Over 1 Million Cycles; 62 Times The Minimum Requirement Per ESD S1.1 Eliminates intermittent failures that occur with less durable cords and extends the…

  • Heel grounding devices provide protection for staff on the move. The HG1341 is constructed from durable materials and features a classic hook & loop closure. These heel grounders connect the person wearing them to ground via a proper floor mat or flooring material. Wearing the conductive ribbon…

Compare Tool

Select up to 3 products