Water For Injection
-
Distilled Water
RPI (Research Products International)Laboratory reagent grade. Purified by steam distillation for use as a research laboratory reagent. Not intended or sold for human consumption. 10 Liter size supplied in a Cubitainer with pouring spout.
-
-
General Molecular Biology Grade Water
Boston BioProductsComponents: Water(100%) Method: Distilled and steam sterilized at 121°C/15 psi for 60 minutes. Storage: Room Temp.
-
Water, Reagent Grade
Reagents®Boiling Point: 100°C CAS Number: 7732-18-5 Certification: ASTM D1193-06 Type I Chemical Formula: H2O Color: Colorless liquid Composition: Water 100% DOT: NOT REGULATED. Density: 1 Grade: Reagent Melting Point: 0°C Molecular Weight: 18.02 g/mol Physical State: Liquid …
-
Pure Life Distilled Water, 1 gallon
ReadyRefresh by Bluetriton BrandsPure Life Brand Distilled Water begins with municipal water that is purified. First, the water is passed through an activated carbon filter to remove any volatile organic chemicals, chlorine or any of the potentially harmful byproducts of chlorine, such as trihalomethanes. Then, ion exchange…
-
Riedel-de Haen Water solution CHROMASOLV™, contains 0.1 % (v/v) formic acid
Honeywell Research ChemicalsDensity (g/cm3): 1.14 Molecular formula: H2O
-
Water, Deionized, ASTM Type II
chemForce® (powered by Thomas Scientific)Meets ASTM Type II specifications for distilled water. Suitable for most laboratory applications.
-
Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000g/mLat 3.98°C(lit.) Application: For use in the preparation of cell culture media, and cell suspension and washing solutions. General description: This product is a very low…
-
Water, DI, Type I, 18 meg ohm Resistance, 5 Gallons Plastic Cubitainer inside…
Medical Chemical Corporation -
Molecular Biology Grade Water
RPI (Research Products International)Certified RNase and DNase free for use in molecular biology applications. Ideal for making reagents, rinsing glass and plastic ware, enzymatic reactions and more. Toxic agents such as DEPC are not used in purification procedures. Endotoxin Free RNase Free DNase Free *Tested to…
-
Water, USP Purified, Sterile Filtered, WFI Quality
Ricca ChemicalOur Water, USP Purified Sterile Filtered (Water for Injection Quality) is expertly purified by reverse osmosis and sterile filtration. No antimicrobial agents or other substances have been added to this water. Suitable for a wide range of pharmaceutical, bioprocessing, medical device…
-
Riedel-de Haen Water LC-MS CHROMASOLV™
Honeywell Research ChemicalsProduct Brand: Chromasolv Density (g/cm3): 1 Molecular weight: 18.02 Molecular formula: H2O
-
Water
Reagents®Boiling Point: 100°C CAS Number: 7732-18-5 Chemical Formula: H2O Color: Colorless liquid Composition: Deionized Water 100% DOT: NOT REGULATED. Density: 1 Grade: MDA, APHA, EPA, AOAC Melting Point: 0°C Molecular Weight: 18.02 g/mol Physical State: Liquid Refractive Index:…
-
VAI WFI Quality Water
Veltek AssociatesVAI WFI Quality Water is bulk manufactured high quality grade of water for use during disinfectant preparation. VAI’s VAI WFI Quality Water is produced from our validated 6 effect distilled WFI water system that is routinely monitored and passes all of
-
Water, USP/EP/JP Purified
Ricca ChemicalSterile, Molecular Biology, LC/MS, HPLC, ACS Reagent Grade, as well as ASTM Type I, II, III, IV, and USP, EP, and JP Purified Water available. Several packaging sizes available.
-
Riedel-de Haen™ CHROMASOLV™ Water, for HPLC
Honeywell Research ChemicalsCAS Number: 7732-18-5 Molar Mass: 18.02 g/mol Beilstein Registry Number: 2050024 EC Number: 231-791-2 MDL Number: MFCD00011332
-
Water, HPLC
BeanTown ChemicalCAS: 7732-18-5 EC No: 231-791-2 MDL No: MFCD00011332 Liquid Molecular Formula: H2O MW: 18.02 Melting Point: 0° Boiling Point: 100° Density (g/mL): 1 Refractive Index: 1.333
-
Water, BAKER ANALYZED LC/MS Reagent
Avantor - J.T.Baker®For Use in Liquid Chromatography and Mass Spectrometry Formula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5 Specific Gravity: 1L = 1.00 Kg
-
STERI-WATER, Veltek, Sterile Water USP-WFI Grade
Veltek AssociatesVAI manufactures a USP grade purified water that is processsed to compley with the standards required by the pharmaceutical, biotechnology, medical device, and healthcare industries.
-
Buffered Peptone Water, Granulated
MilliporeSigmaBuffered Peptone Water is rich in nutrients and produces high resuscitation rates for sub lethally injured bacteria and intense growth. The phosphate buffer system prevents bacterial damage caused by changes in the pH of the medium. Peptone including enzymatic digest of casein acts as a source of…
-
Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000g/mLat 3.98°C(lit.) Application: For use in embryo manipulation. Other Notes: Easily compare specifications for water products with the water specification table .
-
GemPure™ Plus Water for Injection (WFI) Quality Water (USP/EP/JP Grade) GemPure™ Plus Water for Injection (WFI) Quality Water (USP/EP/JP Grade) optimizes your upstream and downstream bioprocess workflows and productivity from development to commercial production and meets specifications…
-
Water, ULTREX II Ultrapure Reagent
Avantor - J.T.Baker®Formula: H2O Formula Weight: 18 CAS Number: 7732-18-5 Specific Gravity: 1L = 1.00 Kg
-
Water, with 0.1% Trifluoroacetic Acid, LC-MS Eluent
GFS ChemicalsHigh purity solution for use in liquid chromatography applications.
-
Water, Deionized, ASTM Type I, ACS Grade
chemForce® (powered by Thomas Scientific)Meets ASTM Type I specifications. Meets ACS specifications for reagent water. Suitable for most laboratory applications.
-
Riedel-de Haen Water with 0.1% formic acid LC-MS Ultra CHROMASOLV™, tested for…
Honeywell Research ChemicalsProduct Brand: LabReady Density (g/cm3): 1.14 Molecular weight: 18.02 Molecular formula: H2O
-
Water, HPLC Grade
Spectrum ChemicalCAS Number: 7732-18-5 Molecular Formula: H2O Molecular Weight: 18.02 WATER, HPLC GRADE, is used in most HPLC mobile phases and in sample preparation. Because it dissolves most substances and is nontoxic, it is known as a Universal Solvent. To be used for HPLC analysis, it must…
-
Riedel-de Haen Water CHROMASOLV® for pesticide residue analysis
Honeywell Research ChemicalsChemical name: Water Product Brand: Chromasolv Density (g/cm3): 0.998 Molecular weight: 18.02 Molecular formula: H2O Chemical purity: =99% UN Number:
-
"Water, for ion chromatography"
MilliporeSigmaFormula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000 g/mL at 3.98 °C(lit.)
-
hypergrade for LC-MS LiChrosolv(R) Legal Information: LICHROSOLV is a registered trademark of Merck KGaA, Darmstadt, Germany
-
GemPure™ Cell and Molecular Grade Water
GeminiBioGemPure™ Cell and Molecular Grade Water GeminiBio’s Cell and Molecular Grade Water is manufactured specifically for your most stringent research applications. GemPure™ Cell and Molecular Grade Water is sterile and low endotoxin for your cell culture processes. Protease and…