Our beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.

KIMAX® Low Form Griffin glass beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal shock. They have been a staple in research laboratories for many generations. Thick, slightly flared, beaded top, with a spout…

Nalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…

Seamless stainless steel construction With turned rim and parallel sides Without spout Stainless steel lids offered separately Beaker dimensions are listed in inches by H x O.D. x I.D.

These tri-pour plastic beakers range from 50mL to 1000mL. They are unbreakable and can be used with commonly used acids, solvents and alkalis. The laboratory beakers can be autoclaved and are reusable, yet are inexpensive enough to be disposable. All six sizes are graduated in mL. Clarified…

Thick uniform walls throughout Extra wall thickness built into evenly tooled top rim Prolonged life expectancy Not recommended for use on hot plates where significant thermal gradients exist Durable matte finish marking area with white graduated scale KIMAX beaker with thick…

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…

Disposable, translucent polystyrene, resistant to diluted or weak acids, alcohols and bases Usable to 200°F, with four-way pour spouts Smaller sizes suitable for use as sampling cup for atomic absorption units, flame photometers and blood cell counters. Graduations on 150 mL and larger,…

Measures feature convenient handle and graduations in milliliters and ounces on inside of cup.

Borosil® Low-Form Griffin Beakers are designed with pouring spouts for precise pouring. Uniform wall thickness & stress-free glass make them ideal for heating or cooling. High chemical resistance means Borosil® Beakers can be used in nearly any application. Avail. in sizes from…

Corning 1010 Handle attached by an adjustable, stainless steel strap which fits securely into a shallow groove molded in upper part of beaker Beaker (1530K40) fitted with molded glass handle which facilitates pouring. Replacement beaker (1530K50) supplied without handle or strap.

Designed from ASTM E 960 Type III 100 mL size graduated in 10 mL intervals; 200, 300 and 400 mL sizes in 25 mL intervals; 500, 600 and 1,000 mL sizes in 50 mL intervals.

Unique combination of a pure Polytetrafluoroethylene body with a specially formulated stabilized Polytetrafluoroethylene Carbon base as a single molding. Totally inert pure polytetrafluoroethylene inner surface Heatable to 270°C without distortion Improved heat transfer Use…

Beakers are made from 316L stainless steel and available in capacities of 1, 2, 3, and 5 liters. Beakers have solid bar sanitary handle, easy-pouring beaker-spout, and graduation marks. All beakers have a seamless sanitary interior and standard 10 Ra finish. Features: Beakers have solid…

Polypropylene Molded graduations - in liters Low form for added stability Autoclavable; use up to 135°C Autoclavable, highly translucent especially when filled with liquids. Permanent molded in graduations. Resistant. No drip spout. Thumb grip on handle.

Beakers offer ±5% accuracy All beakers are transparent for clear content visibility and graduated for easily estimating volumes Molded-in pouring spout and rolled-lip creates a dripless working environment Beakers are constructed of polypropylene and are resistant to most commonly used…

Plastic, with glass-like clarity, strong and impact-resistant Low form with spout Autoclavable Usable continuously to 150°C, intermittently to 175°C Excellent chemical resistance, although attacked by powerful oxidizing agents and affected by prolonged exposure to hydrocarbons, ethers, etc.…

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…

Seamless stainless steel construction with pour spout Pour spout allows for easy transfer of liquids Capacity full-mark near top of beaker assures accurate measuring Dimensions are listed in O.D. x Height

Our beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have a double graduated metric scale and a marking area. Tolerance for beakers is approximately +/- 5%.

An ideal starter set for any laboratory, this set contains 5 borosilicate glass beakers in sizes 50ml, 100ml, 250ml, 600ml, and 1000ml. 

This 400ml borosilicate glass beaker features an attached handle and a smooth rim. The molecular structure of caffeine is enamled in white on one side, and the other side has standard beaker graduations.

Transluscent polypropylene beakers printed with blue graduations.

Beaker, PP, 500mL, Tapered Sides, Print Graduations

Jazz up your lab with brightly colored beakers Choose KIMAX® Low Form Griffin "Colorware" glass beakers for ease of identification in the lab. These beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal…

Chemically resistant Autoclavable Less rigid than reusable type Liquid level can be easily seen through translucent wall Low form beakers have spout and ribs on rim Size 15 mL graduated in 5 mL and 18 oz. intervals; sizes 30 and 50 mL in 5 mL and 14 oz.; sizes 100 and 150 mL in 5 mL and 12…

Tri-Pour Beakers have a pour spout on three sides with easy-to-read graduations on the outside of each beaker Polypropylene Graduated: 10 to 50 ml in 10 ml increments and .5 to 1.5 oz in .5 oz increments.

A tall beaker with spout to facilitate pouring. For convenience, these beakers are graduated to indicate their approximate content.

Seamless construction allows for safe transfer to liquids. Capacity full mark near top of beaker assures accurate measuring. Griffin style beaker 3000 mL capacity

Sterilizable Chemically unreactive Rim can be squeezed to form pouring spout Reusable but economically priced for one-time use Resistant to temperatures up to 121°C (250°F). Resistant to most solvents, acids, alkalies, salts, organics and biologicals. Cups are available…

Chemical resistant Teflon® PFA Rigid, injected molded walls Temperature range: -270°C to 250°C Autoclavable

Borosil® Tall-Form Griffin Beakers are designed with pouring spouts for precise pouring. Uniform wall thickness & stress-free glass make them ideal for heating or cooling. High chemical resistance means Borosil® Beakers can be used in nearly any application. Avail. in sizes from…