For liquids lighter than water Models 6025F10 through F20 are for testing small quantities Models 6025C10 through C25 require a cylinder 340 x 38 mm diameter and approximately 250 mL of liquid for submersion. Models 6025F10 through F20 require a cylinder 150 mm deep x 25 mm i.d. and…

Hydrometers are used to determine the specific gravity of a liquid. Consists of a long glass tube containing a ballast at the base of the float bulb and graduations on the stem. The ballast is made from steel pellets free from lead and mercury. The Baume scale originally was used in industrial…

Thermco's offering of hydrometer include glass & plastic Hydrometers in the following scales.. Specific gravity baume and density hydrometers, ATSM & API Hydrometers, Alcohol Hydrometers, Brine Brix Hydrometers and Combined Form. Thermo-Hydrometers. Thermco's Hydrometers are…

The Thermco special application hydrometer is suitable for use in research facilities and general laboratories while conducting wide range of experiments. It features 0 to 100% Tralle and 0 to 200% proof range with 1% divisions. Proof scale measures the percent alcohol by volume multiplied by 2 …

For testing small quantities of liquids heavier than water Approximate total length 150 mm, approximate length of graduated scale 45 mm; interval 0.005 Tolerance ±2 scale divisions Requires a cylinder 150 mm deep x 25 mm i.d. and approximately 50 mL of liquid.

Made from optical quality polycarbonate material, these plain form hydrometers are perfect for field work where breakage could be a concern. Used for measuring sodium chloride saturation of salt brines in industries including food, fishing, and transportation, they are available in models to…

These plain form hydrometers are available in a variety of models measuring specific gravity / relative density (g/cm?) of liquids lighter and heavier than water in various ranges from 0.690 to 3.000. Commonly used in industries such as food and beverage, chemical, pharmacology,…

These plain form hydrometers are available in a variety of models measuring the relative densities (specific gravity) of oil and petroleum products in various ranges from -1° to 101°API in accordance with the American Petroleum Institute (API) and the American Society of Testing Materials…

Liquids heavier than water Specific gravity plain form hydrometers cover a variety of ranges and are for liquids heavier than water. Plain form hydrometers measure 165mm (6.5”) length, have 0.005 divisions and temperature of standardization is 60°F/60°F. 1234K71 has a…

Used for measuring sodium chloride saturation of salt brines in various industries including food, fishing, and transportation. Choose from two plain form models with ranges from 0 to 100% or 0 to 26.5%. Lead free ballast and glass Individually serialized Temperature standardization:…

Degrees API @ 60°F Made from heavy-walled, annealed tubing for maximum strength Built-in, non-mercury thermometer Lead-free ballast Conforms to ASTM accuracy requirements Each thermo-hydrometer comes with a Certificate of Conformance traceable to NIST. Bio-degradable, non-mercury…

Thermco’s Plastic Hydrometers are fabricated from polycarbonate (PC) which makes the instrument shatter-proof, while offering glass-like clarity for ease of reading. All models are plain form, so a separate thermometer should be used to measure the temperature of the sample and correct for…

Conforms to the accuracy requirements of ASTM hydrometers; ASTM No. 5H Measures the relative densities (specific gravity) of oil and petroleum products in accordance with the API and ASTM E100 standards Individually serialized; lead free ballast and glass Length: 330mm…

Used to determine proof of ethyl alcohol spirits, these hydrometers are available in various ranges from 0 to 206%. 300mm (12) long Lead free ballast and glass Made according to the Bureau of Internal Revenue, U.S. Treasury Department, the tolerances listed for these hydrometers…

Measuring the percent by volume of isopropyl alcohol, these hydrometers are offered in two ranges, 0 to 50% or 50 to 100%. Lead free ballast and glass Individually serialized Temperature standardization: 20°C Hand inspected by our U.S. quality team Packaged with a…

Specific Gravity @ 60°F Made from heavy-walled, annealed tubing for maximum strength Built-in non-mercury thermometer Lead-free ballast Each thermo-hydrometer comes with a Certificate of Conformance traceable to NIST. Bio-degradable, non-mercury performance liquid…

Thermco's offering of hydrometer include glass & plastic Hydrometers in the following scales.. Specific gravity baume and density hydrometers, ATSM & API Hydrometers, Alcohol Hydrometers, Brine Brix Hydrometers and Combined Form. Thermo-Hydrometers. Thermco's Hydrometers are commonly found in the…

Brix for Sugar @ 20°C Made from heavy-walled, annealed tubing for maximum strength Built-in, non-mercury thermometer Lead-free ballast Conforms to ASTM accuracy requirements Each thermo-hydrometer comes with a Certificate of Conformance traceable to NIST. Bio-degradable, non-mercury…

Used to determine the specific gravity / relative density (g/cm?) of battery acid in the range of 1.150 to 1.300, this hydrometer comes with a siphon set to collect battery acid for an accurate reading. Rubber parts are made of nitrile, a synthetic rubber that is more chemical resistant and…

Available in a variety of models measuring Baume of syrups and other liquids heavier than water in various ranges from 0° to 70°, these plain form hydrometers are used in the chemistry, pharmacology, food and beverage, starch industries and more. 300mm (12”) long Lead free…

Hydrometers are used to determine the specific gravity of a liquid. Consists of a long glass tube containing a ballast at the base of the float bulb and graduations on the stem. The ballast is made from steel pellets free from lead and mercury. Specific Gravity – With over half of the…

Used to determine proof of ethyl alcohol spirits, these hydrometers are available in various ranges from 0 to 206%. 300mm (12”) long Lead free ballast and glass Made according to the Bureau of Internal Revenue, U.S. Treasury Department, the tolerances listed for these…

Hydrometers are used to determine the specific gravity of a liquid. Consists of a long glass tube containing a ballast at the base of the float bulb and graduations on the stem. The ballast is made from steel pellets free from lead and mercury. API ASTM – The American Petroleum Institute scale…

Baume Heavy @ 60°F Made from heavy-walled, annealed tubing for maximum strength Built-in non-mercury thermometer Lead-free ballast Conforms to ASTM accuracy requirements Each thermo-hydrometer comes with a Certificate of Conformance traceable to NIST. Bio-degradable,…

330mm Length 0.0005 Divisions

Thermco's offering of hydrometer include glass & plastic Hydrometers in the following scales.. Specific gravity baume and density hydrometers, ATSM & API Hydrometers, Alcohol Hydrometers, Brine Brix Hydrometers and Combined Form. Thermo-Hydrometers. Thermco's Hydrometers are commonly found in the…

For liquids heavier than water Tolerance ±1 scale division Requires a cylinder 300 x 38 mm and 300 mL of liquid.

Used to determine the specific gravity of soil in the range of 0.995 to 1.038, or -5 to 60 g/L (using a weight by volume scale), these hydrometers conform to the accuracy requirements of ASTM hydrometers. 280mm (11”) long Lead free ballast and glass Individually serialized …

Achieve perfect beer brewing and wine making results Three scales, Specific Gravity, Potential Alcohol by Volume (PAV), and Brix provide invaluable data points when crafting beer, wine, kombucha, mead, cider, and more in either a commercial or home brew setting. Monitor fermentation…

These combined form thermo-hydrometers offer the additional convenience of an enclosed thermometer with a temperature scale of 0/150°F, and measure specific gravity / relative density (g/cm 3 ) of a variety of liquids in various ranges from 0.600 to 2.000. Conform to the accuracy…

Thermco's Petroleum Gold brand hydrometers are a superior brand of high precision hydrometers calibrated to the highest standard that exceeds the exacting ASTM standards. Made from the finest materials available; the glass is free from imperfections, has the suitable thermal properties for the…

These plain form hydrometers are available in a variety of models measuring specific gravity / relative density (g/cm) of liquids lighter and heavier than water in various ranges from 0.820 to 1.420. Commonly used in industries such as food and beverage, chemical, pharmacology,…