Nalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…

Beakers offer ±5% accuracy All beakers are transparent for clear content visibility and graduated for easily estimating volumes Molded-in pouring spout and rolled-lip creates a dripless working environment Beakers are constructed of polypropylene and are resistant to most commonly used…

Corning 1010 Handle attached by an adjustable, stainless steel strap which fits securely into a shallow groove molded in upper part of beaker Beaker (1530K40) fitted with molded glass handle which facilitates pouring. Replacement beaker (1530K50) supplied without handle or strap.

Disposable graduated polypropylene construction Flat bottom for magnetic stirring (not for use on hot plates) Chemically resistant Autoclavable Constructed with sloping sides that allow nesting for storage Unique triangular flanged rim with notches forms three…

Extra heavy wall Low form Molded of FDA Approved high density polyethylene resin. These heavy walled graduated beakers are slightly tapered to allow nesting. Each beaker features two properly formed spouts which assist in pouring and preventing dripping.

These disposable, yet sturdy polypropylene beakers feature three pouring lips for drip-less dispensing. Beakers are graduated in both ounces and ml. Assortment of 5 each 50ml, 100ml, 250ml, 400ml, 800ml, and 100ml Tri-Pour Beakers.

Disposable, translucent polystyrene, resistant to diluted or weak acids, alcohols and bases Usable to 200°F, with four-way pour spouts Smaller sizes suitable for use as sampling cup for atomic absorption units, flame photometers and blood cell counters. Graduations on 150 mL and larger,…

Transluscent polypropylene beakers printed with blue graduations.

Sterilizable Chemically unreactive Rim can be squeezed to form pouring spout Reusable but economically priced for one-time use Resistant to temperatures up to 121°C (250°F). Resistant to most solvents, acids, alkalies, salts, organics and biologicals. Cups are available…

Seamless stainless steel construction with pour spout Pour spout allows for easy transfer of liquids Capacity full-mark near top of beaker assures accurate measuring Dimensions are listed in O.D. x Height

Heavy duty beakers are ideal for tough handling conditions including mechanized washing. Beakers feature a double graduated metric scale and a marking area. Tolerance is approximately ± 5%.

Polypropylene Molded graduations - in liters Low form for added stability Autoclavable; use up to 135°C Autoclavable, highly translucent especially when filled with liquids. Permanent molded in graduations. Resistant. No drip spout. Thumb grip on handle.

Jacketed beaker with one upper and one lower hose connection on opposite sides. Also available with Ace-Safe connections. All are without a pouring spout.

Plastic, with glass-like clarity, strong and impact-resistant Low form with spout Autoclavable Usable continuously to 150°C, intermittently to 175°C Excellent chemical resistance, although attacked by powerful oxidizing agents and affected by prolonged exposure to hydrocarbons, ethers, etc.…

Sample beaker, plastic (polypropylene, PP), 120 mL, Suitable for sample racks: 6.2041.470 6.2041.840 6.2041.850 6.2068.010 6.2068.020 6.2068.030 6.9920.141 250 pieces

Uniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…

Designed from ASTM E 960 Type III 100 mL size graduated in 10 mL intervals; 200, 300 and 400 mL sizes in 25 mL intervals; 500, 600 and 1,000 mL sizes in 50 mL intervals.

Our Berzelius (tall form) beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is…

Diamond® Essentials™ Griffin Style Beakers meet the demands for mixing, pouring, stirring, and measuring solutions in many laboratory operations. Available in economic polypropylene (PP) or crystal clear Polymethylpentene (PMP), these beakers are the safe, shatterproof alternative to…

An ideal starter set for any laboratory, this set contains 5 borosilicate glass beakers in sizes 50ml, 100ml, 250ml, 600ml, and 1000ml. 

Easy-to-clean seamless construction of non-corrosive 304 stainless steel The handy pour spout on the Beaker / Griffin styles provides easy transfer of liquids Flared edge makes pouring easier Measurements in inches / diameter x height. *Sterilizable products can withstand…

Tri-Pour Beakers have a pour spout on three sides with easy-to-read graduations on the outside of each beaker Polypropylene Graduated: 10 to 50 ml in 10 ml increments and .5 to 1.5 oz in .5 oz increments.

Beakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. Griffen style beakers next without sticking together.

Seamless stainless steel construction With turned rim and parallel sides Without spout Stainless steel lids offered separately Beaker dimensions are listed in inches by H x O.D. x I.D.

Beakers, molded in polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New Style beakers feature oversized, tapered spouts for easier pouring of solutions.

Translucent beakers are resistant to strong acids and bases, organic solvents, and commonly used laboratory reagents. Autoclavable beakers have excellent temperature resistance (250oF). The beakers are molded with a special "dripless" lip.

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…

Our beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.

This 400ml borosilicate glass beaker features an attached handle and a smooth rim. The molecular structure of caffeine is enamled in white on one side, and the other side has standard beaker graduations.

Manufactured in state-of-the-art molding facility using high purity virgin materials conforming to US FDA 21 CFR. TPX Polymethyl pentene (PMP) material is highly transparent as well as chemically resistant with a higher temperature tolerance than PP beakers. Tapered stacking style saves space and…

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…

Polypropylene construction Sizes range from 50 to 5000 mL Thomas Low-Form Griffin Beakers have easy-to-read screened graduations plus size code, resin code, maximum use temperature and "No flame" symbol. Ribs make stacking easy. Beakers meet ISO/DIS 7056 International…