Sample Preparation, Chromatography

Compare Tool

Select up to 3 products

HomeAll Products

Sample Preparation, Chromatography

1 - 32 of 135
Sort
View
Show
  • ALTEF Gas Sampling Bags

    Restek

    Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…

  • Ultra-High Pressure Sample Cylinders

    Restek

    Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…

  • Resprep 6-Port Disk Manifold Lid

    Restek

    Low-cost option for disk extraction; fits standard 3 3/4" x 7 1/2" glass vacuum chambers Doubles sample capacity—holds six disks, compared to standard 12-port manifolds, which only hold three Individual vacuum control for each port improves reproducibility Collection plate…

  • Cell Cleaning Brushes for ASE 100/200/300 Cells

    Restek

    Firm nylon bristle brushes for easy cell cleaning and removal of solid samples Range of sizes to fit all extraction cells for ASE 100, 200, and 300

  • Ashcroft Test Gauges

    Restek

    High-accuracy test gauges are recommended for verifying the vacuum/pressure in canisters before and after sampling. The 6-inch face on the analog gauge allows for easy reading. The digital gauge operates on two AAA batteries and offers an unambiguous readout. Both gauges have an accuracy of +/–…

  • Replacement Orifices

    Restek

    Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times.

  • Chemker Vacuum Pumps

    Restek

    PTFE wetted parts are highly resistant to corrosive gases Diaphragm-based pump is low maintenance and virtually pollution free Quiet, low-vibration units keep disturbances to a minimum Built-in thermal protector automatically shuts off pump if it overheats and then restarts it once the…

  • Replacement Fittings for Grab Sampling Kits

    Restek

    Includes fitting and orifice.

  • Aura Personal Air Samplers

    Restek

    Disposable 8-Hour Sampler Lines

  • Method Specific SPE Cartridges

    Restek

    These cartridges have been specifically designed to provide consistent and reproducible results for the method or application stated. All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be processed by any one or…

  • Resprep 12- or 24-Port SPE Manifolds

    Restek

    Use with any standard male luer end SPE cartridges Inert, PTFE sample guides reduce cross-contamination and carryover Flexible sample collection rack will accommodate a variety of receiving vessels Quick vacuum-release valve for better system control Individual valves allow vacuum…

  • Cell Organizer for ASE Parts

    Restek

    Convenient storage of extraction cell parts and consumables Thirteen open bins provide easy visibility and organization for small and large pieces Small footprint conserves valuable lab bench and drawer space

  • Valves for ASE 100/200/300 Systems

    Restek

    Fits ASE 100, 200, 300 systems Meets original equipment manufacturer's performance

  • Autoseal Tip Assembly for ASE 200/300 Systems

    Restek

    Meets original equipment manufacturer's performance Choose original equipment–equivalent stainless steel or Siltek deactivation for improved inertness and extended lifetime

  • PUF Glass Holders

    Restek

    Durable and reusable, PUF glass holders reduce waste and are a cost-effective alternative to precleaned packed cartridges. Fit either 6 cm or 22 mm OD PUF plug or can be used with bulk SDVB resin Large glass holder fitted with double stainless steel screens for support Small glass…

  • Extraction Cell Bodies for ASE Systems

    Restek

    Cell bodies are serialized for easy sample identification Smooth inner surfaces for easier cleaning Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 Method 3545, Pressurized Fluid Extraction…

  • Vacuum Gauges

    Restek

    High-quality vacuum gauges with 316 stainless steel wetted surfaces. –30" Hg to 0" Hg. Recommended for use with passive sampling kits. All are rear mount.

  • Miniature Air Sampling Kits

    Restek

    Restek’s passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* Kit includes flow controller, critical orifice, 2 µm frit filter, vacuum gauge, and sample inlet. The gauge and sample inlet are downsized for…

  • Tedlar Sampling Bags

    Restek

    Sampling bags are a low-cost, whole-air sampling device for high-level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…

  • Q-sep Bottle Top Solvent Dispenser

    Restek

    Accurately and precisely dispense liquids for QuEChERS extractions with this versatile pump. A quick, simple adjustment lets you set the output volume anywhere from 2.5 mL to 30 mL per stroke, and the included adaptors will accommodate most reagent bottles. Adjustment knob offers 56 output…

  • Calibration Thermal Desorption Tubes

    Restek

    High-quality thermal desorption tubes are suitable for ppt to ppm concentrations of volatile organic compounds (VOCs) in ambient, indoor, personal, and industrial hygiene environments. Fit Markes (ULTRA and UNITY), PerkinElmer, and Shimadzu thermal desorbers. Packed tubes come with a report…

  • Resprep Resin SPE Disks

    Restek

    47 mm glass fiber disks embedded with styrene/DVB resin For chlorinated, benzidine-containing, or nitrogen-containing pesticides Meet requirements of EPA Methods 515.2 and 553

  • Replacement Septum for Gas Sampling Bags

    Restek

    Replacement Septum for Tedlar, ALTEF, and Multi-Layer Bag Valves, 4mm diameter, PTFE-faced silicone.

  • Resprep SPE Tube Parts & Accessories

    Restek

  • Diskcover-47 Extraction Disk Holder

    Restek

    Compatible with most vacuum manifold systems that accept 1/8-inch male luer fittings Sample can be automatically introduced via 1/8-inch PTFE tubing or from the optional Diskcover-47 reservoir

  • Raw Polyurethane Foam (PUF) Plugs

    Restek

    Unwashed PUF plugs for both low-volume and high-volume sampling Flame retardant free—making them easier to clean for trace analysis Compliant with EPA and ASTM methods—0.022 g/cm 3 density Glass holders sold separately

  • Rupture Disk Tee

    Restek

    Unlike other designs, Alta-Robbins rupture disk tee is NOT permanently soldered to the disk, making the disks replaceable. Disks are easily changed without removing the valve or tee from the cylinder. These tees are designed to be installed into existing systems to provide reliable overpressure protection.

  • Replacement RAVE Diaphragm Valves

    Restek

    Proven long life—durable design is engineered to exceed 15,000 cycles Leak-free performance—every valve is helium leak-tested to 1x10 -6 mL/sec Effortless operation—easily finger-turn to achieve full valve closure (only 10 in-lb) Enhanced damage-resistance—W-type…

  • Canister Air Sampling Timer

    Restek

    These timers are designed to simplify both automated and manual air sampling. The easy-to-use keypad and graphic display facilitate the programming of up to 12 timed events. They offer the convenience of remote start/stop sampling and permit intermittent sampling throughout a test period. The LCD…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.