Air Sampler

The MD8 series of air samplers are monitoring devices combined with novel filtration systems for the exceptional recovery of airborne microorganisms. MD8 AirScan: (Integrated) Quantitative detection in sterile areas such as clean rooms/RABS, isolators, or blow-fill-seal machines. AirPort…

Disposable 8-Hour Sampler Lines

New personal air sampling technology designed to meet OSHA and NIOSH requirements for industrial hygiene applications Quiet, robust sampler does not require a pump and manages variations in face velocity, temperature, and humidity better than traditional sampling approaches Easy to…

…These air samplers are available for a wide range of chemical classes, so the choice of sampling material can be tailored to specific applications. Ideal for labs supporting environmental monitoring, industrial hygiene, and any other ambient (indoor/outdoor) air testing, radiello air samplers from…

…NT® microbial air monitoring systems are high performance, portable, battery operated instrument which are based on the principle of the Andersen air sampler. These compact yet sophisticated devices are the preferred choice for those demanding the highest quality in microbial air monitoring. A…

…for environmental air monitoring - including those set by: ISO 14698, EU GLP-GMP, EN45001, ACGIH, USP 1116, and USP 797 Fast sampling time - less than six minutes for SAS Super 180 high volume air sampler to sample 1,000 liters of air; ten minutes for SAS Super 100 SAS air sampler Low running…

…environments and for hard to reach places A 500 mL bottle screws into the end of the 6 foot handle and is filled via four ports (two allowing liquid to enter and two allowing air to escape) Excellent for industrial and environmental applications Handle is 6 foot length by 1-1/4” diameter

…polypropylene The E-Z Sampler® has a 39” (100cm) head/shaft assembly and is supplied with a 125mL borosilicate glass bottle with a PTFE lined cap Filling ports are located above the bottle to ensure that it is completely filled to reduce the possibility of air entrapment Bottle has a…

Perfect for fast and simple grab sampling of small air volumes (50–500mL) directly into sorbent tubes* Easy, instant sample collection with no complicated pumps to calibrate or maintain Convenient to use anywhere, just attach a sorbent tube to the end of the handheld unit and draw a…

…bag sampler provides fast sampling with zero cross-contamination. A vacuum created in the box draws air into the sampling bag without drawing it through the vacuum pump first, as is the case with standard air sampling pumps, thereby preventing contamination of the sample. This bag sampler can fill…

…portable field sampler were significantly lower than losses from stored whole water samples. The sampler can be reused 50-100 times, and is disposed of when the fiber is no longer usable.The portable field sampler also efficiently detects organic compounds in air. In our studies, the sampler allowed…

…PVF (Tedlar) film, a material that is inert to a wide range of chemicals. Tedlar is manufactured without plasticizers. Can be used for collecting air containing all common solvents and many other classes of chemicals. Bags with dual stainless steel fittings feature hose/valve and replaceable…

A high velocity impinger which passes 6L/min (corrected to engineering gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.035in capillary tip that is positioned 4mm above…

A high velocity impinger (Ref. AGI-4) which passes 12.3 to 12.6L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary…

These small canisters are designed for controlled sampling, such as personal air sampling, as an alternative to tube and pump samplers. The 1,000 cc canister is suitable for sampling volatile organic compounds in air according to methods TO-14A, TO-15, IP-1A, ASTM 5466, OSHA PV 2120, and NJ DEP Low…

Sweep elbow, available with one end threaded, the other end reduced for use with 7506 bushing or both ends threaded for use with either 7506 bushing or 5841 coupling.

Sampling tee with top threaded, side and bottom tubes reduced for use with 7506 bushing.

A high velocity impinger (Ref. AGI-30) which passes 12.0 to 13.0L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary…

Collection bottle, usually connected to the bottom arm of the 7495 tee with reduced ends, to collect heavy particulates before they enter the manifold train.

…adapter used for reducing air flow in the Air Sampling Manifold to prevent a pressure drop across the sampling ports. Normally installed in front of the 7511 blower, in line with the manifold. Positioning of holes in threaded nylon plug controls the volume of air flow. Plug supplied with O-Ring.

Straight tube type air sampling cane with polyethylene hood and stainless steel brackets. Codes -35 & -37 feature a #7 Ace-Thred port for introducing calibration gases.

Accessories for MD8 air sampling devices

…to use and portable; use almost anywhere to sample pollutants in ambient air or continuously monitor industrial emissions Quality construction made of low-outgassing materials; includes built-in fan that refreshes chamber air to ensure representative sampling Optional accessories let you power…

…500°C. These grades are recommended primarily used in environmental air monitoring applications. Grade GB100R filters have very low trace metal content of As, Pb, Cd. Used in high and low volume air samplers for aerosols and airborne dust and metal contaminants. Gas Collection…

Air sampling cane with funnel at one end to avoid water droplets from collecting at edge and being sucked into manifold train. Bulge above the funnel is for glass wool or similar material to allow for filtering of particulates. Codes -22 & -26 feature a #7 Ace-Thred port for introducing calibration…

…and models with depth capture available  upon request . Drum Sampler 6' 100 mL ( 1212X49 ) Product Dimensions (l x w x h) : 0x1.905x78.062in 6' Handle Drum Sampler. Similar to our Liquid Sampler, but specifically designed for easy, effective sampling of 55 gallon drums…

…sampler. Assembled sampler includes: Stainless steel tee with orifice Variety of orifice sizes for sampling from 4 minutes to 10 hours 1-1/2" vacuum gauge (–30" Hg to 0" Hg) 2 µm frit filter for insertion into 1/4" compression sample inlet Air…

…split capacitor, steel housed blower used to pull air through our Air Sampling manifolds. Blower produces 50 cfm @ 0.0 meters of water static pressure which assures a minimum pressure drop across each port in the manifold train. Free air rpm is 3030. Available in both 115 & 230v models,…

Synonym: Air Sampling Pumps Feature: UL listed: No (Not EX rated) Compatibility: for use with Single 1-2 Liter Bags

Tryptic Soy Agar for determination of the total viable count. For use with RCS Microbial Air Samplers. Store at 2-25°C.

Rose Bengal Agar with streptomycin; for determination of yeasts and molds. For use with RCS Microbial Air Samplers. Store at 2-25°C.  

…environments. For use with RCS Microbial Air Samplers. Store at 2-25C. Synonyms: Agar Strips; TSA, Soybean Casein Digest, Agar Strips Application: Agar Strips are used for monitoring of ambient air and compressed gases with RCS® Air Samplers. These Agar strips are gamma irradiated and…