Furnaces

Compare Tool

Select up to 3 products

1 - 32 of 84
Sort
View
Show
  • Features: Available in two capacities Digital single setpoint temperature control to 1100°C Single display shows actual temperature or setpoint Ceramic fiber insulation permits faster heatup, reducing energy consumption Embedded heating element on top and both…

  • For operation up to 1100°C (1980°F) These models also serve as Ashing Furnaces Side hinge door keeps the furnace hot face away from the user Atmosphere vent allows for atmosphere removal, ventilation and air injection Safety interlock system disconnects the power to the…

  • These powerful laboratory muffle furnaces are available for temperatures up to 1400°C, 1500°C, or 1600°C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces to all-rounders in the laboratory. Heating times of 40 minutes to…

  • Robust design and choice of four temperature controllers, ideal for industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis. Spacious 14L (0.5 cu. ft.) capacity and reaches a maximum of 1200°C Four heating elements are located on…

  • The Thermo Scientific Thermolyne Industrial Benchtop Muffle Furnace has a B1 single-setpoint digital controller with ramp and dwell, 2.2L (0.08 cubic foot) heating area capacity, and a temperature range of 100 to 1,200 degrees C for general laboratory use. Four heating elements embedded in…

  • Achieve consistent temperature control with the Thermo Scientific™ Thermolyne™ Atmosphere Controlled Ashing Furnace, which reaches 975°C with the standard stainless-steel manifold and 1093°C with the optional inconel manifold.  Key Features: Adjustable gas…

  • Ramsbottom PYREX® For determination of carbon residue left on evaporating oil Meets ASTM D 524

  • 1-Zone 1800°C Tube Furnaces

    Across International

    TF1800 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality 1900 grade alumina fiber insulation and the famous Kanthal (Sweden) 1900 grade molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace…

  • GCF1200 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and the famous Kanthal (Sweden) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by…

  • 3-Zone 1200°C Tube Furnaces

    Across International

    Ai TFM3 series 3-zone tube furnaces feature the famous Kanthal (Sweden) resistance wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from…

  • Box furnace Heavy-duty door and firebrick hearth collar Compact and easy-to-use Single setpoint or programmable microprocessor controls Counter-weighted door moves upward. Four separate embedded heating elements. Provides durability for the most demanding applications. Gives unsurpassed…

  • Moldatherm® ceramic fiber insulation with embedded heating elements provides fast heat-up and recovery Setpoint and actual temperatures are displayed simultaneously on controller Heat-reflecting inner shell creates two insulating air spaces Fast, reliable, cost-effective answer for those…

  • Large Furnace TGA/DSC

    Mettler Toledo

    Large furnace TGA/DSC that’s well suited for samples up to 900µL with a temperature range up to 1100°C. Includes a 6 place microgram balance.

  • FURNACE 129CI SSP 240V

    Thermo Scientific

    Reduce energy consumption and increase heatup time with Thermo Scientific™ Thermolyne™ Benchtop 1100°C  Muffle Furnaces. The furnace is ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting…

  • 1-Zone 1700°C Tube Furnaces

    Across International

    TF1700 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • Used in applications such as drying precipitates, making ash determinations, performing fusions, ignitions and in heat treating metals, alloys and ceramics Moldatherm® insulation and heating element composite results in rapid heat-up recovery and cool-down rates Range: 200° to 1200°C Elements…

  • Similar to 5311M25 but with microprocessor control, which permits the operator to select eight ramps and eight dwell segments. Push button controls for setting program; program memory is non-volatile and will last for more than a year without power. Two year manufacturer's limited warranty.

  • The muffle furnaces L 1/12 - LT 40/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. The muffle furnaces come equipped with either a flap door or lift door at no extra charge. …

  • Small benchtop muffle furnaces Maximum temperature range of 1200°C Four controller types: A. Basic automatic B. Single setpoint C. 4 ramp, 4 dwell D. 8 ramp, 8 dwell with RS 232 Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open…

  • Assay Furnaces

    Nabertherm

    These furnaces are especially used for the assay of precious metals and ashing processes where the insulation and heating must be protected from emerging gasses and vapours. The furnace chamber forms a ceramic muffle which can easily be replaced. The assay furnace is equipped with an integrated…

  • GCF1700 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • Compact Muffle Furnace

    Across International

    CF1100 4x4x4" compact muffle furnaces with 30 segments programmable up to 1050°C. Great for small sample heating in research or dental labs. They can also be easily placed inside a glove box if desired. All our furnaces are CE compliant. Please note: Wire heating element DOES NOT have warranties.

  • Features Available in two popular chamber sizes Double shell design for lower external cabinet temperature with energy savings Moldatherm® high temperature ceramic fibre insulation with advanced graded design for fast heat-up and resistance to thermal shock Vertically hinged…

  • The high-temperature furnaces HTC 16/16 - HTC 450/16 are heated by vertically hung SiC rods, which makes them especially suitable for sintering processes up to a maximum operating temperature of 1550°C. For some processes, e.g. for sintering zirconium oxide, the absence of interactivity between…

  • 1200°C Muffle Furnaces

    Across International

    CF1200 series muffle furnaces feature the famous Kanthal (Sweden) spiral wire coils embedded in Mitsubishi (Japan) high quality alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • Select between different bottom plates and collecting pans for protection of the furnace and easy loading (for models L, LT, LE, LV and LVT). Heat-resistant gloves for protection of the operator when loading or removing hot materials, resistant to 650°C or 700°C. Various tongs for easy…

  • VTF1200 series vertical split tube furnaces feature the famous Kanthal (Sweden) spiral wire coils embedded in Mitsubishi (Japan) alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • The RD tube furnaces convince with their unbeatable price-performance ratio, very compact outer dimensions and their low weight. These all-rounders are equipped with a working tube which also serves as support for the heating wires. Thus, the working tube is part of the furnace heating which has…

  • These compact melting furnaces for the melting of non-ferrous metals and alloys are one of a kind and have a number of technical advantages. Designed as tabletop models, they can be used for many laboratory applications. The practical counter balanced hinge with shock absorbers and the spout (not…

  • Achieve rapid heat up, recovery and cool down with a tube furnace that delivers outstanding energy release, reducing thermal process cycle time. Thermo Scientific™ Lindberg/Blue M™ 1700°C Tube Furnaces feature heating elements with unique right-angle bend and sidewall mounting to…

  • For added protection, the door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition Two open coil heating elements on chamber sides assure fast heat-up with minimum…

  • This weighing furnace with integrated precision scale and software, was designed especially for combustion loss determination in the laboratory. The determination of combustion loss is necessary, for instance, when analyzing sludges and household garbage, and is also used in a variety of technical…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.