BRAND plastic cuvettes are an excellent choice for most spectrophotometry applications in the visible range. Manufactured from polystyrene (PS), they provide accurate, reliable results, even at wavelengths as low as 300nm. BRAND plastic cuvettes are compatible with most spectrophotometers and…

Minimum working capacity as shown in listings Cell bodies are of fused-wall construction. Matched sets are supplied in cushioned storage box. Includes Teflon® cover. 8491M18 cells require 8494J20 adapter to accommodate cells in standard cell carrier.

Disposable cuvettes with four optically clear sides from BRAND for use in fluorescence applications when results count.  Available in high quality polystyrene for measurements from 340nm to 800nm, as well as a proprietary polymer for precise measurements in both the visible and UV-range…

Holds 12 glass, silica or plastic disposable cuvettes (external dimensions 12.5 x 12.5 mm) Permits easy viewing of solution color to be measured Helps prevent breakage Dimensions: Approximately 6 3/4 x 2 x 1/2”H

Reliable, Reusable Glass Cuvettes. The Standard Q macro cuvette with an optical path length of 10 millimeters is made of fused quartz glass and comes in a matching pair. For measurements in the ultraviolet and visible range with a wavelength between 200 nm – 2500 nm. Accuracy by…

Spectrosil® Far UV Quartz windows, Useable range: 170 to 2700 nm Standard rectangular cells or Macro cells, Type 1, are the most common cells used in analytical chemistry. The exterior dimensions allow the cells to be used with virtually every spectrophotometer and photometer instrument…

Precision 5 mm diameter NMR tubes are made from quality Pyrex® borosilicate glass for compatibility with ground joints, valves, and vacuum racks. Made using precision bore tubing manufacturing techniques proven most reliable in NMR applications. A complete selection of tubes for all types of…

Semi-micro and micro cells have an inner width of 4 mm to 2 mm. The thickness of the base is 9 mm. All semi-micro and micro cells are for use with spectrophotometers having a beam height of 15 mm. For applications with a wave length range of interest in the visible range use our low cost Agilent…

Sample cell, 1" round plastic. Comes as a set of 2 with screw caps Used with DR/800 series colorimeter and select pocket colorimeter instruments 1 cm pathlength 10mL

Verify the performance and accuracy of your spectrophotometer right in your own lab. These permanent standards do not have to be recalibrated due to material aging. Unique material construction is scratch resistant and provides stable optical performance. Photometric Accuracy and Stray Light…

Disposable Polystyrene Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side. Standard 10 mm light path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The…

Polyethylene Fits most standard 10 mm cuvettes Flexible fins on 8495V27 caps allow tight fit with 10 mm cuvettes from most other manufacturers.

Designed for the measurement of very small samples Retain exterior dimensions of standard cells Volume range: 10 µL to 160 µL Path length: 10 mm The entrance to the sample compartment is hemispherical to eliminate sharp corners which can cause sample loss due to…

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

The Eppendorf µCuvette G1.0 microvolume measuring cell is a high-quality cuvette made of aluminum and quartz glass. It is the perfect tool for measuring high concentrations in small volumes. Higher sample concentrations require a shorter optical path length for measurements. With an optical…

The macro cell which is defined by DIN 58963 as a rectangular cell with an inner width greater than 5 mm has emerged as the standard for photometry. The most widely used macro cell is a rectangular cell with outer dimensions of 45 x 12.5 mm (height x width). The length of the cell is dependent on…

Globe Scientific's polystyrene (PS) Cuvettes are designed for use on the MLA Electra® 620, 650 and 750 analyzers.

Labomed, Inc.’s cuvettes are essential items to use with all spectrophotometers. Our cuvettes offer reliable functioning in all spectrophotometer environments and uses, with a wide variety of sizes and specifications to meet any requirements. We offer standard, micro, semi-micro, ultra micro,…

Ideal for use with DR/2400 and DR/2500 spectrophotometers. Two 25 mL, 1 inch round glass sample cells with caps (10, 20, and 25 mL marks) and four 10 mL, 1 inch round glass sample cells with caps.

UV-transparent disposable cuvettes replace expensive, fragile quartz cuvettes and are excellent for DNA,  RNA, and protein analysis between 220-900nm. Resistant to many aggressive solvents, they eliminate the tedious maintenance, cleaning, and contamination of quartz  cuvettes. Packaged…

material:  NaCl size: 41 mm × 23 mm , rectangular

Spectrofluorometer Cells With polished bottom for excitation through floor of cell Minimum working capacity 3 mL Cells can also be used for absorption measurements through 10 mm light path Cells have all four sides and bottom polished; 8429N30 furnished with Teflon cover, N19…

Approx. Frequency: 100 MHz 0.015 Wall Thickness 7 or 8 inch lengths Disposable grade NMR tubes. Each tube is supplied without sandblasted marking spot in a bundled multi-pack. Caps included but not attached.

Thermo Scientific test tube cuvettes are easy-to-use, inexpensive spectrophotometer cells for routine analyses. Optical glass 20mm pathlength For use with SPECTRONIC 20+/20D+ and Helios series spectrophotometers Pack of 12