A cost effective alternative to quartz UV-transparent Application between 220 nm and 900 nm Fits nearly all commercial photometers Superior chemical-resistance Disposable cuvettes are ideal for analysis of DNA, RNA and proteins, replacing expensive fragile quartz…

Disposable Polystyrene Cuvettes Convenient and affordable Save time with no cleaning required Prevent cross-contamination Useable in the range of 340 to 750 nm Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Disposable Methacrylate Cuvettes Convenient and affordable Save time with no cleaning required Prevents cross-contamination Useable in the range of 285 to 750 nm. Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5 x 45 mm outside…

Disposable Polystyrene Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side. Standard 10 mm light path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The…

The Thermo Scientific UV-Vis spectrophotometer cells cuvette has a sturdy quartz and PTFE construction that endures rigorous use for longer periods of time.   This product is only available to U.S. Domestic Customers.

The macro cell which is defined by DIN 58963 as a rectangular cell with an inner width greater than 5 mm has emerged as the standard for photometry. The most widely used macro cell is a rectangular cell with outer dimensions of 45 x 12.5 mm (height x width). The length of the cell is dependent on…

Optimize performance and maximize efficiency with supplies for the sample handling accessories used with Cary UV systems. These ensure the perfect fit to ensure the optimum productivity and reduced errors caused by manual cell handling. This product is only available to U.S. Domestic Customers. …

Specac′s demountable Omni Cell System presents a novel approach for the analysis of liquid, mulls, pastes, and cast film samples in UV, Vis, NIR, and IR transmission spectroscopy, with one cell mount being suitable for all applications. This transmission cell is specially designed to be…

Quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and retrieved from the cell using a…

Square, 10 mm Light Path Cells Outside dimensions approximately 12.5 x 12.5 x 46 mm high Light path: 10 mm, ±0.01mm Teflon® cover included Matched sets are supplied in cushioned storage box Cell bodies are of fused-wall construction Cells are usable in spectral…

Rectangular fluorescence cell, quartz, anaerobic, 10 mm pathlength, 3.5mL, 1/pk. Includes inlet tubing and a reservoir (1.5mL) joined to the cell using a ground glass joint, for collecting excess gas produced by anaerobic experiments. Evacuation tube is 4 mm ID, 6 mm OD and 30 mm long. Compatible…

The Agilent Technologies rectangular cell holder comes with cell lifter and cell height adjustment screws. This cell holder is compatible to use with Cary spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

10 mm diameter with 0.60 mm wall thickness ASTM type I Borosilicate glass Concentricity and camber tolerances are strictly maintained for superior performance. Shimming that may have been required with other manufacturers' tubes may no longer be necessary. All tubes are supplied with end…

Matched pair, stoppered with PTFE stopper supplied. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The beam size is ~ 3 mm diameter at the transmission position and 3.5 mm tall by 1.5 mm wide at the reflectance position. Application: For External Diffuse Reflectance Accessory (DRA) For Cary 4000/5000/6000. Consists of an Iris, Mirror Assembly, & Three Lens Options to Focus the Beam to a Smaller…

Round Glass Cuvettes are designed to fit with Abbott TDx. Made from borosilicate glass. 12 mm x 50 mm dimensions

These tubes are ideal for sealing directly to vacuum manifolds, joints or valves. 100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 4.97 (+0.0000/-0.013) mm ID 4.20 (+0.013/-0.0000) mm Wall thickness…

Type 28 cells are identical to Type 18 Micro cells, except these cells are supplied with a PTFE stopper to fit in a ground cone to reduce evaporation of volatile samples (The Type 28B comes with stoppers). The external height is 48mm plus the stopper. Micro cells are available with either clear…

Until recently, flow-through cells had measuring chambers that were either rectangular or circular in shape. These shapes were dictated by limitations in the manufacturing process and did not offer the best geometry for clean flushing and reduction of contamination. Now Agilent has developed new…

The Agilent Technologies cell base is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Holds 12 glass, silica or plastic disposable cuvettes (external dimensions 12.5 x 12.5 mm) Permits easy viewing of solution color to be measured Helps prevent breakage Dimensions: Approximately 6 3/4 x 2 x 1/2”H

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Stoppered with PTFE stopper supplied, Top section of the cell features two self-masking black walls and two translucent side walls, z height 20mm, 1/pk. Compatible with Agilent Cary 50/60 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use…

Physical Configuration: Cylindrical cell Primary use: Absorbtion measurement with low absorbing samples Clear windows: Two Instrument: Can be used with spectrophotometers that can use cylindrical cells Pathlengths available: 50, 100mm Cell top: PTFE stopper with "ground…

Disposable Methacrylate Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side Standard 10 mm Light Path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The methacrylate…