Spectrophotometer Cuvettes

Spectrophotometer Cuvettes

Products (232)

Compare Tool

Select up to 3 products

  • Agilent Cylindrical Single Cell Holder

    The Agilent Technologies single cell holder features a cylindrical design and is designed for the storage and neat organization of the cells that contain liquid sample. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Dual Path Cell, Spectrosil

    Spectrosil® Far UV Quartz windows, Useable range: 170 to 2700 nm Dual path length cells Types 52 and 53 allow for both fluorescence and absorbance measurements to be made with small volumes with a choice of two path lengths, dependent on the orientation of the cell in the cell holder. All cells...

  • Aperture mask, solid sample holder, 1 mm

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Rectangular Macro Cell

    Agilent Technologies

    Rectangular cuvettes (macro cells) are the most common type. They are compatible with virtually every UV system. Agilent offers a wide range of rectangular cells with optical path lengths from 1 mm to 100 mm. These cells have two clear windows, with adjacent windows frosted for easy handling....

  • Cuvettes for Spectrophotometry

    Jenway (Cole-Parmer)

    Jenway offer an extensive range of cuvettes for measuring liquid samples. The cuvette required will depend on the wavelength range required and the sample volume available. Glass cuvettes are only suitable for the visible region, whereas quartz may be used in both the UV and visible region. A 10mm...

  • Accessories for BRAND UV-Cuvette Disposable Spectrophotometer/Photometer Cuvettes

    The BrandTech Accessories for BRAND UV-Cuvette are designed to enhance the utility and convenience of disposable spectrophotometer and photometer cuvettes. These accessories ensure optimal performance and ease of use in laboratory settings. They are crafted to work seamlessly with the cuvettes,...

  • Cary 50 Dissolution Tubing Spares Kit

    Agilent offers replacement tubing spares and kits for the Cary UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing and inlet/outlet connections for flow cells to help you keep your system operating at peak performance. This product is only available to U.S. Domestic...

  • Spectroquant® Semi-microcells

    MilliporeSigma's Spectroquant Semi-microcells are precision-engineered for spectrophotometric analysis. These cells provide accurate measurements with minimal sample volume requirements. They are suitable for use in various research and industrial applications. Made with high-quality materials, they...

  • Flow-Through Dissolution Cell

    Agilent Technologies

    M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, z height 20mm. Compatible with Agilent Cary 100/300 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Rectangular Ultra-Micro Cell

    Agilent Technologies

    Matched pair, stoppered with PTFE stopper supplied, base thickness 12mm, self-masking black walls, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be...

  • Driver Ball

    Agilent Technologies

    The Agilent Technologies 3 mm driver ball with handle is suitable for use with spectrometry system products. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Power Cable Assembly

    Agilent Technologies

    The Agilent Technologies power cable assembly is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

  • Agilent Micro Cell Holder

    Agilent Technologies

    The Agilent Technologies micro cell holder is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic...

  • NMR Tube 3mm 7" Cs5

    DWK Life Sciences (Kimble)

    100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and...

  • Benzyl acetate for synthesis

    CAS Number: 140-11-4 Solubility: (20°C) slightly soluble Melting Point: -51°C Molar Mass: 150.17 g/mol Boiling Point: 205 - 207°C Vapor Pressure: 1 hPa (45°C) Flash Point: 95°C Refractive Index: 1.5006 (20°C, 589 nm) Explosion Limit: 0.9 - 8.4 %(V) Density: 1.06 g/cm3...

  • Cuvette Holder

    Agilent Technologies

    The Agilent Technologies cuvette holder is suitable for use with external diffuse reflectance accessory (DRA) for Agilent cary 4000/5000/6000 UV-Vis system. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis This product is only available to U.S....

  • Test Tube Holder

    Agilent Technologies

    Test tube holder, for using 16mm od test tubes in sample compartment instead of conventional cuvettes, for Cary 50/60 only. Application: For Using 16mm OD Test Tubes in Sample Compartment Instead of Conventional Cuvettes, For Cary 50/60 Only, UV-Vis & UV-Vis-NIR This product is only available to...

  • Semi Micro w/Stopper Self Masking

    A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent...

  • 5 mm Diameter NMR Tubes

    Precision 5 mm diameter NMR tubes are made from quality Pyrex® borosilicate glass for compatibility with ground joints, valves, and vacuum racks. Made using precision bore tubing manufacturing techniques proven most reliable in NMR applications. A complete selection of tubes for all types of NMR...

  • Rectangular Fluorescence Ultra-Micro Low Head Space Thermal Melt Cell

    Quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and retrieved from the cell using a...

  • Turbiquant® Empty cells

    Turbiquant® 1500/3000 Empty cells

  • semi-micro cuvette | polystyrene, minimum filling volume 1.5mL

    The semi-micro cuvette is made from high-quality polystyrene, offering reliable performance in spectrophotometric analyses. It requires a minimum filling volume of 1.5mL, making it ideal for experiments where sample volume is limited. The cuvette's optical clarity ensures accurate and consistent...

  • Assay Cuvettes

    G-Biosciences

    Spectrophotometer assay cuvettes, 1ml reaction volume, not suitable for UV absorbances. Available as 1 box of 100 cuvettes or a pack of 5 x 100 cuvettes.

  • Peristaltic Pump Tubing for UV/Vis Instruments

    Agilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or...

Compare Tool

Select up to 3 products