Cuvette Holder

…Cuvette Holder Maintenance FREE Cuvette Holder with Temperature Control Designed for open measurements: don’t lose time with closing a lid for each reading. Ideal for all UV/Vis spectroscopy applications including kinetics. Cuvette holder optimized for all standard cuvettes…

Designed for test tubes, vials, ampules, cylinder type cuvette, etc.

Holds 12 glass, silica or plastic disposable cuvettes (external dimensions 12.5 x 12.5 mm) Permits easy viewing of solution color to be measured Helps prevent breakage Dimensions: Approximately 6 3/4 x 2 x 1/2”H

…sample holders and cuvettes, fulfill the strictest manufacturing specifications and thus contribute to accurate and reliable results. Automatic Sampling Sample loading is easily automated with the FillPalMini, which pumps the sample safely and quickly into the flow cuvette. It can also…

Center Mount Cuvette Holder

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Designed for accurate positioning of small volume cuvettes. Accommodates any standard 10 mm cells and Nano Sticks.

Spectrally matched Spectrosil® for UV quartz cells for quality control and research applications. Cuvette cells have a fused body with optically polished quartz windows. Fit all standard spectrophotometer cell holders. Legal Information: Starna is a trademark of Starna Cells Inc.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

For measurement in 1 cm cuvettes in transmission or reflectance mode.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Air-cooled Peltier thermostatted single cell holder for Thermo Scientific GENESYS 140/150/180 and BioMate 160 Spectrophotometers. The accessory fits inside the sample compartment of the instrument. Includes cell holder for 10 mm pathlength square cells Temperature range 20° C to…

The cells are designed for usewith the standard 10 mm cuvette holders of most UV/Vis andUV/Vis/NIR Spectrometers. The test solutions comprising sodiumiodide, sodium nitrite, and potassium chloride, act as a cut-offfilter with a very precise wavelength. The set is provided in arobust aluminum…

…comprising six solutions in sealed cells — two reference solutions and four test solutions. The cells are designed for use with standard 10mm cuvette holders of most UV/Vis and UV/Vis/NIR Spectrometers. Reference materials are accompanied with a Certi cate of calibration and are supplied in a…

6320D Visible Spectrophotometer supplied with power cord, pack of 100 disposable cuvettes, dual cell holder (for 10mm square cuvettes and 12.7mm diameter tubes), interface cable and PC application software on CD-ROM, 230V/50Hz.

…six solutions in sealed cells - two referencesolutions and four test solutions. The cells are designed for usewith the standard 10 mm cuvette holders of most UV/Vis andUV/Vis/NIR Spectrometers. The set is provided in two robustaluminum containers with a Certificate of Calibration.…

The 12-place cuvette holder is made from polyethylene (PE) and holds 12 cuvettes in place for preparation work, storage and protection from tipping over. When in storage, the racks are stackable. Dimensions: 170mm x 50mm x 15mm. The caps are produced from low density polyethylene (LDPE) and…

…and quantitation curves. Accessories Heated Cuvette Holder For applications where the temperature of the sample needs to be controlled there is a heated cuvette accessory. The heated cuvette holder accepts 10x10mm cuvettes and can be easily fitted and removed without the need for…

…printer or computer. Sample compartment accepts 5 mm to 100 mm pathlength cuvettes and various accessories. Both models include a four-position 10 mm square cuvette holder, one set of four matched optical glass 10 mm square cuvettes, an RS-232C interface, an operator’s manual and a dust cover.…

…Spectrometers. The set comprises four glass filters mounted in precision aluminum spring mounts. They are designed for use with the standard 10 mm cuvette holders of most UV/Vis and UV/Vis/NIR Spectrometers. The set is provided in a robust aluminum container. There are three neutral density glass…

…spectrophotometers feature auto-zeroing, automatic four cuvette holder factor mode, RS-232 interface selectable power source (110 V/60 Hz) and are available with a built-in printer. Both models include square 10 mm cuvettes (4), four cell holder, dust cover and instructions. Self masking…

…FT-IR instruments according to ASTM D7066 standards. This Environmental Hydrocarbons Application Pack contains: Two 10 mm quartz cuvettes A cuvette holder Environmental Hydrocarbons Touch Apps ™ Software Kit The Touch Apps Software Kit includes the software and SOPs to support routine…

…paper, plastic films, cloth samples, and gels. Obtain fluorescence or phosphorescence spectra of powders, paper, plastic films, cloth samples, turbid liquids View the front surface fluorescence from a filled cuvette Study the luminescence of phosphors Includes two Powder Holders (P/N 52123164)

…sample compartment lid User installable with basic tools 1182H30 10mm Square Cell Holder for GENESYS 30 Replaces the standard cell holder shipped with the instrument Cuvette holder can be removed and replaced with specialty cell holders used with earlier GENESYS instruments

Square Cell Adapter Adapts 8420Q18 test tube holder to take square cuvettes with 10 mm light path. Test Tube Holder As supplied with all models of the SPECTRONIC 20 and 20D spectrophotometers. Takes 1/2" diameter test tubes or 10-mm round cuvettes; ability to accommodate hatch COD vials. …