Chemicals Solutions E
-
Electrolyte Solution, Volumetric
Reagents®Boiling Point: 100°C Color: Colorless liquid Composition: Water 92.32%, Aluminum Potassium Sulfate Dodecahydrate 7.19%, Sodium Chloride 0.50% DOT: NOT REGULATED. Density: 1.04 Melting Point: 0°C Physical State: Liquid Shelf Life: 24 Months Solubility Information: Miscible Storage: Ambient
-
Ricca Eluent Solution
Ricca ChemicalThe Ricca Chemical eluent solution with a composition of 99.95% water, 0.03% sodium carbonate and 0.03% sodium bicarbonate, is suitable for use in ion chromatography. It can be stored at a temperature of 15 to 30 degree C. Application: For Ion Chromatography
-
-
ALDRICH Ethoxyacetylene solution, ~40wt. % in hexanes
MilliporeSigmaFormula: C2H5OC≡CH Formula Weight: 70.09 CAS No.: 927-80-0 UN Number: UN1993 Density: 0.732g/mLat 25°C Application: Used with N -vinylamides and triflic anhydride in a direct, three-component synthesis of pyridines. Also used to prepare…
-
EsterificatIon Reagent
Reagents®Composition: Pyridine 80.86%, Phthalic Anhydride 16.57%, Imidazole 2.57% Density: 1.0353 Color: Colorless to slightly yellow liquid Physical State: Liquid Shelf Life: 12 Months Storage: Ambient DOT: UN1282, PYRIDINE SOLUTION, 3, P.G. II
-
LabChem Ethanol-Benzene Mixture
LabchemThe LabChem ethanol-benzene mixture is highly flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Storage Temperature: 2-8°C
-
Synonyms: 3,8-Diamino-5-ethyl-6-phenylphenanthridinium bromide; EtBr; Homidium bromide Formula: C21H20BrN3 Formula Weight: 394.31 CAS No.: 1239-45-8 Application: Ethidium bromide (EtBr) is the most commonly used nucleic acid stain for PAGE or agarose…
-
FLUKA Ethylenediaminetetraacetic acid disodium salt solution, volumetric, 0.05 M…
Honeywell Research ChemicalsSynonyms: (Ethylenedinitrilo)tetraacetic acid disodium salt; EDTA disodium salt; EDTA-Na2 Formula: [-CH2N(CH2CO2Na)CH2CO2H]2 Formula Weight: 336.21 CAS No.: 139-33-3 Density: 1.01 g/mL at 25 °C General…
-
The LabChem 0.01M ethylenediaminetetraacetic acid in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only Titrant for water hardness
-
EDTA Titrant, 0.005M, Volumetric
Reagents®Boiling Point: 100°C Color: Colorless liquid Composition: Water 99.81%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.19% Concentration: 0.005M DOT: NOT REGULATED. Density: 1 Melting Point: 0.0°C Physical State: Liquid Shelf Life: 24 Months Solubility…
-
-
-
EDTA Titrant, 0.01M, Standardized
Reagents®Concentration: 0.01M Composition: Water 99.63%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.37% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage:…
-
Ricca Eriochrome Black TS
Ricca ChemicalThe Ricca Chemical eriochrome black TS with a composition of 94.5% methyl alcohol, 5.00% hydroxylamine hydrochloride and 0.50% eriochrome black T, is suitable for use in analytical chemistry experiments. It can be stored at a temperature of 15 to 30 degree C.
-
Etchant for Copper Alloys
Reagents®Composition: Water 86.59%, Ammonium Hydroxide 12.56%, Hydrogen Peroxide 0.85% Density: 0.96 Color: Colorless liquid Physical State: Liquid pH Range: >11.5 Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient Chemical: 500mL DOT: UN3266, CORROSIVE LIQUID, BASIC,…
-
EDTA Titrant, 0.02M, Standardized
Reagents®Boiling Point: 100°C Color: Colorless liquid Composition: Water 99.26%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.75% Concentration: 0.02M DOT: NOT REGULATED. Density: 1 Melting Point: 0°C Physical State: Liquid Shelf Life: 18 Months Solubility Information:…
-
ALDRICH Ethanesulfonic acid solution, 70wt. % in H2O
MilliporeSigmaEmpirical Formula: C2H6O3S Linear Formula: CH3CH2SO3H Formula Weight: 110.13 MDL Number: MFCD00007529 Density: 1.271 g/mL at 25 °C Refractive Index: n 20/D 1.42
-
Ensure accurate readings by using Oakton solutions with your DO meter. Replacement electrolyte should be used whenever you replace the membrane or membrane cap.
-
OmniPur® EDTA, Disodium Salt, Dihydrate, Solution
MilliporeSigmaFormula: N/A Formula Weight: N/A CAS #: Multiple Synonym(s): Ethylenediaminetetraacetic Acid, Disodium Salt, Dihydrate Solution
-
Ricca 0.5% (w/v) Eosin Y TS
Ricca ChemicalThe Ricca Chemical eosin Y TS with a composition of 99.51% water and 0.50% eosin Y, is suitable for use as adsorption indicator for argentometric titrations. It can be stored at a temperature of 15 to 30 degree C. Application: Adsorption Indicator For Argentometric Titrations
-
The Exaxol 0.1N EDTA disodium features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
LabChem Extraction Solvent
LabchemThe LabChem extraction solvent is highly flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Ricca Electrode Cleaning Solution
Ricca ChemicalElectrode cleaning solution for removal of membrane/junction protein deposits. Application: For Removal of Membrane/Junction Protein Deposits
-
The Exaxol EDTA disodium 0.500 N (0.250 M) is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Laboratory use only Tested in an ISO 17025 accredited…
-
MDL Number: MFCD00011647
-
Electrode Storage Solution
ExaxolThe Exaxol electrode storage solution is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Storing Glass and Combination Ph Electrodes
-
ALDRICH Ethylenediamine solution, technical, 75-80%
MilliporeSigmaSynonym(s): 1,2-Diaminoethane Empirical Formula: C2H8N2 Linear Formula: NH2CH2CH2NH2 Formula Weight: 60.10 MDL Number: MFCD00008204 Purity: 75-80% Beilstein Registry Number: 4123523
-
MDL Number: MFCD00011647
-
ALDRICH Ethylene oxide solution, 2.5-3.3M in THF
MilliporeSigmaEmpirical Formula: C2H4O Linear Formula: C2H4O Formula Weight: 44.05 MDL Number: MFCD00014482
-
Ethylamine solution, 2.0 M in THF
MilliporeSigmaSynonyms: Aminoethane; Monoethylamine CAS Number: 75-04-7 Formula: C2H7N Formula Weight: 45.08 Linear Formula: C2H5NH2 MDL No.: MFCD00008160 Density: 0.81 g/mL at 20 C; 0.856 g/mL at 25 C Beilstein Registry Number: 505933 UNSPSC Code: 12352000
-
The LabChem 4M potassium chloride solution in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only