Bench-Mounted Clamp (5592C10) Safety holder of cast aluminum for securing tanks 102 to 356 mm in diameter to bench or table in upright position Large cross-handle knob, which is easily turned by hand to tighten the clamping screw Large diameter rubber foot on screw prevents…

The Fyrite® Classic series includes fast, easy to use instruments for measuring carbon dioxide or oxygen. The units, while looking very similar, differ in construction and absorbing fluid. Each model is suitable for only the particular gas and measurement range for which it was manufactured.…

The Extech CO260 monitors indoor air quality for Carbon Monoxide (CO)and Carbon Dioxide (CO2) levels. In high concentrations these gases can affect the health and well-being of people and pets. Monitor CO2 levels in schools, office buildings, greenhouses, factories, hotels, hospitals,…

This DRIERITE Gas Purifier is specially designed for gas chromatography and other applications requiring dry, pure gas. It will dry, purify, and filter gases used for chromatography and spectrometry. The purifier is filled with Indicating DRIERITE and 5A Molecular Sieves for the removal of…

The Fyrite® InTech® residential analyzer is a next generation redesign of our popular Tech 50/60, developed on the proven INSIGHT® platform to include more features with a lower cost of ownership. It provides rugged, reliable, long-running performance in a light, handheld unit -…

Consisting of glass tube 8 mm outside diameter with fritted cylinder, 12 mm diameter, fused onto the lower end; overall length, 250 mm Offered in extra coarse (EC) and coarse (C) porosities

Micro size gas dispersion tube having a frit 7mm O.D. x 12mm. Stem is 6mm O.D. x 100mm long.

The DRIERITE Mini-Dehumidifier is designed for the static absorption of moisture in closed containers of up to 6 cubic feet in volume. It meets the demand for a convenient, safe and efficient drying unit for the analytical balance or other small closed compartments, such as reagent storage…

Single stage regulators for use with non-corrosive gas where single stage regulation is sufficient (5596C32, C35, C55, D40) Sintered metal filter on inlet stem to protect internal parts 2.5 inch diameter diaphragm for efficient pressure control Outlet needle valve, standard NPT(M) …

With the CO15, checking CO levels is as easy as pushing just 1 button on the model CO15, which measures up to 999ppm. An audible alarm indicator will continuously beep starting at 25ppm (preset warning level - value can be adjusted) and the display will flash until the CO level goes down to normal…

Application: Vandal-resistant deck mounted turret base with two laboratory ball valves at 180 degrees for on/off control of all laboratory gases. Valves are certified for gas service by CSA International and are recommended for ADA-compliant applications. Lever handles provide visual indication of…

Reliable pressure regulation to 1 psig (0.07 kg/cm2), indicated on a 0-60 psi (4.2 kg/cm2) gauge. Easily connects to SCOTTY 14 cylinders with the 1/8-inch NPT connector provided. You can also attach the syringe adapter (Cat. No. 609010) to the regulator for low pressure sample removal. Aluminum…

Choice of coarse or extra coarse porosity cylinder Gas dispersion tube has a hollow fritted cylinder at the end of the tube. Cylinder height x o.d.: 24 x 13 mm. stem diameter: 8 mm. Overall height: 250 mm

Features Fritware® Porous Polyethylene Disc High-density polyethylene bell-mouthed fitting with a sealed-in, coarse porosity polyethylene disc at the large end results in smaller bubbles. 30.5cm long (12") x 6.35mm ID (1/4") low-density polyethylene tube is fitted to the…

The CO240 measures Carbon Dioxide (CO2), Air Temperature and Humidity, as well as Dew Point and Wet Bulb calculations. The user settable high alarm with audible beeper is perfect for conducting a quick check of CO2 level to help adjust the environmental conditions in an enclosed area, such as a…

Features: Ergonomic pocket size housing One button operation Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm Audible alarm starting at 35ppm with continuous beeping when above 200ppm Backlight for low light conditions Max Hold and Data hold buttons …

The DRIERITE Laboratory Air and Gas Drying unit is an all-purpose drier. This unit is suitable for most laboratory applications. It will dry air to a dew point of -100° F at atmospheric pressure or pressures up to 90 psig. A simple connection by rubber hose to the bottom inlet of the dryer…

Without stopcock 5579M10 Buret is graduated from 0.5 to 50 mL in 0.1 mL divisions, tolerance ±0.10 mL.

Laboratory scale gas scrubber for use in many air and exhaust cleanup tasks. Gas scrubbing takes place when the exhaust enters the inlet in the round bottom flask and travels upward through the absorption column. The scrubbing fluid is pumped from the round bottom flask upwards into the shower head…

Accurate measurement of ppmCO Digital backlit display One button operation Resolution: 1 ppm Accurately measures carbon monoxide concentration levels in room air. Fast response sensor is electrochemically calibrated specific toCO and is factory calibrated to 100 ppm for…

Chemical-resistant, inert fluropolymer film Flexible Leakproof Applications include gas sample analysis, extraction of air samples from smoke stack exhaust systems, monitoring air quality and calibrating instruments in the field. Sturdy FEP bags are 5 mil thick and have low…

Large capacity gas dispersion tube having a frit 25mm O.D. x 70mm long. Stem is 16mm O.D. x 200 mm above the frit. Overall length is approximately 280mm.

Extech’s Refrigerant Leak Detector is easy to use and is ideal for detecting leaks from air-conditioning units and cooling systems that use all standard refrigerants. The multi-colored LED light bar indicates the level of refrigerant detected by the RD200. Features a field replaceable heated…

Laboratory scale gas scrubber for use in many air and exhaust cleanup tasks. The 3 liter is a compact design and will fit into any laboratory hood, or can be used in walk in hoods when assembled on our CG-1951-100 mobile or CG-1950-100 bench-top reactor stands. Gas scrubbing takes place when the…