Casework

Compare Tool

Select up to 3 products

1 - 32 of 58
Sort
View
Show
  • Steel Pipe Enclosures

    INSTOCK Labs

    Pipe Enclosures are used to provide a cover for pipes running from the ceiling to the work surface. This enclosure can be used for island or perimeter locations. They can support pegboards or water purification systems. The cover is pre-punched for attachment and is furnished in three…

  • Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…

  • Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…

  • Solvent Storage Standing Height Cabinet has self-closing doors and are used to store flammables and solvents. Construction meets UFC, OSHA and MFPA No. 30-1993. Includes vent bungs with flame arrestors. The doors are self-closing and synchronized so that both doors will always fully close. The…

  • Black chemical-resistant work surface Dished or flat Dished surfaces feature are contoured to fit the dimensions of the enclosure and to contain spills. They are compatible with Xpert Balance Systems & Filtered Balance Stations, Purifier Class I, HEPA Filtered & Filtered PCR…

  • Suspended Cabinet is designed to be hung from an INSTOCK table. Each suspended cabinet is furnished with complete hanging hardware.

  • Protector Acid Storage Cabinets support all Labconco benchtop fume hoods and safely store and vent acids and other corrosive liquids. Features: two rear vent connection cutouts for venting the cabinet into a fume hood; durable epoxy-coated steel construction; corrosion-resistant polyethylene-lined…

  • Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Application: Deck mounted mixing faucet with vacuum breaker and wrist blade handles for hot and cold water. Body: Forged brass. Valve Units: WaterSaver self-contained compression valve units with replaceable stainless steel seats. Handles: Forged brass wrist blade handles with…

  • Suspended Pencil Drawer is designed to be hung from an INSTOCK table. Each suspended pencil drawer is furnished with complete hanging hardware.

  • Cabinet Fillers

    INSTOCK Labs

    Corner Fillers are used to close the gap between two cabinets in a corner. Adjustable fillers can be cut to fit and include a slip fit trim angle. Front Fillers are used between adjacent base cabinets of between a cabinet and the wall. Rear and Center Fillers are used between back-to-back…

  • Cold Water Faucet

    INSTOCK Labs

    Cold Water Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.

  • Used for venting the Protector Acid Storage Cabinet through the SpillStopper Work Surface and into the fume hood. Includes one plastic vent tube assembly complete with 2" diameter threaded connection locknut, flexible tubing and vent extension

  • Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

  • These Chase Support Assemblies are adjustable height, floor mounted, support assemblies for work surfaces as well as drain line and plumbing chase for piping.

  • Base Stands

    Labconco

    Adjustable height accommodates persons sitting or standing Support Protector, Protector XL Benchtop, HOPEC IV. Basic fume hoods, Paramount Ductless Enclosures, Purifier Class I and HEPA Filtered Enclosures, Purifier Clean Benches, PCR Enclosures, Protector XVS Ventilation Station and XPert…

  • Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate…

  • Available with fixed feet or casters Telescoping Base Stands with Fixed Feet: provide support for a variety of Labconco fume hoods and enclosures. Stands have removable pins to adjust the legs to eight different heights in 1" increments from 27.5" to 34.5". Four fixed…

  • Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Manual Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with hand crank so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons…

  • Sitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • End Supports

    INSTOCK Labs

    Panel End Supports are to be used in place of a cabinet at one end of a cabinet run to support drawer frames or apron rails. Can be used to support the intersection of two aprons or rails.

  • Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate…

  • Wire super slide is made of nickel-chrome wire with clear protective coating. Only for use with 24" deep units. Designed to hold metro totes.

  • Wall Cabinets

    INSTOCK Labs

    Wall Cabinets are to be hung on a wall typically above a run of base cabinets. Wall cabinets come with two adjustable shelves and feature a flush bottom. Each wall cabinet includes a hanging rail.

  • Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

  • Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Acid Storage Standing Height Cabinet are used to store acids and are lined with a chemically resistant polyethylene liner. Full height doors are lined with 1/8" thick polyethylene. Chemical resistant 3/16" thick molder polyethylene lining with coved corners and 2" lip at front…

  • 4ft Stand adjustable from 26” to 37”. Work surface height of  28” to 39”. Leveling Feet. Shipped flat. Esco offers Support Stands for all its cabinets that complement their style and appearance. These accessories provide a complete floor-standing system with…

  • Wall Mount Bracket Countertop Support is used to support spans of work surface without structure mounted on the floor. Adequate in-wall blocking is required. Bracket is 11 gauge with a 2" wide return flange with mounting holes at the top and rear of the bracket.

Compare Tool

Select up to 3 products