Chemical Test Kits

Compare Tool

Select up to 3 products

HomeAll Products

Chemical Test Kits

1 - 32 of 76
Sort
View
Show
  • Hydrogen Peroxide EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Our hydrogen peroxide test kit is used to verify the concentration levels of hydrogen peroxide used in the cleaning and sanitation industry. It is used to test hydrogen peroxide levels in sanitizer applications, wash water applications and waste water applications. Concentration levels are…

  • Chlorides are tested to control the blow down from boiler and cooling systems in industrial water treatment. The sample is titrated with a standard solution of silver nitrate with chromate used as the indicator. Mercuric nitrate titrants are available for lower level detections. Each kit is…

  • This is a method for the determination of Cetamine Filming Amines (CFA) in boiler water, boiler feed water, condensate and other systems. In acidic solution CFA form a pink colored complex with Rose Bengale that is color stable for 1 hour. The extinction of the pink complex is measured against a…

  • Nitrite EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Nitrite is most often used in closed systems as a corrosion inhibitor. We offer both the permanganate method and the CAN test method. Most of our customers have upgraded to the simple CAN method which can be used in systems with glycol, and it is easier to run. Each kit is packaged in a durable…

  • Hardness EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Calcium and magnesium salts dissolved in water cause hardness which can lead to scale. A standard solution of chelant is used to titrate the hardness in the sample. The indicator changes from red to blue at the titration end point. We offer a variety of hardness test kits including total, calcium,…

  • We offer free and total chelant test kits for industrial water applications. Results are expressed ppm EDTA. Chelants are important because of their ability to tie up metal ions in a solution. Chelants may be used with sequestering agents to prevent calcium and magnesium scaling and iron and copper…

  • Cyclohexanone

    PerkinElmer

    Cyclohexanone

  • quick-ship Sulfite EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Sulfites are used to remove dissolved oxygen from the treatment water. Excess sulfite at elevated temperature combines with oxygen to reduce pitting. Remember to cool your samples quickly and perform the test immediately. Each kit is packaged in a durable plastic case and includes all items to…

  • The sample is titrated with a standard acid solution to a speci c pH endpoint. Phenolphthalein, pH 8.3 which is P Alkalinity / Total Alkalinity Indicator, pH 4.6 which is T Alkalinity. Each kit is packaged in a durable plastic case and includes all items to complete approximately 60-75 tests.

  • Cleaning & Sanitation Applications Our caustic test kit is used to verify the concentration levels of caustic cleaners used in the cleaning and sanitation industry. It is used to test caustic levels in HTST, evaporators, fryers, process equipment and dryers. Concentration levels are…

  • This kit provides the most procedurally accurate simulation of the ABO/Rh blood typing technique available. In this activity, students test and determine the ABO/Rh blood types of four different simulated blood samples using Innovating Science’s new simulated blood. Students simply combine the…

  • Cleaning & Sanitation Applications EndPoint ID® Test Kits are designed to verify the concentration levels of acid cleaners used in the cleaning and sanitation industry. They can be used with acid CIP cleaners, foaming acid cleaners and manual/general acid cleaners. Concentration…

  • pH EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    pH is a very important test for industrial water treatment. Corrosion and scale can be controlled with good pH measurement. Each kit is packaged in a durable plastic case and includes all items to complete approximately 60-75 tests.

  • Orthophosphate EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    In boiler water treatment, orthophosphate is primarily added to control scaling as it reacts with calcium hardness. EndPoint ID® kits include filtering equipment, which is recommended before testing. Each kit is packaged in a durable plastic case and includes all items to complete approximately…

  • Chlorine EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    In the industrial water treatment industry, chlorine tests are used to control bio lm in cooling systems. These tests use the iodometric drop test method or the DPD method to detect free and total chlorine. In the cleaning and sanitation industry our chlorine test kits are used to verify the…

  • 2400 CHN Combustion Kit

  • Lube EndPoint ID® Test Kit

    labForce® (powered by Thomas Scientific)

    Our lube test kit is used to verify the concentration levels of conveyor lube used in the cleaning and sanitation industry. Custom test factors can also be established. Each kit is packaged in a durable plastic case and includes all items to complete approximately 60-75 tests.

  • Acid Sanitizer EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Cleaning & Sanitation Applications Our acid sanitizer test kit is used to verify the concentration levels of acid sanitizer used in the cleaning and sanitation industry. It can be used to test concentration levels for hard surface sanitizing and environmental sanitizing. Concentration…

  • Learn the role of the kidney in blood filtration and waste removal along with the many tasks performed by the functional units of the kidney, called nephrons, as well as nephron structure. Students will create an artificial kidney model to filter a simulated blood solution, and will be able to…

  • Chlorine Dioxide EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Cleaning & Sanitation Applications Our chlorine dioxide test kit are used to verify the concentration levels of chlorine dioxide sanitizer used in the cleaning and sanitation industry. It can be used to test concentration levels for hard surface sanitizing, cooling towers and…

  • MTC Bio’s new 5mL MacroTubes® scale up the conveniences of standard 1.5mL tubes for larger volumes. These polypropylene tubes come with an attached cap that provides a tight, leak proof seal, and can also be opened (or closed) with one hand. The cap is designed to provide a secure seal from -86°C…

  • Acetanilide, 2 g.

    PerkinElmer

    Acetanilide is routinely used during the carbon,hydrogen, and nitrogen operation mode. The sample weightpercentages of this compound are: Carbon = 71.09% Hydrogen = 6.71% Nitrogen = 10.36% Included in PerkinElmer 2400 Series II Sulfur Analysis KitP/N N2410512.

  • Dissolved silica is found in almost all natural waters. Its presence is undesirable for many industrial uses because of scale formation. High-pressure boiler turbines are especially susceptible.  Test kits contain a reagent to remove phosphate interference as well as reagents for measuring…

  • Our scientists select the purest raw materials, condition them, then test them on PerkinElmer analyzers.

  • quick-ship Iodine Sanitizer & Teat Dip EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Our iodine sanitizer test kit is used to verify the concentration levels of iodine used in the cleaning and sanitation industry. It can be used to test concentration levels for hard surface sanitizing, foot baths, hand dips and environmental sanitizing. Concentration levels are represented in ppm.…

  • Food Processing Combination Kit

    labForce® (powered by Thomas Scientific)

    Combination Test Kit for the Food Processing industry contains: Acidity Test Kit (C859K97) Caustic Test Kit (C859L13) Chlorine Test Kit (C859L33) Chlorinated Alkaline Test Kit (C859L25) Chlorinated Alkaline Test Kit (C859L29) Peracetic Acid Test Kit (C859L74) Quat…

  • Laundry Residual Combination Kit

    labForce® (powered by Thomas Scientific)

    Laundry Residual Combination Kit Components: Test for Final Fabric pH - Sour Tester (C859L57) Chlorine OTO Residual Test Kit (C859L55) Iron Residual Test Kit (C859L56)

  • Students will be introduced to acids and bases, and test a dilute acid and dilute base with neutral litmus paper to learn how pH strips indicate if something is acidic or basic. Then, they will test common items that could be found around their household to determine if they are acids or bases.…

  • Chlorophyll is the most prevalent and well-known plant pigment related to photosynthesis. It is not, however, the only pigment necessary for photosynthesis to occur. Other pigments are also involved in the process, though they are often overlooked as they tend to be masked by the abundance of the…

  • Chlorinated Alkaline/Alkaline EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Cleaning & Sanitation Applications Our chlorinated alkaline test kit is used to verify the concentration levels of chlorinated alkaline/alkaline cleaners used in the cleaning and sanitation industry. It can be used with chlorinated alkaline/alkaline CIP cleaners, foaming chlorinated…

  • On-Premise Laundry Combination Kit

    labForce® (powered by Thomas Scientific)

    Combination Test Kit for On-Premise Laundry contains: Chlorinated Alkaline/Total Alkalinity Test Kit (C859L31) Total Hardness Test Kit (C859L43) Chlorine Test Kit (C859L33) Chlorine OTO Residual Test Kit (C859L55) Iron Residual Test Kit (C859L56) Test for Final Fabric pH - Sour…

  • Laundry EndPoint ID® Test Kits

    labForce® (powered by Thomas Scientific)

    Residual test kits are used to test for the presence of iron or chlorine and the pH level on linen or towels in the laundry industry. Each kit is packaged in a durable plastic case and includes all items to complete approximately 60-75 tests.

Compare Tool

Select up to 3 products