Bags

Compare Tool

Select up to 3 products

1 - 32 of 188
Sort
View
Show

Nasco

  • Polypropylene Autoclavable to 275°F Meets impact strength for all 50 states Meets tear strength for all 50 states Biohazard infectious waste is typically collected at the point of generation in such places as hospital laboratory and operating areas, pharmaceutical, biological,…

  • Specimen Transport Bags

    Globe Scientific

    These bags are designed for the safe transportation of specimens and documentation. Each bag is printed with the biohazard symbol and offers checkmark boxes to indicate special handling instructions. 2 mil gauge polyethylene (PE) Attached document compartment Zipper closure allows repeated…

  • Clavies® Autoclavable Bags

    Bel-Art - SP Scienceware

    Clavies® bags offer maximum protection and performance for autoclavibility. The durable .05mm thick PP bag is filled with used labware such as petri dishes, membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri…

  • The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish virtually eliminates ink smearing, and provides a surface that will accept a variety of…

  • 500 Series SealPAK Pouches

    Ampac Flexibles

    Polyester Three-Side-Seal Barrier Pouch Ampac's 500 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 500 Series SealPAKs are 4.5 mils…

  • Sterile (gamma-irradiated) polyethylene bags 65µm thick for high-impact strength (9.2MPa tensile, 27.1MPa ultimate) even at low temperatures Permeability (g/m2/24 hr.): 1.2 water vapor, 12,000 oxygen, 2000 carbon dioxide Closure bags feature wire closure strip across bag top and…

  • Specifically designed for use with homogenizer blenders Easy and efficient sample testing Made from extra-heavy polyethylene Perforated polyethylene filter layer, sealed into perimeter of sides and bottom, allows sample to be placed into bag on either side. Liquid will transfer…

  • Labplas introduces a new line of products specifically for the food industry. Labplas introduces a new line of products specifically for the food industry. In food factories, several tests must be performed on surfaces which come into contact with food as well as environmental surfaces, to…

  • Autoclave Bags, Red

    Action Health

    Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read…

  • Economical and convenient, this benchtop disposal system is perfect for collecting pipette tips, microcentrifuge tubes, etc. during daily use. Rectangular steel wire frame holds a polyethylene bag 22 x 28cm (8-1/2 x 11");  coated in easy to clean, durable, orange color epoxy …

  • The original zip bags with the Red Color Line™ Low density polyethylene Leak resistant High chemical compatibility Patented zipper closure Only Minigrip bags are identified by The Red Color Line, which signifies quality bags with an easy open/close zipper feature and…

  • The job of collecting water samples is easier with the Whirl-Pak® Stand-Up Thio-Bag®! A special gusset on the bottom of the bag flattens out when water is put in the bag, allowing it to stand up completely by itself. No rack or other holder is needed to keep the bag upright. Forget washing and…

  • Sample bags are designed to withstand the paddle action of Stomacher lab blenders. All standard and closure bags are made of highly transparent polypropylene and have wide-sealed bottoms to prevent leaks. Bags with 4mil wall thickness are for analyses of firmer samples. Standard bags are made…

  • These high temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard…

  • SANI-STICK

    Labplas

    The SANI-STICK is convenient and easy-to-use and helps eliminate several time-consuming steps! The SANI-STICK is designed to collect samples to detect the presence of microbiological contaminations on any surface. The SANI-STICK makes it easy to swab hard-to-reach areas. These sponges with…

  • 400 Series SealPAK Pouches

    Ampac Flexibles

    Polyester Three-Side-Seal Barrier Pouch Ampac's 400 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 400 Series SealPAKs are 2.5 mils…

  • Scienceware® Autoclave Bags

    Bel-Art - SP Scienceware

    Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch…

  • Tufpak is the original manufacturer of Autoclave Bags to industry. Autoclaving (Steam sterilization) is the most efficient and economical wet thermal disinfection process. Hazardous waste producers in research and clinical laboratories rely on this process to continually meet their obligations to…

  • The original zip bags with the Red Color Line™ Clear, polypropylene bags Leak resistant High chemical compatibility Patented zipper closure Only Minigrip bags are identified by The Red Color Line, which signifies quality bags with an easy open/close zipper feature…

  • Dishwasher and autoclave safe, the reusable Clavies® Biohazard Bag Holder Cover opens quickly and easily by pressing the built-in release tab – no batteries required! The cover fits both the Medium and Large sizes of the Clavies® Biohazard Bag Holders (F13192-0002 and F13192-0003) and…

  • Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.

  • Self seal sterilization pouches with bio indicator.

  • Labplas SECURE-T® Blender Bags provide a malleable yet durable and contaminant-free container for the even blending of your samples. Uniform sample distribution ensures that your extraction is an accurate subset of your original sample. Applications vary from general blending purposes to sample…

  • Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for…

  • The special glue closure of our specimen transport bags offer a liquid-tight tamper evident seal. Simply pull off the liner to expose the glue adhesive and press to close. 1.5 mil gauge polyethylene (PE) Attached document compartment Glue closure tamper evident seal Imprinted with…

  • No matter how big the sample, we have the bag for it. At Labplas, we offer a multitude of sizes including large format bags, with or without our closure system.

  • These Cardinal Health low-temperature self-seal pouches are an excellent choice for devices requiring low-temperature sterilization. They are produced without an indicator for all types of low-temperature sterilization and EO. Heavy-duty Tyvek® material provides superior barrier and strength…

  • Biohazardous Waste Bags

    Medegen Medical Products

    Meet A.S.T.M Dart Test Requirements, LLDPE Film, Flat Pack

  • KeepSafe® Evidence bags are the most secure evidence bags in the industry. These tamper-evident bags feature a high level closure to prevent evidence from being compromised, and to support good chain-of-custody procedures. Ampac's KeepSafe Ultra closure protects against all known methods of…

  • Heat Sealer

    Ampac Flexibles

    Multi-Purpose Heat Sealer Ampac’s multi-purpose heat sealers are excellent for use with Ampac's 400 Series and 500 Series SealPAK, SilverPAK, StandPAK and SpeciPAK laminated pouches. Features: Air-tight, thermal seal, 5/8” wide Preset thermostat maintains…

  • Sampling Bags

    MTC Bio

    MTC Bio's Sample Sealer™ leak-proof and airtight bags are the ideal for sterile sampling and storage of liquid, powder or solid samples.

  • Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F (82° C). Bags can be frozen to any temperature, even liquid nitrogen – careful handling required after…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.