Bags

Compare Tool

Select up to 3 products

1 - 32 of 196
Sort
View
Show
  • Polypropylene Autoclavable to 275°F Meets impact strength for all 50 states Meets tear strength for all 50 states Biohazard infectious waste is typically collected at the point of generation in such places as hospital laboratory and operating areas, pharmaceutical, biological,…

  • Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling. 6 oz. bag has 4 oz. fill line.…

  • Clavies® Autoclavable Bags

    Bel-Art - SP Scienceware

    Clavies® bags offer maximum protection and performance for autoclavibility. The durable .05mm thick PP bag is filled with used labware such as petri dishes, membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri…

  • Sterile (gamma-irradiated) polyethylene bags 65µm thick for high-impact strength (9.2MPa tensile, 27.1MPa ultimate) even at low temperatures Permeability (g/m2/24 hr.): 1.2 water vapor, 12,000 oxygen, 2000 carbon dioxide Closure bags feature wire closure strip across bag top and…

  • The original zip bags with the Red Color Line™ Low density polyethylene Leak resistant High chemical compatibility Patented zipper closure Only Minigrip bags are identified by The Red Color Line, which signifies quality bags with an easy open/close zipper feature and…

  • Scienceware® Bench-Top Biohazard Bags

    Bel-Art - SP Scienceware

    Autoclavable bags have one long flap to facilitate easy opening. When picking up individual pieces of waste that need to be discarded, the bag is turned inside out, over the hand, then turned right side out with waste safely inside the bag. Measures 22 x 28cm (8 1/2 x 11"). 100 per pack. …

  • Labplas introduces a new line of products specifically for the food industry. Labplas introduces a new line of products specifically for the food industry. In food factories, several tests must be performed on surfaces which come into contact with food as well as environmental surfaces, to…

  • Sterile polyethylene bags with sodium thiosulfate Disposable, transparent bags for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples…

  • The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish virtually eliminates ink smearing, and provides a surface that will accept a variety of…

  • Bright red polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety. Sterilization patch darkens when subjected to steam sterilization Hgh temperature steam autoclavable to 135°C…

  • Our 3-wall clear Biohazard bags have an outer pouch to keep paperwork separate and dry, a pre-printed biohazard symbol, and check boxes for processing. Our Biohazard bags feature a reclosable zipper that secures all contents inside the bag.

  • Specifically designed for use with homogenizer blenders Easy and efficient sample testing Made from extra-heavy polyethylene Perforated polyethylene filter layer, sealed into perimeter of sides and bottom, allows sample to be placed into bag on either side. Liquid will transfer…

  • 500 Series SealPAK Pouches

    Ampac Flexibles

    Polyester Three-Side-Seal Barrier Pouch Ampac's 500 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 500 Series SealPAKs are 4.5 mils…

  • Dual pouch design features a reclosable polybag for secondary leakage containment, plus an attached open-end document pouch that allows essential paperwork to remain with the specimen Available in 2, 3 or 4-wall, plain or printed with red-and-black biohazard print. Packed 1,000 per case. Inner…

  • Labplas SECURE-T® Blender Bags provide a malleable yet durable and contaminant-free container for the even blending of your samples. Uniform sample distribution ensures that your extraction is an accurate subset of your original sample. Applications vary from general blending purposes to sample…

  • Biopsy Bags

    Electron Microscopy Sciences

    Made from nylon cloth, 0.2mm mesh diameter All seams are heat-sealed Allows for unrestricted fluid movement around the tissue Reduces the loss of small biopsy specimens Reduces cross contamination and pressure artifacts by using sponges

  • Stand-Up Sample Bags The Whirl-Pak® Stand-Up Bag makes sample handling and testing much easier because it gives users the ability to perform important laboratory functions with both hands, because the bag will stand completely by itself. No rack or other holder is needed to keep the bag upright.…

  • Scienceware® Autoclave Bags

    Bel-Art - SP Scienceware

    Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch…

  • The special glue closure of our specimen transport bags offer a liquid-tight tamper evident seal. Simply pull off the liner to expose the glue adhesive and press to close. 1.5 mil gauge polyethylene (PE) Attached document compartment Glue closure tamper evident seal Imprinted with…

  • 7 oz./207 ml capacity 3-3/4” W x 7” L (9.5 cm x 18 cm) 3.0 mil, .076mm thick Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180°…

  • For Homogenizer Blenders Specially designed for use with homogenizer blenders Whirl-Pak® sample bags are specially designed for use with homogenizer blenders. They are made from extra-heavy polyethylene with a strong perimeter seal. New size 1303N29 features a filter layer to separate the…

  • Clavies® Autoclavable Bags

    Bel-Art - SP Scienceware

    Safe and convenient biohazard disposal 0.05 mm, 2 mil polypropylene Autoclavable at 121°C Transparent For maximum protection and convenience when disposing of biohazardous waste. Three sizes hold 65, 200 or 240 standard petri dishes. Ideal for autoclaving discarded membrane filters, culture…

  • Biohazard Disposal Bags

    Heathrow Scientific

    For personal or general lab use, sizes to suit all needs A range of biohazard collection bags printed with biohazard warning symbol and precautions in English, Spanish, and French Polypropylene Thickness: 1.57 mil Includes an indicator patch that darkens when autoclaved …

  • Scienceware® Polyethylene Sample Bags

    Bel-Art - SP Scienceware

    Transparent, general purpose bags, useful for sample storage, protective wrapping, etc. Offered in two gauges Can be heat-sealed or tied shut. Ties are not supplied (see 1304J55).

  • Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for…

  • Paper Self-Seal Pouches

    Cardinal Health

    Our paper self-seal pouches feature all of the benefits of our regular paper pouches without the need to heat seal. Our extra-strength adhesive provides heat-seal performance with self-seal convenience.

  • 400 Series SealPAK Pouches

    Ampac Flexibles

    Polyester Three-Side-Seal Barrier Pouch Ampac's 400 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 400 Series SealPAKs are 2.5 mils…

  • The Seward Stomacher® 400 EVO provides maximum performance whilst minimising noise and consumable waste. For sample volumes from 80 ml to 400 ml, the EVO offers fast reliable blending and homogenisation of a broad range of laboratory samples. Quiet and efficient blending Unique…

  • Sample bags are designed to withstand the paddle action of Stomacher lab blenders. All standard and closure bags are made of highly transparent polypropylene and have wide-sealed bottoms to prevent leaks. Bags with 4mil wall thickness are for analyses of firmer samples. Standard bags are made…

  • The job of collecting water samples is easier with the Whirl-Pak® Stand-Up Thio-Bag®! A special gusset on the bottom of the bag flattens out when water is put in the bag, allowing it to stand up completely by itself. No rack or other holder is needed to keep the bag upright. Forget washing and…

  • Heat Sealer

    Ampac Flexibles

    Multi-Purpose Heat Sealer Ampac’s multi-purpose heat sealers are excellent for use with Ampac's 400 Series and 500 Series SealPAK, SilverPAK, StandPAK and SpeciPAK laminated pouches. Features: Air-tight, thermal seal, 5/8” wide Preset thermostat maintains…

  • The 2 mil Minigrip Zip-Top Reclosable Bags are perfect for standard use and provide superior clarity. The 4 mil Minigrip Zip-Top Reclosable Bags are perfect for heavier use and provide superior clarity. The Minigrip zipper closure keeps out dirt and moisture and the heavy-duty zipper prevents…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.