Bags

Compare Tool

Select up to 3 products

1 - 32 of 201
Sort
View
Show

Nasco

  • Polypropylene Autoclavable to 275°F Meets impact strength for all 50 states Meets tear strength for all 50 states Biohazard infectious waste is typically collected at the point of generation in such places as hospital laboratory and operating areas, pharmaceutical, biological,…

  • Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling. 6 oz. bag has 4 oz. fill line.…

  • Clavies® Autoclavable Bags

    Bel-Art - SP Scienceware

    Clavies® bags offer maximum protection and performance for autoclavibility. The durable .05mm thick PP bag is filled with used labware such as petri dishes, membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri…

  • Sterile polyethylene bags with sodium thiosulfate Disposable, transparent bags for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples…

  • Specimen Transport Bags

    Globe Scientific

    These bags are designed for the safe transportation of specimens and documentation. Each bag is printed with the biohazard symbol and offers checkmark boxes to indicate special handling instructions. 2 mil gauge polyethylene (PE) Attached document compartment Zipper closure allows repeated…

  • The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish virtually eliminates ink smearing, and provides a surface that will accept a variety of…

  • 500 Series SealPAK Pouches

    Ampac Flexibles

    Polyester Three-Side-Seal Barrier Pouch Ampac's 500 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 500 Series SealPAKs are 4.5 mils…

  • Economical and convenient, this benchtop disposal system is perfect for collecting pipette tips, microcentrifuge tubes, etc. during daily use. Rectangular steel wire frame holds a polyethylene bag 22 x 28cm (8-1/2 x 11");  coated in easy to clean, durable, orange color epoxy …

  • Bright red polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety. Sterilization patch darkens when subjected to steam sterilization Hgh temperature steam autoclavable to 135°C…

  • Scienceware® Bench-Top Biohazard Bags

    Bel-Art - SP Scienceware

    Autoclavable bags have one long flap to facilitate easy opening. When picking up individual pieces of waste that need to be discarded, the bag is turned inside out, over the hand, then turned right side out with waste safely inside the bag. Measures 22 x 28cm (8 1/2 x 11"). 100 per pack. …

  • The original zip bags with the Red Color Line™ Low density polyethylene Leak resistant High chemical compatibility Patented zipper closure Only Minigrip bags are identified by The Red Color Line, which signifies quality bags with an easy open/close zipper feature and…

  • Labplas SECURE-T® Blender Bags provide a malleable yet durable and contaminant-free container for the even blending of your samples. Uniform sample distribution ensures that your extraction is an accurate subset of your original sample. Applications vary from general blending purposes to sample…

  • Sterile (gamma-irradiated) polyethylene bags 65µm thick for high-impact strength (9.2MPa tensile, 27.1MPa ultimate) even at low temperatures Permeability (g/m2/24 hr.): 1.2 water vapor, 12,000 oxygen, 2000 carbon dioxide Closure bags feature wire closure strip across bag top and…

  • The 2 mil Minigrip Zip-Top Reclosable Bags are perfect for standard use and provide superior clarity. The 4 mil Minigrip Zip-Top Reclosable Bags are perfect for heavier use and provide superior clarity. The Minigrip zipper closure keeps out dirt and moisture and the heavy-duty zipper prevents…

  • For Homogenizer Blenders Specially designed for use with homogenizer blenders Whirl-Pak® sample bags are specially designed for use with homogenizer blenders. They are made from extra-heavy polyethylene with a strong perimeter seal. New size 1303N29 features a filter layer to separate the…

  • Clavies® Biohazard Bag Holders

    Bel-Art - SP Scienceware

    The stainless steel wire frame and bottom is designed to securely support the bag and its contents. In addition, the polypropylene bottom also serves as a containment tray in the event of inadvertent bag leakage. Tray is safety orange in color for easy identification as a biohazard containment…

  • Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for…

  • Labplas introduces a new line of products specifically for the food industry. Labplas introduces a new line of products specifically for the food industry. In food factories, several tests must be performed on surfaces which come into contact with food as well as environmental surfaces, to…

  • Our 3-wall clear Biohazard bags have an outer pouch to keep paperwork separate and dry, a pre-printed biohazard symbol, and check boxes for processing. Our Biohazard bags feature a reclosable zipper that secures all contents inside the bag.

  • 7 oz./207 ml capacity 3-3/4” W x 7” L (9.5 cm x 18 cm) 3.0 mil, .076mm thick Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180°…

  • Stand-Up Sample Bags The Whirl-Pak® Stand-Up Bag makes sample handling and testing much easier because it gives users the ability to perform important laboratory functions with both hands, because the bag will stand completely by itself. No rack or other holder is needed to keep the bag upright.…

  • Dual pouch design features a reclosable polybag for secondary leakage containment, plus an attached open-end document pouch that allows essential paperwork to remain with the specimen Available in 2, 3 or 4-wall, plain or printed with red-and-black biohazard print. Packed 1,000 per case. Inner…

  • With the TWIRL'EM clean room application packaging, you can bring your sterile sampling bags into your clean room without any worries about contaminations. The bags are double pouched in packs of 25 so you can remove the outer bag before entering the clean room which minimize the number of bags…

  • The Seward Stomacher® 400 EVO provides maximum performance whilst minimising noise and consumable waste. For sample volumes from 80 ml to 400 ml, the EVO offers fast reliable blending and homogenisation of a broad range of laboratory samples. Quiet and efficient blending Unique…

  • Paper Self-Seal Pouches

    Cardinal Health

    Our paper self-seal pouches feature all of the benefits of our regular paper pouches without the need to heat seal. Our extra-strength adhesive provides heat-seal performance with self-seal convenience.

  • Specifically designed for use with homogenizer blenders Easy and efficient sample testing Made from extra-heavy polyethylene Perforated polyethylene filter layer, sealed into perimeter of sides and bottom, allows sample to be placed into bag on either side. Liquid will transfer…

  • Sample bags are designed to withstand the paddle action of Stomacher lab blenders. All standard and closure bags are made of highly transparent polypropylene and have wide-sealed bottoms to prevent leaks. Bags with 4mil wall thickness are for analyses of firmer samples. Standard bags are made…

  • STAT Specimen Bags

    Globe Scientific

    Globe Scientific's STAT specimen transport bags are tinted red to indicate urgency and special handling procedures. They are designed for the safe transportation of specimens and documentation. Each bag is printed with the biohazard symbol, bold STAT lettering and offers checkmark boxes to indicate…

  • Scienceware® Autoclave Bags

    Bel-Art - SP Scienceware

    Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch…

  • The original zip bags with the Red Color Line™ Clear, polypropylene bags Leak resistant High chemical compatibility Patented zipper closure Only Minigrip bags are identified by The Red Color Line, which signifies quality bags with an easy open/close zipper feature…

  •   America's healthcare professionals prefer Lab Guard's easy "open and close” zipper technology and grip ridges. Lab Guard's biohazard specimen transport bags are supplied by the company that's synonymous with reclosable bags and are trusted by…

  • Heat Sealer

    Ampac Flexibles

    Multi-Purpose Heat Sealer Ampac’s multi-purpose heat sealers are excellent for use with Ampac's 400 Series and 500 Series SealPAK, SilverPAK, StandPAK and SpeciPAK laminated pouches. Features: Air-tight, thermal seal, 5/8” wide Preset thermostat maintains…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.