Heating/Cooling Blocks

Compare Tool

Select up to 3 products

HomeAll Products

Heating/Cooling Blocks

1 - 32 of 78
Sort
View
Show
  • IncuBlock™ Mini Dry Baths

    labForce® (a Thomas Scientific Brand)

    Compact, fits on any crowded benchtop Exchangeable blocks for 0.2 to 50ml tubes Simple touchpad, digital control Blocks sold separately With its compact construction, broad temperature range, and multiple block options, the IncuBlock™ Mini is the perfect tool for laboratory…

  • Maintain your PCR samples at 4°C for up to 2.5 hours The SBS-sized cooling blocks, available in pink and yellow, are the perfect PCR accessory. Once frozen for 8 hours at -20°C, they turn from pink to purple or from yellow to green, respectively, and maintain a temperature of 4°C…

  • Eppendorf Tube® 5.0 mL System. Eppendorf Tubes are the benchmark for simple and safe sample preparation from 0.5 to 2.0 mL. For larger volumes, 15 mL and 50 mL conical tubes are commonly used. With medium sample volumes you may face an issue: they need to be processed with large conical screw…

  • Built for Life Sciences The new AccuBlock™ Mini Compact Dry Bath combines digital control, a fast heating microtube block and a convenient AccuRack™ transfer system, all in an ultra compact footprint. With a temperature range to 100°C which can be set in increments of…

  • Dri-Block Dry Heat Baths

    Techne (Cole-Parmer)

    For precise temperature control; ±0.1°C Provide a safe, dry, constant temperature source in the laboratory for the purpose of incubation, boiling, inactivation, wet ashing, enzyme analysis, and a variety of clinical and industrial applications. NOTE: aluminum insert blocks are not included.

  • Microcentrifuge Tubes (5890J51, 5890J55, 5890J61, 1231R87, 1231R88) Constructed from a solid anodized aluminum block, the close contact of tubes to block walls allows for maximum heat retention. Single block. Titer Plate (5890J65) Constructed from a solid anodized aluminum block. Ideal for…

  • The DynaBloc heating system supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within various sizes of small, vials and tubes. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm)…

  • Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Weight: 5.0 lbs Weight metric: 2.3 kg Dimensions: 6.0" x 8.0" x 1.5"

  • Multi-purpose use Holds interchangeable modular blocks Analog controls High wattage, constant-temperature Dry Block Heaters are economical, versatile and compact. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays,…

  • isoBlock™ Digital Dry Baths

    Benchmark Scientific

    The new IsoBlock from Benchmark contains two isolated block chambers. Each chamber is controlled independently, allowing the dry bath to serve as two dry baths in one. The hinged (and removeable) lid is designed with a dividing wal, when the lid is closed this dividing wall acts as a barrie,…

  • The new MyBlock™ HL is the first and only mini heat block featuring a heated lid for protecting samples against unwanted condensation and evaporation. Both the block and lid temperature can be selected independently in increments of 0.1°C, making this MyBlock the ideal choice for the…

  • A broad temperature range, to 150ºC, makes the Digital Dry Baths useful for a variety of applications in molecular biology, histology, clinical, environmental and industrial laboratories. A microprocessor regulates the high wattage heaters in the baths to provide precise, accurate control. The…

  • New improved features make the Labnet Digital Dry Baths an excellent choice for a variety of applications. The Labnet Digital Dry baths are available in single, dual, and four block configurations and provide a broad temperature range up to 150°C, which makes them useful for a variety of…

  • Dry Bath Accessories

    Torrey Pines Scientific

    Precision machined from solid aluminum Black anodized to transfer heat better and to protect blocks from spills. The bottoms of the blocks are machined to “nest” on the EchoTherm™ Heater/Chillers and Electronic Ice Cube™ Chiller to prevent movement.

  • Dry Block Heaters

    IKA Works

    Digital block heater provides precise temperature control in small vessels. Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling…

  • Dry blocks for us with Grant Dry Block Heating Systems: QBD1, QBD2, QBD4, QBH2, QBA1 and QBA2.

  • Aluminum heat transfer block, 9594-12 for use in place of a glass sand bath in Microscale experiments. Offers excellent heat transfer and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect…

  • Designed to achieve precise temperature stability and uniformity with an easy-to-use touch screen controller. With 1, 2 and 4 block models, a broad range of heat blocks and a wide temperature range of ambient +5°C to 130°C, you’re sure to find the dry bath to fit your application…

  • Aluminium Dri-Block® Inserts

    Techne (Cole-Parmer)

    Manufactured from anodised aluminium, Techne has the widest choice of interchangeable block inserts of any manufacturer. This allows Techne Dri-Block® heaters to accommodate the widest variety of microtubes, test tubes, cups, plates, cuvettes and vials on the market, resulting in the most…

  • myBlock™ Mini Digital Dry Baths

    Benchmark Scientific

    With its compact construction, broad temperature range, and multiple block options, the myBlock Mini is the perfect tool for laboratory incubations. The simple touch pad controls and a digital display provide for "set and walk away" temperature selection and unrivaled accuracy. While…

  • Digital Dri-Block® Heaters

    Techne (Cole-Parmer)

    Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years. Now Techne® are proud to introduce the new, updated 2014 range offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of…

  • Heat Transfer Block, Minivials, Synthware, Holds 3.0 and 5.0 mL heavy wall reaction vials.

  • H-C Mixer

    Boekel

    Microtube Thermoshaker Digital Microprocessor Control Adjustable speed provides gentle or vigorous mixing action Temperature range from -18°C to 99°C offers great functionality in the life science lab Four thermal block configurations accommodate MC tubes, Standard/Deep-well…

  • An Aluminum Single Block filled with Lab Armor Beads. Capacity: 0.25L and 0.50L of Beads, Thermal Uniformity: 'At 95°C to +/- 1.0°c w/Lid. LxWxH: 3.25 x 2.5 x 2.5 inches (8.4 x 6.4 x 6.4 cm). Variety of Colors.

  • Analogue Dri-Block® Heaters

    Techne (Cole-Parmer)

    Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years, offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of precision temperature control for general, routing applications and…

  • This is a single block, 20 x 2.0 mL tubes, for use with Corning® LSE™ Digital Dry Bath Heater.

  • Benchmark Scientific Block

    Benchmark Scientific

  • For use with MTPs, PCR plates and up to 2 x 96 0.2 mL PCR tubes and tube strips Load MTPs and PCR plates directly To spin down individual PCR tubes or tube strips, PCR plates and MTPs without frame, use the Work tray and Frame Rotor is autoclavable at 121°C, 20 min Two MTPs can be…

  • Optitherm™ blocks provide a SAFE and cost effective solution for replacing your existing oil baths and heating mantles. The innovative PTFE shield on the unit reduces the exterior exposed surface temperature by as much as 100°C. For example, the PTFE shield would be approximately 80°C…

  • DryBlock™ Dry Bath

    ACTGene, Inc.

    Temperaure set between 0-100°C with programmable time up to 24 hours. Allow for up to 3 segments of time phases and temperature ramps. Each segment runs automatically to the next segment. The interchangement of different blocks is easy and convenient. Applications: Enzymatic…

  • Chill, freeze or heat and run unattended temperature profiles automatically Precise, digital control Energy efficient Peltier design Control at ambient Temperature ramping at exact rates Built-in data logger Applications include unattended restriction digestions or…

  • Mini Dry Bath

    Walter Products

    Walter T-MDB Mini Dry Bath is a microprocessor-controlled product. It is widely used in preservation and reactions of samples, DNA amplification, and initial denaturation of electrophoresis and so forth. The LCD display is very easy to setup and use, and it is quite compact, as it can fit in the…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.