Stainless steel dish with lid for use as an oil bath when used in conjunction with a hot plate stirrer having a thermocouple connection. Available in three sizes, complete with lids.

Filter small volumes  Ground glass connection points Funnel, Base, and Flask Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such…

This distillation set, made from heat-resistant borosilicate glass, is often purchased to produce small amounts of essential oils and perfumes. Includes: 1 Round Bottom Boiling Flask, 500ml capacity with a 24/40 ground glass joint (#FRB500-24-40) 1 Erlenmeyer Flask, 500ml capacity…

Filter small volumes  3 funnel sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet…

Components used to perform the Williamson experiments described in Macroscale and Microscale Organic Experiments are included. 748000-0000 is packed in a rugged polyethylene storage case (2-1/2" H x 13-1/2" W x 10" D) with a die cut foam insert 748000-0005 is in an…

Designed to address the experiments detailed in the Williamson text Macroscale and Microscale Organic Experiments published by D.C. Heath and Company, Lexington, Massachusetts. These experiments can also be performed with the KONTES Microscale Kit (1217C23). Students use the separatory funnel…

This set is made from high-quality borosilicate glass and all joints are ground 19/22. Set Includes: 1 West condenser 1 Distilling Column 1 Round-bottom flask, 500ml 1 Round-bottom flask, 250ml 1 Round-bottom flask, 100ml 1 Round-bottom flask, 50ml 1 Round-bottom flask, 25ml …

These borosilicate glass indicator adsorption columns are used to determine saturates, nonaromatic olefins and aromatics in petroleum fractions that distill below 315°C as specified in ASTM Method D-1319. The standard flourescent indicator column is drawn to a fine point for retaining silica…

Conforms to ASTM D 2274 and D 943 Cell measures inherent stability of middle distillate petroleum fuel under accelerated oxidizing conditions. Cell consists of test tube, condenser and oxygen delivery tube

MINUM-WARE® KITS, DELUXE, This kit contains the microscale components to do all of the experiments described in Organic Laboratory Techniques, Donald L. Pavia, Gary M. Lampman, George S. Kriz, Randy G. Engel, Sanders College Publishing-Chicago IL. and Microscale Organic Laboratory, Dana W.…

This test fabric is useful for testing dyes on a variety of fabrics. Accessory for Microscale Williamson kits Three-foot length of fabric four inches wide 8 strips of different fibers woven side by side: Filament acetate, bleached cotton, spun polyamide type 66, polyester disperse…

Durable stainless steel design  Can be flame sterilized The 47mm Stainless Steel Holder for the microanalysis of liquids for biological or particulate contamination under vacuum filtration. The unbreakable 304ss unit may be flame sterilized to sanitize the holder between samples.…

Basic kit is supplied complete with drawer-size polyethylene case in which components are mounted in foam The kit’s versatility enables many standard laboratory operations to be performed, such as: distillation, reaction with gas evolution, preparation or recovery, simple reflux,…

Standard size for microbiology  PTFE seal  Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The PTFE Seal holder eliminates the…

Includes steam condenser, stainless steel interior, glass door, liquid detergent and liquid acid neutralizer internal dispensing pumps. Washer must be ordered with lower injector basket, and set of 39 injectors. 115V/60Hz. Perf./cycle, e.g., 39 narrow-neck/lab glassware w/ injectors Simple…

Quality glassware assortment for use in a laboratory. Shipped in a reusable storage box. Kit includes the following items: 2ea. Beaker, Glass, 100ml, 1ea. Beaker, Glass, 250ml, 1ea. Beaker, Glass, 400ml, 2ea. Bottles, 4 oz. w/ Screw Caps, 2ea. Burets, 50ml, Mohr, 1ea. Crucible, Porcelain, 1ea.…

Organic Chemistry Kit, Synthware, Joint Size: 19/22.

Conforms to ASTM D 721 Apparatus is used in the determination of oil content and solvent extractables in petroleum waxes. Apparatus consists of Sintered glass filter stick with air inlet pressure tube, delivery nozzle, cooling tube, 24/40 joints and a pair of springs.

Glassware kit for freezone freeze dryers. Includes one 600 ml complete fast-freeze flask (7540800), one 300 ml complete fast-freeze flask (7540600), one 3/4” SST straight adapter (7547200) and one 3/4” SST 45° bend adapter (7547600).

This distillation set is made from heat-resistant borosilicate glass and held together with rubber stoppers. Includes: 1 Liebig Condenser, 300mm long with a fused inner tube (#30721) 1 Flat Bottom Boiling Flask, 500ml (#FFB500) 1 Erlenmeyer Flask, 500ml (#EF500) 1 Burette Clamp…

These Distillation Arms are made from borosilicate glass. Each have a 24/40 ground glass joint on top, but their bottom joints vary in the size. They are made to fit our biomass flasks . PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are…

Organic Chemistry Glassware sets are available in a standard set of 9 and a deluxe set of 16 pieces. The Standard set is designed to cover essential requirements for organic chemistry and is suitable for preparations up to 30g. All glassware is jointed. Both sets come in a sturdy, form fitting…

Tubing made from fine quality flint glass for easy bending, blowing, and sealing of soft glass apparatus. Tubing is 24” long and available in various diameters. Sold per pound.

Apparatus designed by James Velasco of U.S.D.A. and published in the J.O.A.C., Vol. 46, No. 5, Pages 252-255. Newly designed flask increases the efficiency and standardization of neutral oil determination by: permitting automatic transfer of weighed crude oil samples onto alumina columns;…

This convenient one pound assortment of borosilicate glass tubing includes various thicknesses and wall sizes. All pieces are 12" in length.

Filter small volumes  3 funnel sizes available Sintered Glass or Stainless Steel support Borosilicate glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter…

Borosilicate glass, lower distribution heads for model R220 rotary evaporators. Heads have improved designs by utilizing Ace-Threds for connections. Available either safety coated or in plain versions. All caps included. Inner ball joint has a CAPFE o-ring. End #15 Ace-Thred connects to the 3978…

This Corning® kit is similar to No. 6949E (Thomas 7177U65), except the components have a 14/20 Standard Taper joint. The PYREX® kit components are held in foam within a polyethylene case. The case is approximately 130mm x 256mm x 343mm. For more detail on individual components of the kit or…

Filter larger volumes of liquid  Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder…

Replacement borosilicate glass valve assemblies for model R220 rotary evaporators. Both code -07 receiving flask bottom drain assembly and code -05 distribution head valve assembly feature PTFE valve stems with Kalrez o-rings. All bushing are PTFE and supplied with CAPFE o-rings. No frozen joint…

Corning brand organic chemistry kits utilize Standard Taper ground glass joints throughout, which enables most of the standard laboratory assemblies to be constructed with ease and efficiency. They are particularly useful in teaching and research establishments where assembly time is at a premium. …

Conforms to ASTM D 525 Includes cover Container is used in the determination of stability of gasoline under accerlerated oxygen conditions. The cover prevents material that is refluxing from moving back into the bomb stem, which prevents the contamination of the sample.