A set of hardened steel trapezoidal split sleeve dry pressing die for pellet presses, ready for you to make cylinder-shape pellets. These die sets are professionally built for you to work with samples that tend to stick to the inner surface of the sleeve, trapezoidal split inner sleeves with…

Heated steel platens are available in digital (up to 650°F) or thermostat (150° to 500°F) controlled models.

A set of hardened steel dry vacuum pressing die for pellet presses, ready for you to make cylinder-shape pellets in a vacuum condition.

Self-contained, electrically operated power unit Retrofits to existing manual presses Compact bench top design Controller features a 1/4 hp DC motor, two stage hydraulic pump, externally adjustable pressure control, pressure gauge and automatic cycle control. Two-hand…

For use with 7881L60 and L65 Cylinders, of corresponding size

A set of square hardened steel dry pressing die for pellet presses, ready for you to make square pellets.

Fluid pan for use with all Test Cylinder Outfits. When presses are used for fluid extraction, filter papers sandwich the sample. The stainless steel pan captures the release fluid.

The press allows the pan to be sealed very easily. Under the pressure of the plunger the pan is cold welded hermetically with the lid.

Manual Pellet Press model 4350 4” platen 5.1” ram stroke 10.25 x 8 inch footprint Compact 12-ton pellet press is perfectly suited for KBr pellet pressing. Includes integral safety shield, buffer plate, 13-mm evacuable die and alignment. Dimensions: 10.25”W x 8” D x…

For Model “C” and Mini “C” Presses Provides protection from accidentally ejected test cylinder or sample Back and side walls are 10-gauge steel Hinged door is polycarbonate, 5 mm Mounts easily on press Only required on older Carver presses. Included…

Permits off-line testing of pellet and tablet samples Holder works with standard BB2 production tooling in the Model C press. The set includes an anodized aluminum holding fixture, steel shims to adjust for various size samples and an anodized aluminum ejector.

Analog Gauges for 12 Ton Models, Model C and Mini C Manual Presses.

This bench top easy-to-operate press allows creation of the highest quality KBr pellets. It is used with the Evacuable KBr die to prepare high quality 13 mm pellets. Requires, but does not include the Evacuable KBr Die (51001144), the KBr Pellet Holder (04810949), and the Adjustable Adapter (L1060351).

Get started with a Specac Starter Kit or Sample Pack. We provide off-the-shelf solutions for a range of infrared spectroscopy sampling needs. We also provide a premium-quality Vacuum Pump System and individual Baseplates. Includes a 2 Ton Manual Press, Pestle + Mortar, 50g tub of KBr…

Form pellets for use in IR and X-ray spectroscopy Stainless steel die includes a fitting for vacuum source connection.

Ai HandPress swing-away heated press has a top heat platen that can easily be moved away from the lower platen. It features dual built-in digital thermometers and heaters, allowing you to precisely control the temperature of your transfer. The digital timer will automatically begin a countdown as…

7mm Die Set for Quick Press

Used to crimp covers on standard DSC pans of aluminum, gold and copper. Design incorporates a replaceable crimper head.

Replacement Lower Die for Sealer

Evacuable Pellet Press Dies for high quality spectroscopy pellets Specac manufactures a wide range of high-quality Atlas Series Evacuable Pellet Press Dies, suitable for compacting powdered samples into discs or briquettes. Specac's Evacuable Pellet Dies produce circular pellets in sizes…

Circular paper rings to reinforce your KBr disks are available. If the amount of sample is limited there are also papermicroframes which reduce the size of the pellet to 11 x 2 mm.

The quick press consists of a handpress, a 7mm die set, and a metal collar. Micropellets can be prepared in the quick press by purchasing the optional 3mm or 1mm die. The KBr pellet is formed in a metal collar that fits into an adjustable pellet holder.

Evacuable Pellet Press Dies for high quality spectroscopy pellets Specac manufactures a wide range of high-quality Atlas Series Evacuable Pellet Press Dies, suitable for compacting powdered samples into discs or briquettes. Specac's Evacuable Pellet Dies produce circular pellets in sizes…

Sealing Insert for Standard Aluminum Pans (P/N 02190041).

"6 x 6” platen size Compact and transportable, requiring less than 2/3 the space of the standard “C” Press Safety shield included Daylight opening range is 0.75 to 7 inches Ideal for constricted bench space or glove box applications 12-ton manual, two-column hydraulic…

Hand-operated press Integral safety shield surrounds work area "6 x 6” platen size Daylight opening to 18” Standard presses for molding, concentrating, embossing and bonding materials. A larger version of the mini C (7881L36) with heavier construction and daylight to…

The Ai AirPress 3 x 2" compact pneumatic heat press features dual built-in digital thermometers and heaters, allowing you to precisely control the temperature of your transfer. The digital timer will automatically begin a countdown as soon as the unit is pressed shut and provides an audible…

Sealing Insert for 10µL, 30µL and 50µL Autosampler Sample Pans

This bench top easy-to-operate press allows creation of the highest quality KBr pellets. It is used with the Evacuable KBr die to prepare high quality 13 mm pellets. Requires, but does not include the Evacuable KBr Die (51001144), the KBr Pellet Holder (04810949), and the Adjustable Adapter…

For centering KBr die in Carver Model C Press Hardened tool steel Plate covers bolt hole in head of press and protects against damage to press by plunger or KBr wafer die. It has a diameter of 89 mm with concentric circles of 25 mm, 51 mm and 73 mm diameter. Thickness: 32 mm.

Evacuable Pellet Press Dies for high quality spectroscopy pellets Specac manufactures a wide range of high-quality Atlas Series Evacuable Pellet Press Dies, suitable for compacting powdered samples into discs or briquettes. Specac's Evacuable Pellet Dies produce circular pellets in sizes…

A set of hardened steel dry pressing die for pellet presses, ready for you to make diameter cylinder-shape pellets.