Drum Trucks

Compare Tool

Select up to 3 products

HomeAll Products

Drum Trucks

1 - 32 of 64
Sort
View
Show
  • 500 lb. maximum capacity, evenly distributed load Optional 3rd shelf Shipped KD, boxed, and includes 5" non-marking casters Very economical

  • Meets ASME B56.10 specifications 1,000 lb. lift capacity Remote control, floor lock, and safety screen are standard on all models With a minimally charged battery, unit can be used while recharging Easy to read illuminated battery status voltmeter Applications include: …

  • Safety chain helps secure load 3 positions: 2 wheel, 4 wheel tilt and 4 wheel storage Easy conversion between all 3 modes using springloaded position lock mechanism 8" moldon rubber wheels, 3" swivel casters Holds cylinders up to 9 1/4" diameter Noseplate 16 7/8"…

  • Oversized 63" long by 32" wide table top accommodates large cargo Two locking swivel casters - 5" x 1½" moldon polyurethane Two 5" x 1½" moldon polyurethane casters Handle height - 38" Hydraulic foot pump Safety bars

  • The pallet leveler progressively lowers as pallet is loaded and raises as pallet is unloaded. 3 Heavy duty calibrated springs used in combination according to desired load range Bearing supported carousel for easy turning Built in fork pockets for ease of transport Helps reduce…

  • 330 lb. maximum capacity, evenly distributed load Shipped KD, boxed, and includes 5" non-marking casters Value priced.

  • 3" nylon load (WHL-2) and 8" nylon steering (WHL-1) wheels 304 stainless steel construction, except for 316 stainless forks

  • This is the ideal platform cart to move chemicals, carboys, computer paper, filing boxes, and scientific equipment - Easy rolling. Eliminates lifting required by high-shelf carts.  Weighs only 20 pounds, but handles up to 265 pounds. Large nonskid platform (17-3/4 x 25-1/2 inches)…

  • This combination drum hand truck/cradle allows one man to load, transport, and drain 55 or 30 gallon drums Equipped with (4) non-sparking rollers on the frame that allow drum spigot to be rotated into position for dispensing All four moldon rubber wheels support the weight of drum for…

  • Simple and affordable Up to 700 lbs. capacity 10" wheels Same strong frames used on Wesco 100 series industrial truck U.S. Patent 5,118,124 Noseplate 7 GA. 8" D x 14" W. The Touch-N-Tilt® ergonomic feature is an innovative, state of the art device that allows…

  • Heavy duty 12 gauge steel reinforced welded construction Constructed for both standard corner or diamond caster mounting pattern Removable two cross-brace handle can be inserted in either end 32" High handles Caster set contains 2 swivel and 2 rigid casters NOTE: Casters are not…

  • Folds to compact sizes for easy storage Lightweight fold-up aluminum hand truck holds up to 220 lbs. Made from an aluminum alloy, the truck weighs 15 lbs. making it easy to maneuver.

  • Four wheel design enables user to quickly and easily load and unload drums from pallet Rear 6" wheels stabilize load for effortless transport. Self-storing chime hook Cast iron center mold on rubber front and rear wheels on 15BT with Kickstand and 16.25" at nose …

  • Fixed handle Chrome plated handle and foot pedal Lever release handle 5" x 1.5" moldon polyurethane wheels with locking swivel casters Foot operated pump

  • Continuous handle with curved back design. Welded frame construction. 1" O.D. tube.

  • Two Models Uni – straight frame – accepts dolly option for 4-wheel support Fold – upper handle angle can be adjusted. Best for copiers, safes, heavy motors or any short and heavy load which would require the user to pull the load back to a very low position. The…

  • Value priced truck Aluminum construction 3 Positions: Vertical - 2 wheel 45° - 4 wheel Platform - 4 wheel 18" x 7.5" cast aluminum noseplate 7.5" W x 27" L recessed folding nose extension Handle height 48" …

  • Front tip of nose plate touches floor Foot operated hydraulic pump raises platform, foot release lowers platform Wheel lock standard All 54" lifts are 60.5" O.A.H. 8"x2" wheels with .75" ball bearings.

  • Foot operated hydraulic pump raises platform, foot release lowers platform Platform sits 5.75" above the floor Wheel lock standard All 54" lifts are 60.5" O.A.H. 8"x2" wheels with .75" ball bearings 3.5" diameter polyurethane ball bearing…

  • Industrial strength heavy duty schedule 40 pipe frame construction Ribbed cross braces for extra strength All joints double welded 8" deep by 14" wide nose is 7 gauge thick plate with machined beveled edge and radiused corners for safety Zinc plated Auto-Loc® axles…

  • Patented design. Long belt allows truck to handle all steel, fiber and poly drums Recommended primarily for handling of overpacks with 1,000 lb capacity Replaceable 'feet' and belt. Floating axle reduces effort required to break over and balance load For 85 gallon overpack poly and…

  • U.S. Pat. No. 7,137,464 1/2 Horsepower, 50 amp, high torque motor runs cooler under load Industrial grade gear box transmits steady power and is preferable to other drive designs Large 2" diameter, polyurethane lifting feet provide more secure stair gripping Auto rewind…

  • Rubber bumpers Made of a strong aluminum alloy, this fold-up cart can hold up to 330 lbs.  Platform can extend from 18” to 25 1/2” in length, width is 16” and weight is 18 lbs. Supplied bungee cord secures load from slipping.

  • 1/4" reinforced steel top and base 2 rigid and 2 swivel 5" diameter steel wheels and 1 floor lock Precision telescoping guide tubes.

  • 2 year pump warranty Weighing accuracy ±0.22 lbs., or 3.5 oz. LED display scale Mettler Toledo Hawk scale/sensor UL approved scale operates on rechargeable battery. May be plugged into AC and used while recharging. Self-contained battery charger Three position…

  • Features: New 11" lowered height models Folding handle lays flat on table top Chrome plated handle and foot pedal Lever release handle Moldon polyurethane wheels with locking swivel casters Foot operated pump

  • 1000 lb lift capacity Floor locks, safety screen and foot guard are standard on all models Front phenolic wheels are 5" diameter Rear phenolic swivel casters are 4" diameter Hydraulic jack manufactured by WESCO in U.S.A. 24" x 24" heavy gauge platform with…

  • WESCO manufactured hydraulic Pedalift Jack, over 35 years of proven quality Available 304 stainless steel construction: 8" x 2" polyurethane tread on polypropylene hub with 304 stainless 3/4" ball bearing 304 stainless hydraulic jack 304 stainless swivel casters with…

  • 1 year pump warranty Moldon polyurethane wheels 180º steering arc Loop handles with inside hand control Closed pallets must be placed on top of forks 6 1/2" wide forks 6" moldon polyurethane steering wheels 3" moldon polyurethane load wheels

  • 1,100 lb. capacity legs extended; 650 lb. capacity legs retracted Ergonomic solution for lifting, transporting, and placing drums on spill pallets. No need for the operator to touch the drum to raise, transport and lower 1,100 lb capacity hydraulic jack for lifting steel, poly and…

  • Ergonomic European style handle Corner bumpers

  • Wesco's Stability Advantage. By design, Wesco casters are mounted past the dolly and drum rim. Our casters are mounted further apart than standard designs with casters completely underneath the drum and closer together. The further the casters are apart the greater the stability. Welded…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.