Hoods

Compare Tool

Select up to 3 products

1 - 32 of 116
Sort
View
Show

Attention Thomas Scientific Customers

Due to current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

  • Protector® Premier® Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance…

  • Simpler to use, Safer to operate Erlab’s Captair Smart ductless fume hoods are designed with advanced carbon filtration, Flex Technology and a simple, innovative way to keep you safe. With Erlab’s unique validation process, safety is guaranteed and chemical exposure is eliminated…

  • Protector standard storage cabinet features 18 gauge steel exterior sidewalls that are epoxy-coated for chemical resistance. Cabinets feature two non-locking manual doors. Four individual leveling feet allow users to make adjustments to level the cabinet based on the condition of their floors.…

  • Labconco offers a variety of accessories to customize your Biosafety Cabinet, Procedure Station, Clean Bench or Filtered PCR Enclosure. Thomas No. 1197K28 Ultraviolet Lamp Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+ Biosafety…

  • Compact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters…

  • Frame Measures: 36" x 38" Chamfered Ends Rods are corrosion-resistant

  • The patented Protector ClassMate Laboratory Hood is designed to meet the needs of instructional laboratories. Clear back and sides and taller front viewing window provide enhanced visibility for conducting chemistry demonstrations or observing students using the hood. The clear back also does not…

  • Low airflow alarm, 100 f/m face velocity, Self securing hinged door panels, brushless and sparkless centrifugal fan, clear acrylic side panels for viewing, patented “Easy-Clamp” that totally eliminates any by-pass leakage, FILTRETE electrostatic pre-filter, 110-130VAC 60HZ OR 230VAC 50HZ

  • Conversion Kit for 4'-8' Protector XL Floor-Mounted Fume Hood ceiling enclosure kit (sold separately). 3-Sided Ceiling Enclosure Kits include 3 glacier white powder-coated steel panels (front & 2 sides) that extend from top of hood to ceiling to hide ductwork, plumbing & wiring. 1EA.

  • Protector XL Floor-Mounted (Walk-In) Laboratory Hoods have panel liners that may be constructed of a variety of corrosion-resistant materials and supplied in three depths to meet individual installation and application requirements. They are suitable for general chemistry applications and…

  • The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than…

  • The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …

  • Simpler to use, Safer to operate Erlab’s Captair Smart filtered storage cabinets are designed with advanced carbon filtration, Flex Technology and a simple, innovative way to keep you safe. With the push of one button, it will set you free of limitations in order to focus on what is…

  • This fume hood features a one-piece shell molded of polyethylene plastic with a flat internal baffle and a clear acrylic sash that slides on inside tracks. Internal baffle across the rear of the shell slopes forward, leaving space beneath for air flow to sweep the deck, and space above in…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • The Purifier Axiom Class II, Type C1 is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of composite resin, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • High Performance Chemical Fume Hoods   The expansive interior is enhanced by a 43" tall sight line with a 17" in high glass observation panel. Includes frameless vertical rising sash with a 24" clear sash opening. This hood has easy conversion from CAV to VAV use. Includes…

  • If you have robust chemical applications requiring a fume hood but have low ceiling height and no means to duct to the outside, consider the Protector® Airo™ Filtered Fume Hood. Labconco has combined its patented* fully-featured, containment- enhancing Protector® Hood design with…

  • UniFlow LE Airestream fume hoods are a high-efficiency, full duty, low flow constant volume for energy savings & maximum user protection. The aerodynamic face opening with airfoil provides uniform air flow through the fume chamber. The Vector baffle system directs the air through the fume…

  • Face velocities from 60 to 100 fpm Built-in dynamically-balanced motorized impeller Speed controlled to achieve desired inflow velocity Protector Work Stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a…

  • The Universal Fume Hood is designed for light to medium duty fume removal, and offers such features as a sturdy dual wall construction, and a fully vertical sliding sash. It is completely molded of fire retardant fiberglass. Thomas Numbers 1167M01-M04: Units do not have a blower and require a…

  • The Purifier Axiom Class II, Type C1 is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • HEPA Filter Pack. High Efficiency Particulate Air Filter for non-radioactive particulate applications. Rated for 1000 CFM airflow with initial 1.0" static pressure drop. Replaceable HEPA filter media removes 99.97% of all particulates 0.3 micron or greater. Includes clamping frame and duct…

  • Fume Adsorbers

    Labconco

    Traps solvent vapors Fume Adsorber is designed for histology cover slipping and staining areas and uses activated carbon media to adsorb annoying odors and noxious vapors such as xylene and toluene. Solvent vapors are trapped in the capillary-like channels of the carbon filter while clean air is…

  • Standard or extra height models 2-, 3- or 4-feet wide Protector XVS Ventilation Station provides user protection by keeping powders and fumes contained during light duty, fume-generating or weighing procedures. Patented features include air foil with Clean-Sweep openings to enhance airflow and…

  • Frame Measures: 36" x 38" x 9" Chamfered Ends Rods are corrosion-resistant

  • The MicroFlow I Workstation is ideal for: A Class 1 ductless hood workstation. Activated Carbon Filtration for fumes, odors, and non-hazardous chemical vapors, pre-filter for particulate. Completely self contained with clear hood surround with safety viewing sash for user Integral work…

  • Sash stop kit

    Labconco

    Sash Stop Kit. Restricts how far a vertical-rising sash may be opened. Compatible with Protector Xstream and Premier Fume Hoods

  • SpillStopper Work Surfaces are compatible with Protector (Premier or XStream) Laboratory Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory…

  • Organic Carbon Filter, Type AC. Contains 12 pounds of granular activated carbon media suitable for organic solvents including acetone, ethyl acetate, toluene and xylene. Carbon-based filters used in a variety of Labconco enclosures require periodic replacement.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.