Exhaust Hood

Compare Tool

Select up to 3 products

Exhaust Hood
1 - 32 of 85
Sort
View
Show


  • Fume Hood Exhaust Blowers

    Hemco

    Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.

  • Sciencware® Tapered Rear Exhaust Fume Hoods

    Bel-Art - SP Scienceware

    …Tanks and Vats These polypropylene exhaust hoods are intended to rest on the rear edge of a tank and draw a stream of air across the top of the tank, away from the operator. An exhaust system is required. Formula for calculating required airflow for hood: 1.833 x 150 = 274.95 CFM. Service…

  • Exhaust Dampers

    Labconco

    …to maintain proper airflow for remote blower or house exhaust systems. 1' equivalent resistance. 5165J25, 0516E55, 0516E98, 0516E97 & 0516G13: PVC Manual Duct Dampers allows you to balance airflow. Used with exhaust and auxiliary-air ducts, and is usually placed directly above the fume hood.

  • Exhaust Transition Adapters

    Labconco

    …Enclosure, Protector XVS Ventilation Station, Protector Work Station or Protector Demonstration Hood attached to the FilterMate Portable Exhauster. For downward hose routing. Upper Exhaust Transition Adapters are epoxy-coated steel, 2" x 10" rectangular to 5" or 6" diameter round for connection…

  • Flexible Exhaust Duct, 42" length

    Labconco

    42" length of 2" diameter steel-reinforced vinyl duct with two clamps.

  • Flexible Exhaust Duct, 10' length

    Labconco

    10' length of 2" diameter steel-reinforced vinyl duct with 2 clamps.

  • Techni-Dome® 360 Fume Hood

    Bel-Art - SP Scienceware

    The Techni-Dome® Fume Hood has a 50cm (20") ID and 45cm (18") height, making it ideal for simple micropipetting processes, blending of chemicals, handling of small biohazard items or interactive museum/educational displays. Compact; fits on crowded benchtops Clear,…

  • Protector XStream Laboratory Hood

    Labconco

    The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than…

  • Scienceware Clear View Fume Hood

    Bel-Art - SP Scienceware

    Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions 6" OD vent…

  • Scienceware Clear View Fume Hood

    Bel-Art - SP Scienceware

    Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions One 6” OD vent…

  • Scienceware® Large Molded Fume Hood

    Bel-Art - SP Scienceware

    This fume hood features a one-piece shell molded of polyethylene plastic with a clear acrylic sash that slides on inside tracks. Sash can be set in an open, closed or intermediate position; remains open slightly when in closed position to facilitate continuous air flow Front opening is 88…

  • Fume Hood for SPB 50-72, 100-42

    PerkinElmer

    The fume hood can be connected to an in-house laboratory exhaust system or used with the SPB blower unit (N9308022). Fume hoods come flat packed to save transport costs and can be assembled in minutes without tools.

  • Scienceware® Large Molded Fume Hood with Baffle

    Bel-Art - SP Scienceware

    This fume hood features a one-piece shell molded of polyethylene plastic with a flat internal baffle and a clear acrylic sash that slides on inside tracks. Internal baffle across the rear of the shell slopes forward, leaving space beneath for air flow to sweep the deck, and space above in…

  • Filtermate Portable Exhausters

    Labconco

    …the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters to remove hazardous powders, particulates or vapors from the exhaust air stream, returning…

  • HEPA Exhaust Filter For Cabinet 6' Purifier Logic II Cabinets And 6' Puricare

    Labconco

    Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Applicable products include: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic Biosafety Cabinets and Purifier Logic Biosafety Cabinets with an enclosure nominal width of 6 feet.

  • Fume Hood for SPB 50-24, 50-48, 100-12, 100-30

    PerkinElmer

    …material base, the fume hood eliminates the risk of trace-metal contamination common with traditional fume hoods. HEPA ® filters ensure clean input air. The fume hood can be connected to an in-house laboratory exhaust system or used with the SPB blower unit (N9308022). Fume hoods come flat packed…

  • Ductwork for Protector ClassMate Hoods

    Labconco

    Exhaust adapter for back to back ClassMate Fume Hoods to connect (2) 12" exhaust collar connections to one 12" connection. Constructed of powder-coated steel.

  • Fiberglass Island Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of composite resin, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat resistance.…

  • Fiberglass Wall Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of composite resin, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat resistance.…

  • Combination Hooded Kjeldahl Apparatus

    Labconco

    Hooded Combination Kjeldahl units enclose the distillation and digestion apparatus so that process heat may be contained and vented from the laboratory. The hood surrounding the apparatus includes three collars: one for remotely-located exhaust blower connection, one for acid fume exhaust manifold…

  • Universal Fume Hoods

    Hemco

    The Universal Fume Hood is designed for light to medium duty fume removal, and offers such features as a sturdy dual wall construction, and a fully vertical sliding sash. It is completely molded of fire retardant fiberglass. Thomas Numbers 1167M01-M04: Units do not have a blower and require a…

  • Protector® Premier® Laboratory Hoods

    Labconco

    …the Protector XStream Hoods, Protector Premier Hoods incorporate many containment-enhancing features including Clean-Sweep™ technology and the Eco-Foil™ air foil. Testing confirms the Protector Premier Hood meets the SEFA-1 standard of a low velocity, high performance hood and may be operated as…

  • Fiberglass 30 Laboratory Hoods

    Labconco

    … Fiberglass 30 Laboratory Hoods are suitable for general chemistry applications. Explosion-proof models are available for applications involving high concentrations of flammable solvents. Choose from hoods designed to be used with a remotely-located blower or hoods that include a built-in blower.…

  • Stainless Steel Island Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • Stainless Steel Wall Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • Floor-Standing Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • 6' Protector Pass-Through Laboratory Hoods

    Labconco

    Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • 5' Protector Pass-Through Laboratory Hoods

    Labconco

    Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • 4' Protector Pass-Through Laboratory Hoods

    Labconco

    Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Protector ClassMate Laboratory Fume Hoods

    Labconco

    …the hood. The clear back also does not obstruct visibility when hoods are placed back-to-back in an island configuration. Fully-featured with baffle and air foil, this by-pass hood maintains safe airflow while the restricted sash opening conserves energy. The Protector ClassMate Hood is…

  • Protector XL Benchtop Laboratory Hoods

    Labconco

    The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …

  • Protector XL Floor-Mounted Fume Hoods

    Labconco

    …ID exhaust connection(s) ETL listed Options 4', 5', 6', 8', 10’, 12’, 16’ widths Interior depths of 30”, 36” and 48” Rear Finish Panel Kits Glacier white powder-coated steel panel hides hood's interior…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.