Chemical Fume Hoods

Compare Tool

Select up to 3 products

HomeAll Products

Hoods Chemical Fume Hoods

1 - 32 of 101
Sort
View
Show
  • Back Mount Lab-Frame Kits for Fume Hoods

    Lee Engineering

    Frame Measures: 36" x 38" Chamfered Ends Rods are corrosion-resistant

  • Stainless Steel Island Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • Fume Hood Exhaust Blowers

    Hemco

    Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.

  • Biosafety Cabinet & Clean Bench Accessories

    Labconco

    Labconco offers a variety of accessories to customize your Biosafety Cabinet, Procedure Station, Clean Bench or Filtered PCR Enclosure. Thomas No. 1197K28 Ultraviolet Lamp Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+ Biosafety…

  • Side & Bottom Lab-Frame Kits for Fume Hoods

    Lee Engineering

    4' Frame Measures: 36" x 38" 6' Frame Measures: 36" x 62" 8' Frame Measures: 36" x 86" Chamfered Ends Rods are corrosion-resistant

  • Protector Work Stations

    Labconco

    Face velocities from 60 to 100 fpm Built-in dynamically-balanced motorized impeller Speed controlled to achieve desired inflow velocity Protector Work Stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a…

  • Guardian™ Airflow Monitors

    Labconco

    Guardian™ Airflow Monitor senses and alerts the operator to low airflow conditions. From the monitor's face plate, the user can easily select and calibrate a set point between 30 and 250 fpm using a velocity meter and a screwdriver. Audible/visual alarm. Includes night setback, external alarm and…

  • 4' Protector Echo Filtered Fume Hoods

    Labconco

    Protector Echo Filtered Fume Hoods with Neutrodine filtration are appropriate for procedures that require personnel protection in a lab that cannot accomodate duct work nor make-up air. Labconco has combined its patented fully-featured, containment-enhancing Protector® Hood design…

  • Purifier Cell Logic+ Class II B2 Biosafety Cabinets

    Labconco

    The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest,…

  • Purifier® 6' Axiom™ Class II, Type C1 BioSafety Cabinets with 10" Sash

    Labconco

    The Purifier Axiom Class II, Type C1 is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

  • Purifier® 6' Axiom™ Class II, Type C1 BioSafety Cabinets with 8" Sash

    Labconco

    The Purifier Axiom Class II, Type C1 is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

  • Neutrodine Molecular Filters

    Labconco

    Neutrodine molecular carbon filter unit for multi-purpose use of acids/bases/solvents, separated or combined.

  • Scienceware® Large Molded Fume Hood

    Bel-Art Products

    This fume hood features a one-piece shell molded of polyethylene plastic with a clear acrylic sash that slides on inside tracks. Sash can be set in an open, closed or intermediate position; remains open slightly when in closed position to facilitate continuous air flow Front opening is…

  • Purifier Logic+ Class II B2 Biosafety Cabinets

    Labconco

    The Purifier Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest, fully…

  • Fume Adsorbers

    Labconco

    Traps solvent vapors Fume Adsorber is designed for histology cover slipping and staining areas and uses activated carbon media to adsorb annoying odors and noxious vapors such as xylene and toluene. Solvent vapors are trapped in the capillary-like channels of the carbon filter while clean air is…

  • XPert Balance Enclosure Stations

    Labconco

    XPert Filtered Balance Stations are designed to protect the user during powder weighing operations. Ducting to an outside blower is required. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal…

  • Stainless Steel Work Surfaces

    Labconco

    Type 304 stainless steel work surfaces have a 1" deep front spill trough and fit dimensions of Xpert Systems and Stations.

  • 8' Protector Echo Filtered Fume Hoods

    Labconco

    Protector Echo Filtered Fume Hoods with Neutrodine filtration are appropriate for procedures that require personnel protection in a lab that cannot accomodate duct work nor make-up air. Labconco has combined its patented fully-featured, containment-enhancing Protector® Hood design…

  • Protector Storage Cabinets and Shelf Kits

    Labconco

    Protector standard storage cabinet features 18 gauge steel exterior sidewalls that are epoxy-coated for chemical resistance. Cabinets feature two non-locking manual doors. Four individual leveling feet allow users to make adjustments to level the cabinet based on the condition of their floors.…

  • Protector Filtermate

    Labconco

    Require no outside ducting Non-sparking motor/blower Foot operated on/off switch Durable construction Hard rubber casters Adjustable blower speed An accessory to the Protector® VS™ Ventilation Station, the Filtermate filters the contaminated air generated and returns purified air to the…

  • Scienceware Clear View Fume Hood

    Bel-Art Products

    Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions 6" OD vent…

  • Accessories & Replacement Parts for Protector Echo Filtered Fume Hoods

    Labconco

    gGuard® Communication Software Automatically collects and records hood data, alerts and alarms on a customer-supplied personal computer Monitors, manages and provides data via email to a designated facility manager Provides access to the following: usage authorization, filter…

  • Scienceware® Large Molded Fume Hood with Baffle

    Bel-Art Products

    This fume hood features a one-piece shell molded of polyethylene plastic with a flat internal baffle and a clear acrylic sash that slides on inside tracks. Internal baffle across the rear of the shell slopes forward, leaving space beneath for air flow to sweep the deck, and space above in…

  • Halo Smart Laboratory Air Filtration System

    Erlab

    Healthier, cleaner air in your laboratory Halo Smart is a ceiling mounted laboratory grade air filtration system working to purify the air from fugitive emissions present in the lab, while also providing real-time communication with the lab manager and users, of the air pollution levels and…

  • Solid Epoxy Work Surfaces

    Labconco

    Black chemical-resistant work surface is contoured to fit the dimensions of the enclosure and to contain spills. These surfaces can be used with Protector XVS Ventilation Stations, Protector Work Stations, Purifier Non-Ventilated PCR Enclosures and Tissue Culture Enclosures.

  • Fiberglass Island Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of composite resin, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • Purifier® 4' Axiom™ Class II, Type C1 BioSafety Cabinets with 10" Sash

    Labconco

    The Purifier Axiom Class II, Type C1 is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

  • Filtermate Portable Exhausters

    Labconco

    Compact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters…

  • Protector XL Benchtop Laboratory Hoods

    Labconco

    The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …

  • Phenolic Work Surfaces

    Hemco

    Flat phenolic work surface for Universal and Clean Aire II hoods.

  • Intelli-Sense™ Multi-Speed PVC Blowers

    Labconco

    Handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid Intelli-Sense Multi-Speed Blowers are weatherized, direct drive, non-explosion-proof blowers controlled by a two or three position switch. Each blower has a reliable electronically commutated motor…

  • Organic Filter Cell

    Labconco

    Organic Carbon Filter, Type AC. Contains 12 pounds of granular activated carbon media suitable for organic solvents including acetone, ethyl acetate, toluene and xylene. Carbon-based filters used in a variety of Labconco enclosures require periodic replacement.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.