Benchtop Fume Hoods

…hood. The clear back also does not obstruct visibility when hoods are placed back-to-back in an island configuration. Fully-featured with baffle and air foil, this by-pass hood maintains safe airflow while the restricted sash opening conserves energy. The Protector ClassMate Hood is benchtop…

The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …

Base cabinets built to last! UniLine Fume Hood Base Cabinets are constructed of top grade furniture steel and finished in a chemical resistant powder coated finish meeting or exceeding SEFA 8 recommended practice for laboratory casework. UniLine Base Cabinets set the standard for safety and…

…2 wings & mounting hardware For use with Protector Echo Benchtop and Floor-Mounted Filtered Fume Hoods RFID User Card* Required to operate the fume hood The memory system of the hood tracks user fume hood time usage Can turn lights and fans on and off Must have…

Compact, benchtop Fiberglass 30 Laboratory Hoods are designed for research, educational and clinical applications requiring small working space and efficient fume removal. The fiberglass liner is corrosion-resistant, durable, fire-resistant and light reflective. The smooth one-piece molded…

…material base, the fume hood eliminates the risk of trace-metal contamination common with traditional fume hoods. HEPA ® filters ensure clean input air. The fume hood can be connected to an in-house laboratory exhaust system or used with the SPB blower unit (N9308022). Fume hoods come flat packed…

…job site by mechanical trades. Bench Fume Hood Work Surfaces are 1 1/4" thick modified black epoxy resin work surfaces are required for all bench hoods and are dished to retain spills. Cup sinks are sold separately. Bench Fume Hood Adjustable Height Ceiling Enclosures are three…

Provides horizontal laminar flow of Class 100 air; flow rate 40 to 100 fpm (0.2 to 0.6 m 3 /s) Solid state speed control, permanently lubricated, 1/3 hp (249 W) motor which is internally protected against thermal overload and balanced, direct drive blower Meets Federal Standard 209-B Prefilter is…

…value and set point on two-line display Front panel indicates output and alarm conditions Grid support bracket ideal for fume hood mounting The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control…

…- dimmable directly over pipette tips Improved programmability by adding extra commands and 4x memory Compact, will easily fit into a fume hood Lightweight, only 22 pounds Two year warranty Displense/Aspirate Easily move the pipette head with a light touch on the handle.…

…operator to set fuming cycle time and relative humidity levels between 50-80%. Using the CA Series is simple; position the non-porous evidence inside the chamber, add cyanoacrylate to the heating element and push the start button to begin fuming. The evidence technician can set fume cycle time…

Protector Acid Storage Cabinets support all Labconco benchtop fume hoods and safely store and vent acids and other corrosive liquids. Features: two rear vent connection cutouts for venting the cabinet into a fume hood; durable epoxy-coated steel construction; corrosion-resistant polyethylene-lined…

…100 per pack. Feature one long flap for ease in opening Provide a convenient, space saving, disposal unit for use in fume hoods Can be used on benchtops and desks when used with the Poxygrid® desk-size bag holder (sold separately) Bright orange-red bags Made of High Molecular…

Adjustable height accommodates persons sitting or standing Support Protector, Protector XL Benchtop, HOPEC IV. Basic fume hoods, Paramount Ductless Enclosures, Purifier Class I and HEPA Filtered Enclosures, Purifier Clean Benches, PCR Enclosures, Protector XVS Ventilation Station and XPert…

Epoxy Resin Worksurfaces are recommended for general laboratory work where greater chemical resistance is required. Surface is dished 3/8" to contain spillage. Worksurface is cast of thermosetting epoxy resin, creating a molded solid 1-1/4" thick top which is extremely hard, abrasion and…

…Techni-Dome® Fume Hood has a 50cm (20") ID and 45cm (18") height, making it ideal for simple micropipetting processes, blending of chemicals, handling of small biohazard items or interactive museum/educational displays. Compact; fits on crowded benchtops Clear, unrestricted…

Enviralab Benchtop Environmental Air Control Sterility Modules Provide vertical laminar flow of Class 100 air Solid state speed control provides average flow rate of 90 fpm 10 fpm measured 152 mm from diffuser screen Blower has direct-drive, continuous duty and permanently…

…bench Adhesive backed, press-fit Dual Lock™ reclosable fastener can be attached to any flat surface, such as lab equipment, a wall, a fume hood or even the benchtop Works with Sharpie® markers or other similar pens that have a cap with a pocket clip to attach to the penholder well

…Labconco fume hoods including Protector Premier, XStream, ClassMate, Stainless Steel, and PVC; Protector XL Benchtop and HOPEC IV; Basic and Fiberglass 30 Hoods Durable epoxy-coated steel construction Attractive glacier white exterior complements laboratory casework and Labconco fume hoods. …

99.99% efficient HEPA filter Prefilter Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) Minihelic II pressure gauge Double-gasket, negative pressure HEPA filter leak protection Front-mounted light and blower switches Variable speed motor/blower(s) with vibration isolation pads …

…better observation. Typical applications include use for bench protection, table covering to expand work surfaces, liner for fume hoods, apron liner for front of fume hood and creating a splash screen. To remove, simply peel back the film. It will not leave any sticky residue. Aluminum backing is…

…better observation. Typical applications include use for bench protection, table covering to expand work surfaces, liner for fume hoods, apron liner for front of fume hood and creating a splash screen. To remove, simply peel back the film. It will not leave any sticky residue. Vinyl backing is…

…on the benchtop or under the lab hood using Thermo Scientific™ Nalgene™ Safety Waste Funnel Systems. Funnels feature the Easy Snap Safety Latch to minimize spillage if accidentally tipped over and a larger diameter funnel for easy pouring. The vent system helps reduce fumes and splashing…

This cleaner has been specially formulated for use on laboratory surfaces including, stainless steel, stone/composite bench tops and fume hood sashes. This cleaner is intended for removal of stains and residues. It is not intended as a disinfectant. 32 oz Spray Bottle DOT Info: UN1760, Corrosive…

This cleaner has been specially formulated for use on laboratory surfaces including, stainless steel, stone/composite bench tops and fume hood sashes. This cleaner is intended for removal of stains and residues. It is not intended as a disinfectant. 4 oz Spray Bottle DOT Info: UN1760, Corrosive…

The ReversingDigital stirrer maximizes productivity, fits into any area of the laboratory including a fume hood or enclosed workstation, and provides accurate and repeatable results every time. This stirrer also offers a choice of rotation direction - clockwise, counter clockwise or both (agitation…

…addition, its compact footprint means that it can be placed into any fume hood or onto a small bench space. The OS1025 Omni Reaction Station has recently been upgraded to offer greater flexibility and productivity for benchtop chemistry, whilst retaining its rugged controller design. The…

…are equipped with over-sized, sure-grip adjustment knobs for extra leverage and easy height adjustments. Lab-lifts are ideal for use in fume hoods or bench tops and hold a variety of items including glassware, hot plates, baths and magnetic stirrers. 17” Support Rod Kit is ideal…

…with tubes ranging from 2 mL to 50 mL Low profile design and small footprint (only 4.3” wide) save valuable space on a bench top and in fume hoods Rapid vortex action saves time and enables quick mixing of samples Modern design allows easy one handed touch start operation and shaking…

…footprint of the OS6000 series means that they can be placed into any fume hood or onto a small bench space. The OS6000 series Omni Reaction Stations have recently been upgraded to offer greater flexibility and productivity for benchtop chemistry, whilst retaining their rugged controller design. …

The Cryo-Compact refrigerated/heating circulators have a very small footprint which is ideal for placing on bench top or in a fume hood with limited space. Models feature M16x1 male pump connections for external temperature applications with 8 and 12 mm hose barbs. The Economy CF30/CF40 models…

… Variable speed motor controller - mixing action from gentle, low speed shaking to vigorous, high speed shaking Compact - can fit inside a fume hood for added safety Heavy-duty construction - maximum load of up to 20 lbs. Requires no load balancing The built-in clamping shaking…