Laminar Flow Hood

Compare Tool

Select up to 3 products

Laminar Flow Hood
1 - 32 of 70
Sort
View
Show
  • ValuLine™ Dust-Free Hoods

    Terra Universal

    These economical hoods provide a dust-free enclosure for a host of contamination-sensitive operations, including pharmaceutical packaging and weighing, microelectronics assembly and testing, and chemical processing. Modular design lets you specify hood only, or hood with 99.99% efficient HEPA…

  • WhisperFlow™ Vertical Laminar Flow Stations

    Terra Universal

    …You Control Laminar Flow The Vertical Laminar Flow Station comes complete with static-dissipative PVC side panels that restrict the laminar flow and ensure an effective wash of HEPA filtered air over the entire work surface. For additional control of the laminar flow, select the Motorized…

  • 4' SST Horizontal Clean Bench (230V) (26" Deep) UK

    Labconco

    …conformity (115 volt models) ETL listing (115 volt models) CE Conformity marking (230 volt models) Features Horizontal laminar flow Supply HEPA filter, 99.99% efficient on particles 0.3 micron (2 each on 8' models) Double-gasket, negative pressure HEPA filter leak…

  • Benchtop Environmental Air Control

    Envirco

    Provides horizontal laminar flow of Class 100 air; flow rate 40 to 100 fpm (0.2 to 0.6 m 3 /s) Solid state speed control, permanently lubricated, 1/3 hp (249 W) motor which is internally protected against thermal overload and balanced, direct drive blower Meets Federal Standard 209-B Prefilter is…

  • StarFire Bunsen Burner ST

    Argos Technologies

    …ST offers a safe alternative to standard laboratory Bunsen burners. The stainless steel body and compact size make it ideal for use in laminar flow hoods. Unit can be operated with standard house gas or with an integrated gas cartridge (sold separately); includes an added overheating protection…

  • ValuLine™ WhisperFlow™ Polypropylene Laminar Flow Hoods

    Terra Universal

    laminar flow hood gives you a particle-free work environment on any available work surface. FFU: Quiet, Reliable Operation It consists of two modules: a polypropylene hood and a fan/filter unit with HEPA particle filter rated at 99.99% efficient with 0.3 micro particles (order hood and…

  • Erlab Laminar Flow Hoods

    Erlab

    Provides an ultra-clean and dust-free work area Ideal for applications such as non-pathogenic cell cultures,iIn-vitro cultures, microbiology, homeopathic preparations, electronics, and optics. These workstations feature HEPA H14 filters to provide an ISO Class 5 work environment. The HEPA H14…

  • Techni-Dome® 360 Fume Hood

    Bel-Art Products

    The Techni-Dome® Fume Hood has a 50cm (20") ID and 45cm (18") height, making it ideal for simple micropipetting processes, blending of chemicals, handling of small biohazard items or interactive museum/educational displays. Compact; fits on crowded benchtops Clear,…

  • Protector Stainless Steel Perchloric Acid Laboratory Hoods

    Labconco

    Protector Stainless Steel Perchloric Acid Laboratory Hood. Designed specifically for procedures involving the use of perchloric acid. One-piece Type 316 stainless steel liner is free of joints to prevent build-up and simplify decontamination. By-pass airflow design. Built-in washdown system with…

  • ValuLine™ Vertical Laminar Flow Workstations

    Terra Universal

    Terra’s ValuLine™ Workstations provide a low-cost solution for laminar flow applications— HEPA filtration with filter backpressure gauge: internal baffling plates and anodized aluminum diffuser panel ensure uniform air speed across the filter face Tilt-up dissipative PVC…

  • Paramount® Ductless Enclosures

    Labconco

    …applications. No outside ducting is required. Features: Patented slotted rear baffle promotes non-turbulent horizontal laminar flow for safe operation Advanced electronic commutated motor (ECM) technology uses less energy and runs quieter than comparable models …

  • RXPert™ Single Filtered Balance Systems

    Labconco

    …hazardous compounding. They provide user protection by keeping powders and particulates contained during hazardous drug manipulation. These powder hoods include a canopy and damper for thimble ducting the enclosure to the outside. All models feature: Patented* design Deep interior…

  • Benchtop Stainless Steel Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Benchtop Powder Coated Steel Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • PuriCare Vertical Flow Stations

    Labconco

    PuriCare Vertical Flow Stations provide an economical solution to safe cage changing and small animal transfer. Its narrow profile fits easily in crowded colony rooms. It protects the user from exposure to allergens and the animals from environmental and cross contamination. Nominal downflow…

  • WhisperFlow® Laminar Fan/Filter Units (FFUs)

    Terra Universal

    These reliable, self-powered Fan/Filter Units provide a uniform flow of microfiltered air to meet cleanliness standards down to Class 10 (ISO 4). All models use a 3-setting (hi/med/lo), centrifugal-type fan/motor with permanently lubricated bearings mounted inside a white powder-coated steel…

  • Guardian 1000 Airflow Monitor 115 volts/60 Hz

    Labconco

    …may be mounted atop the enclosure in factory-prepared location. LCD displays actual face velocity within the hood. Audible and visual alarms indicate when velocity of the hood falls below set point. Includes airflow sensor, face plate with circuit board, epoxy-coated steel housing, electrical…

  • Poxygrid® "Half-Size" Test Tube Racks

    Bel-Art Products

    Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …

  • Protector Stainless Steel Radioisotope Laboratory Hoods

    Labconco

    Protector Stainless Steel Radioisotope Laboratory Hood. Provides protection from applications requiring the use of radiochemicals. Seamless type 304 stainless steel liner with integral work surface.

  • Canopy Hoods

    Labconco

    Designed to vent non-toxic materials such as heat, steam and odors from large or bulky apparatus such as ovens, steam baths and autoclaves, wall-mounted or suspended from the ceiling, built-in baffle to increase air velocities and enhance its overall capture efficiency, glacier white epoxy-coated…

  • Benchtop Polypropylene Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Basic 47 & Basic 70 Fume Hoods

    Labconco

    Hoods with Blower Modules). Basic 47 Hoods can be used as an individual work stations. Hoods with blower module are capable of overcoming a maximum external static pressure of .25" H2O at 720 CFM (100 fpm). Static pressure loss does not exceed .35" H2O at 100 fpm (720 CFM) for hoods

  • Floor-Standing Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Scienceware® No-Wire™ Test Tube Half Racks

    Bel-Art Products

    Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")

  • GeneClean® for Ancient DNA Kit

    MP Biomedicals

    …and animal by-products. Special attention has been paid to the production of the reagents of this kit in order to minimize the possibility of contamination by contemporary DNA of extraneous sources. All solutions are prepared from ultrapure reagents and dispensed in a dedicated laminar flow hood.

  • Low Particulate/Low Metals Bottles

    Thermo Scientific Nalgene

    …bottles with a particle level of less than 20 particles per ml at 0.3µm and greater Each bottle is double bagged under Class 10 laminar flow hoods inside a Class 100 clean room Excellent for storing high-purity chemicals Product includes a certificate of quality that assures…

  • Polyethersulfone Stericup-VP Bottletop Radio-Sterilized Filter Units

    MilliporeSigma

    …compact profile improve stability during filtration, make gripping the receiver easier, and make Stericup Filter Units ideal for use in laminar flow hoods. ?? As an added convenience, the bottom of the receiver flask is slightly recessed, enabling capped flasks to be stacked for convenient storage.

  • PVDF Hydrophilic Stericup-HV Bottletop Radio-Sterilized Filter Units

    MilliporeSigma

    …compact profile improve stability during filtration, make gripping the receiver easier, and make Stericup Filter Units ideal for use in laminar flow hoods. ?? As an added convenience, the bottom of the receiver flask is slightly recessed, enabling capped flasks to be stacked for convenient storage.

  • Scienceware® Flowmi™ Cell Strainers

    Bel-Art Products

    …sterility when used in a laminar flow hood or biohazard hood. Patent pending. Preserves volume when filtering small sample volumes Removes cell aggregates and creates uniform single cell suspensions Decreases the potential for clogging of FLOW or FACS* instruments by effectively…

  • Vacuum Aspirator 1.0gal

    Bel-Art Products

    …and epoxy coated steel frame Will not crowd workspace, fume hood, or laminar flow hood Quickly and conveniently aspirate and collect fluids using a vacuum source Holds 3200ml (108oz) and the included trap prevents fluid flow into the vacuum source Use to aspirate media, waste…

  • Tissue Culture Pipet-Aid

    Drummond

    …be used with glass or plastic pipet including Pasteur, serological and transfer in sizes from 1 to 100 mL Useful in confined areas such as a laminar flow hood Hose and handle components are completely autoclavable and resistant to most laboratory reagents Check valve protects against accidental…

  • Contec Sterile 70% Isopropanol

    Contec

    …included trigger sprayer is packaged separately with each induction sealed bottle. Applications Wipedown of isolators, cabinets, laminar flow hoods and surfaces Use on gloved hands in sterile suites Wipe down of products and equipment for pass through to controlled environments Ideally…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.