Laboratory Fume Hood

Compare Tool

Select up to 3 products

Laboratory Fume Hood
1 - 32 of 124
Sort
View
Show


  • …at 100 fpm (1120 CFM) for hoods without blower module. Dimensions: 70" W x 25" D x 53" H. A water gauge is used for static pressure measurements. Four inches of water is approximately equal to one inch of mercury. Labconco XPress Laboratory Equipment Thomas number…

  • Simpler to use, Safer to operate Erlab’s Captair Smart ductless fume hoods are designed with advanced carbon filtration, Flex Technology and a simple, innovative way to keep you safe. With Erlab’s unique validation process, safety is guaranteed and chemical exposure is eliminated…

  • Scienceware Clear View Fume Hood

    Bel-Art - SP Scienceware

    Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions …

  • The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than…

  • Protector PVC Acid Digestion Laboratory Hood. 37.7" deep. Features heat-welded unplasticized PVC liner, built-in washdown system, integral work surface, drainage trough and 3-16" thick tempered safety glass vertical-rising sash with frame of powder-coated aluminum and PVC (glass is suitable for…

  • Protector Premier I-S Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire…

  • …access to plumbing and electrical wiring Compliance SEFA 1-2002 (Laboratory Fume Hoods) ASHRAE 110-95 (Method of Testing Performance of Laboratory Fume Hoods) ANSI Z9.5-1993 (Laboratory Ventilation) UL 3101-1/61010-1 CAN/CSA C22.2 No. 1010.1 Required…

  • Compact, benchtop Fiberglass 30 Laboratory Hoods are designed for research, educational and clinical applications requiring small working space and efficient fume removal. The fiberglass liner is corrosion-resistant, durable, fire-resistant and light reflective. The smooth one-piece molded…

  • Scienceware Clear View Fume Hood

    Bel-Art - SP Scienceware

    Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions 6" OD vent…

  • The Protector XStream I-S Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream I-S easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than 0.05 ppm leak rate…

  • …of solvent and acid fumes, laboratory air quality, sash position and temperature, audio/visual alarms, and intelligent filter indication of type and status to prevent saturated filters being re-installed. The control box is conveniently located on the front of the hood and can be controlled…

  • …2-prong construction Single or dual adjust Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest fume hoods. Clamps are constructed with round extension arms, which allow the clamps to be rotated…

  • Protector® Premier® Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and…

  • The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …

  • …material base, the fume hood eliminates the risk of trace-metal contamination common with traditional fume hoods. HEPA ® filters ensure clean input air. The fume hood can be connected to an in-house laboratory exhaust system or used with the SPB blower unit (N9308022). Fume hoods come flat packed…

  • Protector Stainless Steel Perchloric Acid Laboratory Hood. Designed specifically for procedures involving the use of perchloric acid. One-piece Type 316 stainless steel liner is free of joints to prevent build-up and simplify decontamination. By-pass airflow design. Built-in washdown system with…

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Protector Stainless Steel Radioisotope Laboratory Hood. Provides protection from applications requiring the use of radiochemicals. Seamless type 304 stainless steel liner with integral work surface.

  • Protector XL Floor-Mounted (Walk-In) Laboratory Hoods have panel liners that may be constructed of a variety of corrosion-resistant materials and supplied in three depths to meet individual installation and application requirements. They are suitable for general chemistry applications and…

  • …through the fume chamber. The Vector baffle system directs the air through the fume chamber to the bell shaped exhaust collar with minimum turbulence. The fume hood has a non-metallic construction (NO RUST) for total chemical resistance, superior durability and long life. Fume hood is U.L.1805…

  • …UniLine Fume Hood Base Cabinets are constructed of top grade furniture steel and finished in a chemical resistant powder coated finish meeting or exceeding SEFA 8 recommended practice for laboratory casework. UniLine Base Cabinets set the standard for safety and durability in showplace laboratories.

  • …of solvent and acid fumes, laboratory air quality, sash position and temperature, audio/visual alarms, and intelligent filter indication of type and status to prevent saturated filters being re-installed. The control box is conveniently located on the front of the hood and can be controlled…

  • …are self-contained work stations (ductless fume hoods) that use carbon filters to rid the laboratory or unsafe concentrations of chemical vapors. Air inside the enclosure passes through filters before being safely exhausted back into the laboratory. Two filter types may be stacked for mixed chemical…

  • Hooded Combination Kjeldahl units enclose the distillation and digestion apparatus so that process heat may be contained and vented from the laboratory. The hood surrounding the apparatus includes three collars: one for remotely-located exhaust blower connection, one for acid fume exhaust manifold…

  • Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory Hoods. The front edge has a large radius to aerodynamically direct airflow into the fume

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Fume Adsorbers

    Labconco

    …xylene and toluene. Solvent vapors are trapped in the capillary-like channels of the carbon filter while clean air is recirculated into the laboratory. The Fume Adsorber requires no ducting to the outside and is completely portable. It includes one replaceable six pound (2.7 kg) type AC activated…

  • Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory Hoods. The front edge has a large radius to aerodynamically direct airflow into the fume

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Healthier, cleaner air in your laboratory Halo Smart is a ceiling mounted laboratory grade air filtration system working to purify the air from fugitive emissions present in the lab, while also providing real-time communication with the lab manager and users, of the air pollution levels and…

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

Attention Thomas Scientific Customers

Due to the current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.