Stainless Steel Fume Hood

Compare Tool

Select up to 3 products

Stainless Steel Fume Hood
1 - 32 of 50
Sort
View
Show


  • Screen mounts behind the baffles for trapping tissue wipers & other papers. Each kit includes mounting hardware, powder-coated stainless steel screen & instructions. Contact Labconco for screens for hoods wider than 8'.

  • Base cabinets built to last! UniLine Fume Hood Base Cabinets are constructed of top grade furniture steel and finished in a chemical resistant powder coated finish meeting or exceeding SEFA 8 recommended practice for laboratory casework. UniLine Base Cabinets set the standard for safety and…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • …or Stainless Steel Laboratory Hood. Includes electrical receptacle, wiring, junction box and receptacle cover plate. International GFCI Switch for 3', 4', 5', 6', 7' or 8' Protector Premier, Xstream, XL, PVC Perchloric Acid or Stainless Steel Laboratory Hood. Mountable…

  • …and 48” Rear Finish Panel Kits Glacier white powder-coated steel panel hides hood's interior components on the rear to provide finished appearance. Recommended when hood is mounted on a casework island w/ back exposed. Adds 1.5" to overall depth of Floor-Mount hoods.

  • Type 304 stainless steel work surfaces have a 1" deep front spill trough and fit dimensions of Xpert Systems and Stations.

  • Protector Stainless Steel Radioisotope Laboratory Hood. Provides protection from applications requiring the use of radiochemicals. Seamless type 304 stainless steel liner with integral work surface.

  • Protector Stainless Steel Perchloric Acid Laboratory Hood. Designed specifically for procedures involving the use of perchloric acid. One-piece Type 316 stainless steel liner is free of joints to prevent build-up and simplify decontamination. By-pass airflow design. Built-in washdown system with…

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Rugged stainless steel deck and lift mechanism for long life in corrosive environments Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing agents…

  • …control Stainless steel construction Seven sizes for any application Autoclavable and chemical-resistant Heavy-duty stainless steel lab-lifts are very stable lifting platforms that offer exceptionally high strength and durability. Constructed of stainless steel, these lab-lifts…

  • For anchoring of 1/2" lattice frame.

  • The Protector XStream I-S Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream I-S easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than 0.05 ppm leak rate…

  • …a red pilot light, stainless steel cover plate and 1 thermal unit. Fixture is shipped loosed for installation at the job site by mechanical trades. Bench Fume Hood Work Surfaces are 1 1/4" thick modified black epoxy resin work surfaces are required for all bench hoods and are dished to…

  • Thomas No. 1177P04: 1/2" X 4" Rod Thomas No. 1177P05 : 1/2" X 12" Rod Thomas No. 1177P06 : 1/2" X 24" Rod Thomas No. 1177P07 : 1/2" X 36" Rod Thomas No. 1177P08 : 1/2" X 48" Rod Thomas No. 1177P09: 1/2" X…

  • The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than…

  • …into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless Steel Shelf Allows evidence to be supported in the clear chamber during development. 7" w x 5" d (18 x 13 cm). Type 304 stainless steel. One Shelf is…

  • …the deepest fume hoods. Clamps are constructed with round extension arms, which allow the clamps to be rotated 360°. Extension arms also allow placement of apparatus at various distances from lab-frames without compromising the integrity of your experiment. Stainless steel clamps are…

  • …or into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless Steel Shelf Allows evidence to be supported in the clear chamber during development. 7" w x 5" d (18 x 13 cm). Type 304 stainless steel. One Shelf is included…

  • …lighting, slanted sash, large openng for easy access, and side panel utility ports, and low energy consumption. Optional accessories Stainless steel or resin work surface, rolling cart with locking wheels, stationary work bench. All modes require HEPA filters in order to operate (sold…

  • …Benchtop Laboratory Hoods are suitable for general chemistry applications. Features By-pass airflow design Curved air foil allows air to sweep the work surface while Clean-Sweep™ openings pull inflow air from under the air foil Glacier white powder-coated steel exterior …

  • Hooded Combination Units in 6-place, 12-place and 18-place models. Hooded models feature epoxy-coated steel construction reinforced with tubular steel and tempered safety glass, horizontal-sliding sashes. Three collars are provided for connection to remotely-located acid fume and hood heat…

  • Lab Cleaner 32Oz Bottle

    Innovating Science

    This cleaner has been specially formulated for use on laboratory surfaces including, stainless steel, stone/composite bench tops and fume hood sashes. This cleaner is intended for removal of stains and residues. It is not intended as a disinfectant. 32 oz Spray Bottle DOT Info: UN1760, Corrosive…

  • This cleaner has been specially formulated for use on laboratory surfaces including, stainless steel, stone/composite bench tops and fume hood sashes. This cleaner is intended for removal of stains and residues. It is not intended as a disinfectant. 4 oz Spray Bottle DOT Info: UN1760, Corrosive…

  • Filters for Labconco protector work stations Impregnated charcoal filter packs remove dangerous vapors from the work area 5165N47 1 3/8” filters slip behind stainless steel grill to remove formaldehyde vapors quickly and completely

  • Wash Rings

    Labconco

    Wash Ring, wide angle conical spray nozzle, and wash water connection nipple are fabricated into a PVC coupling. For Stainless Steel or PVC Perchloric Acid Hoods. 10" Diameter Flow rate is one gallon per minute at 40 psi. 12" Diameter Flow rate is 0.70 gallons per minute at 20 psi.

  • …soils, grease and dirt Safe to use, non-flammable, biodegradable and VOC compliant For use on engines, machinery, tools, workbenches, garage floors/walls, asphalt, stainless steel, chrome, condenser coils, and exhaust hoods No fumes or unpleasant odors Ready-to-use, no mixing required

  • “Lazy Susan” holds miscellaneous items and rotates 360° to bring items within easy reach Stainless steel surface and ball bearings 12 in. (30 cm) diameter Autoclavable Shipping weight 5 lbs. (2 kg)

  • Includes four stainless steel seismic brackets and hardware for attachment to the stand Hardware to attach to the floor and installation are required Shipping weight 10 lbs. (4.5 kg)

  • Air-Tight Damper

    Labconco

    Mounts atop the Canopy Connection to adjust exhaust airflow and closes for decontamination procedures Manually adjustable, type 304 stainless steel 10"(25.4 cm) high with 10"(25.4 cm) diameter OD inlet and outlet Shipping weight 13 lbs. (6 kg)

  • Stainless steel Mounts to rear grille and provides 8.0" x 5.0" (20 x 13 cm) surface to place supplies Weight capacity: 2.2 lbs. (1 kg), shipping weight 3 lbs. (1 kg)

Attention Thomas Scientific Customers

Due to the current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.