Our range of stainless steel beakers are made from high grade 316L Stainless Steel. Available in 4 convenient sizes in a polished finish. Ideal for use in the laboratory or production environment. These multi-purpose stainless steel beakers are ideal for the collection and storage of powders and…

Ideal for use with a range of liquids. Dippers are quick and easy to use. They are ideal for obtaining a surface sample from a wide range of environments. Sampling Systems™ offer 3 sizes of Stainless dipper. Key Features Manufactured in 316L Stainless Steel Available with 600mm or…

3M™ Sponge-Sticks are available in wet or dry formats, with and without gloves, to fit many applications. The 1.5" x 3" 3M Sponge-Stick allows sampling without directly handling the sponge. Stick-mounted sponge design allows the ability to access hard to reach areas without…

Allows collection from different angles, including 90° Samples liquids, powder or small solids 6' pole extends to 12’, 8' pole extends to 24' Includes 960 mL , wide mouth, high-density polyethylene bottle End of sampler swings, allowing collection of sample from a horizontal flowing…

Low-e Microscope Slides (Box 25)

Originated by Sampling Systems™ over 20 years ago and is a firmly established world leader in powder sampling. The Powder Thief is extensively used throughout the pharmaceutical, chemical and food industries around the world. The PowderThief is suitable for sampling free flowing powders…

316L Stainless Steel Satin finish Tri ferrule fitting at spout base (BS4825-3)

For easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1-1/8”) in diameter and welded to a rigid sampling bowl at a…

For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm…

Accessories for Biosart 100 Monitors

For collecting liquid samples from storage tanks, ponds, wells, etc. Permits collection at various depths Constructed of corrosion-resistant stainless steel, Type 302 Plunger can be activated by bumping unit on tank bottom or at any depth means of a second cord. A weighted…

148-Position Polypropylene Tray for PerkinElmer AS-800 Graphite Furnace Autosampler, 132 sample locations for 1.1mL sample cups and 8 locations for 2.5 or 3.5mL sample cups. Also has 8 positions for 7mL reagent containers.

Manufactured from chemically-resistant polypropylene Specifically designed for easy effective sampling of 55 gallon drums or vessels with openings as small as 2 inch id The 100 mL bottle easily passes through the opening for quick filling The 4-inch T-design handle prevents dropping of sampler…

Graduated Plastic Dipper 2 Pour spouts PVC hand grip on 1" diameter HDPE rod 500mL & 1000mL beaker welded to the rigid handle at a 45º angle High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight…

Small Scoop (1/2 gallon). Fabricated, heavy duty polyethylene scoop with many industrial applications. Large, approximately 1 gallon capacity. Bowl size is 5 3/4" x 8" with 5 1/2" handle.

The Stainless Steel Stirring Paddles from Sampling Systems are ideal for hygienic applications. 316L Stainless Steel Crevice free construction Satin finish Available with holes for improved stirring Part No. Overall Length Blade Width Blade Length Blade…

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

This range of heavy duty Stainless Toggle Drums from Sampling Systems are ideal for storage and production. As standard they come with a fully welded handle, silicone seal (FDA Grade) and lid. The lid is secured with pull down latches (toggle clamps). Manufactured from high grade 316L Stainless…

Norwell® Mucksucker Samplers allow safe, accurate sample collection from 55-gallon drums, truck and rail tank cars, large tanks, process vessels and bodies of water to support sampling applications within laboratory, pharmaceutical, environmental, chemical, food and beverage, semiconductor and…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

Sterilized single pack swab. Swab is for use with the 3M™ Allergen Protein Test Kits. Individually wrapped sterile polyester swabs to collect environmental samples in the food and beverage industry for use with 3M Allergen Protein Test Kits.

Biocide free cellulose sponges in a variety of pre-hydrated dilutions for sample collection. Pre-moistened for convenience, durable, biocide-free cellulose maintains organism viability. Benefits Improved consistency Increased accuracy of results Reduced labour Increased efficiency

Screw the two sections together and lower the unit to the specific depth required (the sampler is marked in 1 ft. (.3 m) increments.) Pull and hold the stainless steel wire at the top, figure A, which opens the valve, figure B, allowing the liquid to flow in. Release the wire allowing the…

Two models: The valve is opened with the thumb to empty the sample. The valve is opened by attaching the sample container to empty the sample. Sampler for thin to viscous liquids. Easy use with one-handed operation. With discharge funnel for safe filling of the sample bottles. …

For determining settleable matter in sewage Clear, impact-resistant plastic Capacity of 1 L Calibrated from 0 to 1000 mL With removable plug at tip; includes wood stand and plastic stirring rod

This configuration of the FAST Flame 2 accessory is a combination of the 2DX-FAS high-speed autosampler, two precision peristaltic pumps and a switching valve, providing quick sample turnaround with fast rinse-out, short signal stabilization times and no sample-to-sample memory effect. The FAST…

Made of anodized aluminum Special “T” handle Used for chemical or physical analysis Multi-sectored sampler for sampling powders, pellets, friable materials which may become non-homogeneous in bags at various levels. Applications: cereals, grainaries, seeds, rice; sites of use:…

These vials are ideal for applications that require the highest sensitivity. Made of ultra-pure, ultra-chemically resistant material, these vials are an excellent choice for high purity, semiconductor and micro-samples. Benefits: Non-contaminating Graduated Temperature range of -200 °C to 260…

Used to take samples from large vessels such as 55 gallon drums. Measures 40" long x 1" O.D. with tooled tip at bottom and bulb handle at top for secure grip; open at both ends. Supplied six per case.

En Core® Sampler is a SINGLE USE device. It cannot be cleaned and/or reused. En Core® Sampler is designed to store soil. Do not use En Core Sampler to store solvent or free product En Core® Sampler must be used with En Core® T-Handle and/or En Core® Extrusion Tool exclusively. (These items…

Jumbo sampler with a tube diameter of 50 mm, ideal for coarse grains and larger quantities. With an open inner tube and large sampling volume, for all-layer samples through all layers of the sample or with sample chambers separated by PTFE separators for multi point sampling from several…

Sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. The scaled sample container can be used for an exact measurement and it shows contents up to 50 ml or 1.5 oz.…