Compare Tool

Select up to 3 products

1 - 21 of 21
  • Stainless Dipper

    Sampling Systems

    Ideal for use with a range of liquids. Dippers are quick and easy to use. They are ideal for obtaining a surface sample from a wide range of environments. Sampling Systems™ offer 3 sizes of Stainless dipper. Key Features Manufactured in 316L Stainless Steel Available with 600mm or…

  • Dipper with Removable Handle

    Corning® Gosselin™

    Polypropylene blue containers Removable handle Shock resistant Packaged individually in tamper evident single Zip bags Traceability information on each bag Sterile 10 -3

  • Dipper PTFE PFA 64mm

    Saint Gobain

  • Multi Dipper 2

    Sampling Systems

    The ideal solution for taking liquid samples from different levels. The sample collection bottle remains closed until the operator uses the control chain to remove the stoppers. Contact Parts Sampler Frame = 316ss Control Chain = 316ss Plugs = 316ss Plug Shackles = 316ss Sample…

  • For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm…

  • HDPE Dippers


    Graduated Plastic Dipper 2 Pour spouts PVC hand grip on 1" diameter HDPE rod 500mL & 1000mL beaker welded to the rigid handle at a 45º angle High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight…

  • For convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …

  • For easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1-1/8”) in diameter and welded to a rigid sampling bowl at a…

  • Available in blue or white to allow for effective sample contrast, these sterile ladles are useful for sampling liquids and creams. Upright handle allows for sampling from above container Curved handle end provides secure withdrawal of sample Fits into 2” openings such as a 45-gallon…

  • Cryo-Dipper

    Diversified Biotech

    Features: Quickly load tubes for freezing Easily retrieve tubes Holds externally threaded cryogenic vials, 0.5mL & 1.5/2.0mL tubes Movable weights prevent floating Durable PVC construction Ideal Use: Organizing and freezing samples in the Benchtop…

  • Dippers. Totally inert and non-contaminating. Extendible screw-in shafts have a steel core for rigidity and are fully encapsulated in Polytetrafluoroethylene. The basic unit consists of a beaker with a single 24" (600mm) shaft.   Replacement Handle Polytetrafluoroethylene Dipper

  • Product Dimensions (l x w x h) : 26.25x5x4.25in Graduated 2 Pour Spouts PVC Hand Grip 500 ml capacity dippers, 18" handle length. High density polyethylene dipper for removing samples from large tanks. Lightweight but extremely durable.

  • Safely sample and dispense corrosive liquids with these high-density polyethylene plastic ladles. Rigid bowl has a handle securely welded at an ergonomically efficient angle

  • High-density polyethylene bowl with securely welded solid handle Handy for sampling and dispensing corrosive liquids Available in a variety of sizes

  • Accessories For Cryogenic Dewars

    Worthington Industries

    …either the 18.8-, or 15.6-in. diameter units. Measuring Rods and Dippers (5150A19, A20) Low-conducting measurement rods will clearly show the LN2 level of a dewer in inches and centimeters. LN2 dippers are safe and convenient. Phase Separator (5150A81, A82) …

  • …components make using this product line quick, fun and easy! FDA Compliant HDPE Purchase individual components or as an entire kit Dipper Sampling Kit (Consists of 1 each below) 1.5' Handle 3' Handle 6' Handle 250 mL Dipping Beaker 500 mL Dipping…

  • …and therefore can be used for sampling barrels, canisters and other containers. The closed handle design ensures secure handling and prevents the dipper slipping out of your hand. DispoDipper is completely manufactured in one piece and can be used for sampling and subsequent transport of the sample…

  • LD Series Cryogenic Dewars

    Worthington Industries

    …design for easy pouring (LD4). Features include a ribbed, high-strength aluminum body with a magniformed necktube design, a snap-on cap and necktube for tight closure and easy access. Optional equipment includes liquid withdrawal device, tipping stand, dippers and roller base (for some models).

  • …convenient, economical way to store and dispense liquid nitrogen. Many lab units can be fitted with pouring spouts, pressurized dispensing devices or dippers to aid in the transfer of liquid nitrogen. Features: Designed for efficient storage of liquid nitrogen Low liquid nitrogen…

  • …SLSolution™) system combines the COPAN invented Sputum Dipper™ with a ready to use mucolytic agent in a vacuum sealed plastic tube. Easily transfer sputum specimens using the unique drill-shaped tool (the Sputum Dipper™) and liquefy the sample for easy processing. …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.