Tank Sampler

Compare Tool

Select up to 3 products

Tank Sampler
1 - 28 of 28
Sort
View
Show
  • TeleScoop Sampling System

    Bürkle

    …bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod. For industry and…

  • Dipping Vessel

    Bürkle

    Dipping vessel for taking all-layer samples from tanks, tank wagons, water courses, water purification plants. Dipping containers are used in various areas to collect liquids for sampling. Bürkle produces the most comprehensive collection of dipping containers by a long way, the right product…

  • Norwell® Mucksucker Samplers

    Saint Gobain

    Norwell® Mucksucker Samplers allow safe, accurate sample collection from 55-gallon drums, truck and rail tank cars, large tanks, process vessels and bodies of water to support sampling applications within laboratory, pharmaceutical, environmental, chemical, food and beverage, semiconductor and…

  • Bomb Sampler, SS, Type 302, 500 mL

    DWK Life Sciences (Wheaton)

    For collecting liquid samples from storage tanks, ponds, wells, etc. Permits collection at various depths Constructed of corrosion-resistant stainless steel, Type 302 Plunger can be activated by bumping unit on tank bottom or at any depth means of a second cord. A weighted plunger…

  • Tank Sampler

    Nasco

    …the sampler in the middle at about a 15° angle and pull the wire, holding the end over an appropriate container (Whirl-Pak® bag), or press and hold the pin on the bottom against a hard surface such as the bottom of a pail. This will release the valve and the sample will flow out. The sampler

  • The Sludge Judge® II

    Nasco

    …requirements of the job. Add or subtract sections as needed, and the 1-ft. (.31 m) markers on the tubing will help identify the amount of sludge in the tank. The unit is made up of three 5-ft. (1.53 m) sections (top, extension, bottom) or individual sections can be combined as required. The Sludge…

  • Polyethylene Dipper

    Dynalon

    High Density Polyethylene dipper for removing samples from large tanks Lightweight but durable Available in three popular sizes: 3, 6 and 12 foot (both 12 foot sizes supplied with 2-piece handle for economy in shipping and storage Supplied with a 500 mL or a 1,000 mL beaker,…

  • ProfiSampler

    Bürkle

    …specially developed for rough industrial use. Applications Sampling liquids in barrels, tanks, lorries, railway goods wagons, ships, water courses, ground water, etc. Vacuum samplers have the advantage that the sample liquid only comes into contact with the suction hose and the…

  • PVC Coliwasa

    DWK Life Sciences (Wheaton)

    Extendable for sampling tank trucks or drums Top spin bar and bottom valve plate mechanism provide positive seal for sample retention along with greater control for releasing sample. Modular design has extra flexibility by permitting connection of several sections to form larger sampling unit…

  • Scienceware® Long-Handled Dippers

    Bel-Art Products

    For easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1-1/8”) in diameter and welded to a rigid sampling bowl at a…

  • Scienceware® Scrapers

    Scienceware®

    …weight, 9.5mm (3/8") thick, chisel edge flat blade is 127mm (5") wide x 152mm (6") long. Rugged scrapers eliminate residue from tanks and large vessels. Ideal for use as mixing paddle or for spreading pastes. Select high-density polyethylene blade (red) for aggressive use. Select…

  • Dipper, High-Density Polyethylene 1.5 Ft.

    Dynalon

    Product Dimensions (l x w x h) : 26.25x5x4.25in Graduated 2 Pour Spouts PVC Hand Grip 500 ml capacity dippers, 18" handle length. High density polyethylene dipper for removing samples from large tanks. Lightweight but extremely durable.

  • LiquiSampler

    Bürkle

    …15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter. Easy cleaning -…

  • Uno Samplers

    Bürkle

    …or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable…

  • MiniSampler

    Bürkle

    With the vacuum sampler MiniSampler, the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be…

  • Scienceware® Liquid Sampler

    Bel-Art Products

    Ideal for viscous liquids, this 50ml (1.65oz) liquid sampler is made for immersion into a can, bottle, tank, vat, etc. Nickel-plated brass cup and tubular handle with finger grips are 45cm (17-1/2") long Center rod with finger ring actuates a valve in the bottom of the cup for…

  • The Sludge Judge®

    Nasco

    …m) sections of 3/4" (1.90 cm) plastic pipe with screw-type connectors. The top section includes a nylon rope for raising and lowering the sampler. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165°F (74°C). Sludge Judge®…

  • Manually-Operated Reel

    Bürkle

    The manually-operated drum reels are used to lower dipping bottles and immersion cylinders safely to the required depth in shafts, wells and tanks and then to pull them up again. The manually-operated drum reels can be equipped with various cables or chains. If flammable or highly flammable liquids…

  • Jumbo Samplers

    Bürkle

    …or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable…

  • Scienceware® Economy Dippers

    Bel-Art Products

    For convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …

  • Scienceware® Safety Acid/Caustic Samplers

    Bel-Art Products

    Excellent for sampling from tank cars, tank trucks and barges, these samplers are well suited for sodium hydroxide, potassium hydroxide, hydrochloric acid, acetic acid, formaldehyde, sulfuric acid, etc. Constructed of a 500cc (16oz) polyethylene bottle screwed onto a 10cm (4") long,…

  • Adjustable Handle Water Sample Dipper

    Bel-Art Products

    For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm…

  • Polyethylene Dippers

    Nasco

    High-density polyethylene dipper for removing samples from large tanks. Lightweight and durable. 12-ft. (3.66 m) handle (two pieces) has a wood core. Has two pour spouts and graduations, PVC grip handle. Dipper is not autoclavable.

  • E-Z Sampler Complete

    DWK Life Sciences (Wheaton)

    Ideal for sampling unknowns from open-top drums and tanks Manufactured from chemically resistant polypropylene The E-Z Sampler® has a 39” (100cm) head/shaft assembly and is supplied with a 125mL borosilicate glass bottle with a PTFE lined cap Filling ports are located above the bottle to…

  • Seals PTFE For Coliwasas

    DWK Life Sciences (Wheaton)

    Glass Coliwasa Samplers are used to collect composite liquid samples from top to bottom in drums, tanks and reservoirs. After a sample has been collected, lower and press lightly on the inner tube, which positively seats the Teflon® seal, locking the sample column into place.

  • Multi Samplers

    Bürkle

    …or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable…

  • All-Layer Samplers

    Bürkle

    …or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable…

  • ChemoSampler

    Bürkle

    …these bottles with original safety ring ensures unadulterated sample transport. Samples can be taken from depths of as much as 200 cm, e.g. from tanks, silos or tankers, by using the extension rod. PP, grey Resistant to acids and alkalis Incl. sample bottle 1000 ml Extension rod 100…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.