SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

Ideal for use with a range of liquids. Dippers are quick and easy to use. They are ideal for obtaining a surface sample from a wide range of environments. Sampling Systems™ offer 3 sizes of Stainless dipper. Key Features Manufactured in 316L Stainless Steel Available with 600mm or…

Zone sampler Spiralus guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the…

3M™ Sponge-Sticks are available in wet or dry formats, with and without gloves, to fit many applications. The 1.5" x 3" 3M Sponge-Stick allows sampling without directly handling the sponge. Stick-mounted sponge design allows the ability to access hard to reach areas without…

Our range of stainless steel beakers are made from high grade 316L Stainless Steel. Available in 4 convenient sizes in a polished finish. Ideal for use in the laboratory or production environment. These multi-purpose stainless steel beakers are ideal for the collection and storage of powders and…

Graduated Plastic Dipper 2 Pour spouts PVC hand grip on 1" diameter HDPE rod 500mL & 1000mL beaker welded to the rigid handle at a 45º angle High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight…

With the vacuum sampler MiniSampler, the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be…

Sampler for ground water samples from wells, pits and other sources. Fits all normal well shafts with control openings to Ø 2", without tilting or getting stuck. Ultra pure materials guarantee the highest degree of sample purity. Easy to clean thanks to rounded edges and threads. …

This range of heavy duty Stainless Toggle Drums from Sampling Systems are ideal for storage and production. As standard they come with a fully welded handle, silicone seal (FDA Grade) and lid. The lid is secured with pull down latches (toggle clamps). Manufactured from high grade 316L Stainless…

The Ellipso-Spoon® Sampler has a specially curved shape that permits contact with all corners of bottles and containers preventing material loss. Crystals, powders, granulated and solid substances and thick liquids are easily retrieved. Autoclavable. Offset, deep spoon end retrieves…

Ideal for multi-zone clean rooms, these one-piece Double-Bagged Sterileware® Sampling Scoops are the perfect shape and size for taking samples, especially from wide-mouth containers. Ten individually packaged scoops are sealed in an outer bag to create multiples layers of protection…

Meat sampler for taking bacteriological samples from the surfaces of dead animals in slaughterhouses and in butchers‘ shops (cattle, pigs, sheep, goats and horses). The BeefSteaker is used to cut out a 25 mm round sample from the animal‘s skin. The stainless steel AISI 420 cutter allows…

PEEK/PTFE rotor for 8 port high-flow valve (1.0mm bore)

Puritan’s new dry transport system securely holds a swab in a round bottom tube made from virgin polypropylene resin, creating a safe and sterile environment to accommodate many different styles of collection devices. The injection molded cap assures a precision fit for multiple handle styles…

All-layer sampler, with open inner tube, no separate chambers, and large sampling volume. For all-layer samples through all the layers of the sample. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be…

Ideal for taking cross sectional samples of powders and some pastes. Manufactured from high quality 316L stainless steel. Key Features: Manufactured in 316L Stainless Steel Available in different sizes and handle combinations. Can be used in the laboratory or on site. Available from…

2 mL Sample Loop, SS

Multi sampler with several closed chambers, for multi point sampling from several predetermined sampling depths. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be collected from all layers of the…

The SteriWare LiquiThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. If you want to buy a disposable liquid sampler then the LiquiThief is the sampler of choice. The…

Gilson Spinning Riffler, w/ Collection Unit & Hopper Custom touch screen controls rotation speed and vibration level Spin riffling is the method of choice for sampling accuracy and reliability of the highest order with dry materials. Gilson’s expertise in sampling and analyses of powders…

Extension Cable for SPB TempSET

The Soil Sampler Pro is ideal for a wide range of soil sampling environments. It is built from high quality 316L Stainless Steel and comes with a wide robust handle which makes sampling easier. Key Features: Can be used on lawns, meadows & light to medium soils Cross sectional sample …

Molded plastic cup. Weight based on sodium chloride. Used in many Hach test kits and procedures.

Unique spatula both scoops material and instantly displays weight. Balance with digital display is located in the easy-grip handle. The weighing range is 0 to 300.0 grams and 0 to 10.580 ounces. Readability is 0.1 gram and 0.005 ounce. Level position repeatability is 0.1 gram and accuracy is…

For dipping bottles and immersion cylinders, matching manually-operated drum reels made of various materials. Tensile load max. up to 10 kg.

The Weighing PharmaScoop from Sampling Systems is a free standing scoop, ideal for use with weighing scales. 316L Stainless Steel Rounded corners Crevice free construction  Satin finish Robust handle

Mini-Pots from Sampling Systems are high quality containers made from 316L Stainless Steel. They have a crevice free interior and are widely used in the pharmaceutical & chemical laboratories worldwide. Available in a range of sizes Satin finish Multi purpose small volume containers …

Open-Ended Drum Thief Soda lime glass units easily broken for quick disposal. All are 43 inches long; capacities from a full 55 gallon drum. Approximate capacity and diameter given in listings.

Reaction vessel made of PTFE-TFM (tetrafluoroethylene, modified). Optionally used as liner in pressure vessels MF100 and HF100 for longer life with high temperature applications.

The new SteriWare Blue Liquid Funnels from Sampling Systems are ideal for transferring liquids in hygienic applications. The highly visible blue colour of the funnel allows it to be easily identified if left in the product. Key Features: Moulded & packed in a Medical Cleanroom …

Metal Large Rack, 21 position, 30mm o.d.

The Sleeve Sampler is ideal for sampling large volumes at great depths. Various sized chambers can be quickly attached to the same handle to allow different sample volumes to be taken. Made from high quality 316L stainless steel. Wide range of sample sizes (0.25ml to 50ml) Wide range of…