Cuvettes For Spectrophotometer

Compare Tool

Select up to 3 products

Cuvettes For Spectrophotometer
1 - 32 of 167
Sort
View
Show


Persee Analytics

  • Spectrophotometer Cuvettes

    Globe Scientific

    cuvettes are designed for use in spectrophotometers. They are produced from either optical polystyrene or UV grade PMMA and include optical windows for optimum transmittance through spectrum range from 340 to 800nm for the optical polystyrene and from 280-800nm for the UV Grade PMMA. These cuvettes

  • Globe Scientific's 20-place Cuvette segments are designed for use on the Hitachi® 911 and 912 analyzers.

  • LED Light Source for stable results and no maintenance No warm up time Saves last 99 results for download to PC or Printer Accepts 10mm cuvettes, or 16mm tubes (Ehlenmeyer side-arm flasks) Adapters available for 10mm and 12mm tubes Easy to clean …

  • …accessories for specialized sample handling is available for the GENESYS 10S spectrophotometers. Choose cell holders for vials or long path cells, add a sipper kit to eliminate handling of cuvettes, or thermostat your sample with circulating water or an air-cooled Peltier accessory for specialized…

  • Cuvettes

    NEST Scientific USA

    …of the spectrophotometers; DNase/RNase free, non-pyrogenic Standard Cuvette Polystyrene material Single use to avoid cross-contamination Spectral range : 340-900nm UV Cuvette Optical UV-transparent materials Good chemical compatibility Suitable for most organic…

  • Globe Scientific's polystyrene (PS) Cuvettes are designed for use on the MLA Electra® 620, 650 and 750 analyzers.

  • Cuvette for Hitachi® 902

    Globe Scientific

    Globe Scientific's 8-place Cuvette segments are designed for use on the Hitachi® 902 analyzer.

  • Cobas Mira® Cuvettes

    Globe Scientific

    Globe Scientific's 12-place Cuvette segments are designed for use on the Cobas Mira®, Mira S® and Mira Plus® analyzers. They are sold individually wrapped or in racks of 15 cuvette segments.

  • …models for routine analyses where conservation of sample is not an issue. NEW ultra-micro size has a 70 µL sample volume for molecular biology applications. Consult your spectrophotometer's operating manual to select the correct Z-dimension cuvette.  These cuvettes can be used…

  • The 12-place cuvette holder is made from polyethylene (PE) and holds 12 cuvettes in place for preparation work, storage and protection from tipping over. When in storage, the racks are stackable. Dimensions: 170mm x 50mm x 15mm. The caps are produced from low density polyethylene (LDPE) and…

  • Vis Cuvettes

    Eppendorf

    Semi-micro cuvettes Vis 300 nm-900 nm, plastic cuvette for measurements in the visible range, max. Filling capacity 3.0 mL, 10 × 100.

  • Hold Fragile Spectrophotometer Cuvettes in Complete Safety These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage. Only the corners of the cuvettes touch the racks Accommodate 12 cuvettes of 10mm light path Will not scratch…

  • for general analysis and experiments and features a large screen graphic LCD that gives you clear, quick, and accurate readings in absorbance and transmittance. The sample compartment is designed to accept both round optical glass, or square 10mm path length cuvettes. This classic spectrophotometer

  • Cuvette for Dade® Analyzers

    Globe Scientific

    Globe Scientific supplies a complete line of cuvettes, sample cups and printer paper for use on the Dade Dimension® analyzers.

  •   Caps for Ultra-Micro cuvettes Cuvette rack  

  • Flow-Through Cells

    Agilent Technologies

    …process and did not offer the best geometry for clean flushing and reduction of contamination. Now Agilent has developed new oval aperture cells that combine low volume with excellent flow characteristics. These oval flow cells are strongly recommended for automated analyses such as dissolution…

  • Cuvette for ATAC® 6000

    Globe Scientific

    Globe Scientific's Cuvettes are individually wrapped and designed for use on the ATAC® 6000 analyzer.

  • …as 20% of that for standard cells of the same path length. Required volume of the Semi-Micro cells (8491S04, T21, T22, S51 and S52) of 0.9 mL can be reduced by elevating the cell so long as the light beam does not strike the walls of the cell. If beam width of spectrophotometer approaches 4 mm,…

  • Globe Scientific's polystyrene (PS) dual well Cuvettes are designed for use on the Coag-A-Mate® XM analyzer.

  • Globe Scientific's 20-place cuvette rotors are designed for use with the IL ACL® models: 100, 200, 300, 1000, 2000, 3000, 6000 & 7000. Please note: Not for use on the ACL 9000 & 10000.

  • Globe Scientific's 20-place Cuvette segments are designed for use on the Hitachi® 717 and 914 analyzers.

  • …plastic cuvettes are an excellent choice for most spectrophotometry applications in the visible range. Manufactured from polystyrene (PS), they provide accurate, reliable results, even at wavelengths as low as 300nm. BRAND plastic cuvettes are compatible with most spectrophotometers and photometers.…

  • cuvettes, like all BRAND cuvettes, are made of the highest quality raw materials, precision molded for the best optical clarity, with parallel walls of uniform thickness to optimize transmission and minimize refraction. They are then mold cavity sorted ensuring cuvette to cuvette consistency for

  • …tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5 x 45 mm outside dimensions. All cuvettes are packaged in dust-free and scratch-resistant trays with covers of expanded, CFC-free, polystyrene for easy storage and protection from scratches or other damage.

  • Cuvettes for Spectrophotometry

    Jenway (Cole-Parmer)

    …extensive range of cuvettes for measuring liquid samples. The cuvette required will depend on the wavelength range required and the sample volume available. Glass cuvettes are only suitable for the visible region, whereas quartz may be used in both the UV and visible region. A 10mm cuvette typically…

  • WP-120 Spectrophotometer

    Walter Products

    for data transfer and can be integrated with a windows-based computer for further data processing and analyses. Optional software packages are available. The spectrophotometer comes standard with a four cell (four position) 10nm, square cuvette changer, set of two optical glass square cuvettes,

  • Caps for Ultra-Micro cuvettes Cuvette rack

  • WP-110RS Spectrophotometer

    Walter Products

    …WP-110RS offers a USB port to interface with windows-based computers. Optional software packages are also available for further processing and analyses of data collected. The spectrophotometer comes with twelve round optical glass cuvettes, a square cuvette adapter, dust cover, and user manual.

  • Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side. Standard 10 mm light path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The polystyrene cuvettes are…

  • …tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5 x 45 mm outside dimensions. All cuvettes are packaged in dust-free and scratch resistant trays with covers of expanded, CFC-free, polystyrene for easy storage and protection from scratches or other damage.

  • …Methacrylate Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side Standard 10 mm Light Path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The methacrylate cuvettes are…

  • Globe Scientific's 8-place Cuvette segments are designed for use on the Hitachi® 704 and 705 analyzers.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.