Racks, White
-
Bottle Carrier - Bucket Type, Rubber
Eagle ThermoplasticsResists most aqueous solutions, acids and bases Steam sterilizable Can be used from -45° C to 110° C Centering ring holds bottle from wall Large carrier accommodates 2.5 L and 4 L bottles. Small carrier accommodates 500 mL and 1,000 mL bottles. Made from a unique, high performance,…
-
Safe and convenient method of carrying bottles Carrying handle 1” in diameter 1784M50 is non-compartmentalized; overall dimensions: 14” x 6 7/8” x 6”. 1784M52 has six compartments measuring 4 1/2” x 3 3/8” x 6” each. 1784M54 has two compartments…
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneSmooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…
-
Adapt-A-Rack®
Heathrow ScientificEach slot adapts to accommodate 12 - 30 mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat…
-
Unwire Half-Racks For 30 mm Test Tubes
Thermo Scientific NalgeneMolded of glass-reinforced polyketone No vinyl or epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and…
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Bottle Holders
TrippNT1781Q25 TrippNT's Single ABS Bottle Holder 500mL keeps your bottles upright and secures. It stabilizes top heavy bottles and stores one 500mL bottle. This product line has keyholes for mounting with provided hardware. 1781Q27 TrippNT's Double ABS Bottle Holder 500mL…
-
Round Floating Microtube Racks
Thermo Scientific NalgeneFor incubating in baths or vessels at elevated or reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36…
-
Test Tube Rack Unwire™ Wht 13 mm
Thermo Scientific NalgeneFull-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…
-
Fiberglass-Reinforced Peg Racks
Heathrow ScientificStrong, tough, versatile, and attractive Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Spacious peg design allows easy viewing of tube contents. User can also turn tubes upside-down and use as a drying rack! Fiberglass…
-
Regular Upright Freezer Racks with 2" White Freezer Boxes
Crystal TechnologiesUpright Freezer Racks Pre-Loaded With 2" White Freezer Boxes w/81 Place Dividers.
-
Scienceware® No-Wire™ Round Racks
SP Bel-ArtThese No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special…
-
Regular Upright Freezer Drawer Racks with 2" White Freezer Boxes
Crystal TechnologiesUpright Drawer Freezer Racks Pre-Loaded With 2" White Freezer Boxes w/ Dividers.
-
Snap Racks™
J.G. FinneranSnap Racks™ are constructed of durable glass reinforced polypropylene, with a center well to conveniently hold caps, seals, septa, etc. Racks snap together securely to double your rack capacity.
-
Polycarbonate Test Tube Racks
United Scientific SuppliesPolycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Microcentrifuge Tube Racks
United Scientific SuppliesStackable polycarbonate racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide temperature range (-135 °C to 135 °C). Autoclavable.
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Combi-Box™ Storage Box
SimportMade of PVC The Simport® Combi-Box™ can be used not only as a storage rack but also as a workstation. The white base will accept all 96- and 384-well plates and an easy to remove transparent cover allows easy viewing of contents. Being only 40 mm high, the stackable…
-
Scienceware® Microcentrifuge Tube Ice Racks
SP Bel-ArtLower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…
-
Test Tube Rack Unwire™ Wht 16 mm
Thermo Scientific NalgeneFull-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…
-
Test Tube Peg Racks
Globe ScientificFully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…
-
Unwire™ Half-Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneConstructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…
-
Rack Microtube Square PP 1.5 ml
Thermo Scientific NalgeneThermo Scientific™ Nalgene Polypropylene Floating Microtube Racks are especially used in genetic cloning, microbiology and immunology labs. Offers excellent temperature resistance from -70° to +100°C (-94° to +212°F). Thaw, cool and incubate samples at elevated or reduced…
-
Scienceware® Thermometer Rack
SP Bel-ArtPolypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)
-
OneRack® Half-Size Delrin® POM Test Tube Racks
Heathrow ScientificExtra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…
-
Storage Racks
Thermo Scientific Sun SRiOpen top racks manufactured from polypropylene Open top available for 8, 12 and 15mm diameter vials Colored vial box racks with lid made from high density polypropylene