Racks

Compare Tool

Select up to 3 products

1 - 32 of 971
Sort
View
Show
  • Polarsafe™ Cooling Blocks

    Argos Technologies

    Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree…

  • Link multiple racks together for a custom rack solution Autoclavable polypropylene (PP) Heavy-duty construction is durable and chemical resistant Multiple colors available for benchtop organization at a glance Numeric markings for sample identification Versatile design accommodates…

  • CoolRack® and CoolSink™ modules

    Brooks Life Sciences

    BioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…

  • Drying Rack, Stainless Steel, Glassware Mod-Rack pegboards serve a dual purpose in a modern laboratory. First, they allow you to quickly dry important, and often fragile, equipment in a sanitary manner. Second, our well-crafted pegboards are a safe place to store often used materials so they…

  • Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

  • Stainless Steel Freezer Drawer Rack for Upright Freezers for use with 2" or 3" Boxes

  • Resists most aqueous solutions, acids and bases Steam sterilizable Can be used from -45° C to 110° C Centering ring holds bottle from wall Large carrier accommodates 2.5 L and 4 L bottles. Small carrier accommodates 500 mL and 1,000 mL bottles. Made from a unique, high performance,…

  • Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…

  • Four angled compartments protect and organize glass or plastic serological pipets Durable ABS construction for scratch resistance and easy cleaning Strong magnets on both sides for secure mounting to most metal surfaces Rack can stand on flat surface without mounting Two included…

  • Box Rack Storage Tanks

    Horizon Scientific

    ABS CryoMax System Vial Capacity: 750 (2ml) Total Box Capacity: 30 Rack Capacity: 6 Boxes per rack: 5 Vials per box: 25 Liquid Nitrogen Capacity: 47.4 liters Static Evaporation Rate: .39 liters/day Static Holding Time: 76 days Neck Diameter (mm): 127 Exterior Height…

  • Grip Rack

    Globe Scientific

    Grip rack for up to 17mm tubes Specially designed test tube rack features rubber grips that hold test tubes in place when decanting liquid. For up to 17mm tubes, 50-place (5 x 10 configuration), blue, Autoclavable. Dimensions: 254 x 140 x 51mm Grip rack w/ tube ejector …

  • Lightest, most durable icewares on the market, Magic Touch™ Rectangular Floating Tube Racks float in water baths, melted ice, dry ice alcohol slurries or liquid nitrogen.. Available to fit 1.5ml microcentrifuge tubes or 15ml conical tubes, they come in blue, black, red and green.  …

  • Vial Racks for 2mL and 4mL Vials

    National Scientific

    Polystyrene racks can be stacked empty or with any number of vials inserted Polypropylene racks can be stacked empty or with a full tray of vials Polypropylene rack is durable; can be washed and reused multiple times All racks feature alphanumeric indexing for easy location of samples …

  • Epoxy Pegboard Drying Racks

    Inter Dyne Systems

    Drying Rack, Pegboard, Epoxy, Glassware Epoxy pegboards come standard in black, 1" thick material. A stainless steel drip trough (sold seperately) can be easily mounted to the bottom edge to provide excellent draining capacity. Please note: Units do not include a wall attachment and…

  • Argos PolarSafe™ Metal Freezer Storage Racks are constructed of high-quality, corrosion resistant stainless steel. Handles at both ends accommodate freezers with right or left handed doors. Our extensive product range will accommodate all type of sample containers including 2", 3",…

  • Test Tube Peg Racks

    Globe Scientific

    Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…

  • 96-Well Reversible Rack

    Heathrow Scientific

    Easy-to-grasp tabs for sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are…

  • MST Processing Rack

    Evergreen Scientific

    Rack holds up to fifty MST tubes. Holes are alpha-numerically labeled. Autoclavable and stackable. Constructed of polypropylene.

  • Drying and Draining Rack

    Globe Scientific

    Stain-Resistant Durable Rack 72 interchangeable pegs - 11 small pegs Drip channel with draining hose Mounting kit and template for hanging Hooks for joining together additional racks Rack dimensions: 17.7"(W) x 24.8"(H) x 4.3"(D) (450mm x 630mm x 110mm) Peg…

  • Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

  • Labcon 24-Place and 48-Place micro centrifuge tube and cryo-vial storage system. For 1.5mL and 2.0mL tubes. These racks fit into Labcon pipet tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can in…

  • Labcon 96-Place Racks and Storage Boxes. These are for use with 0.5mL, 1.7mL and 2.0mL micro centrifuge tubes and 2.0mL cryo- vials. These double-sided racks hold 1.7mL and 2.0mL tubes on one side and 0.5mL on the reverse side. Rack and clear lid are fully autoclavable (122°C) and…

  • Poxygrid® Labware Drain Stand

    Bel-Art - SP Scienceware

    Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…

  • Poxygrid® "Half-Size" Test Tube Racks

    Bel-Art - SP Scienceware

    Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …

  • BioReaction

    Chemglass

    SHAKER RACK FOR 50ML BIOREACTION TUBES, Stainless Steel Construction Angle Adjustment of up to 30° Silicone Gasket Holds Tube Securely Can be used with Skirted or Standard Tubes Fits All Shakers with a top plate of at least 14” x 14” Our unique 49 position shaker…

  • Autoclavable polypropylene (PP) Heavy-duty construction is durable and chemical resistant Multiple colors available for benchtop organization at a glance Versatile design accommodates different tube sizes on each side The four sides hold the following tubes: Eight – 50mL or 30mm…

  • Poxygrid® 50mL Centrifuge Tube Racks

    Bel-Art - SP Scienceware

    50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…

  • Test Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.

  • High Density Polyethylene Safety Tray

    Thermo Scientific Nalgene

    Nalge 7131 White, shatter-resistant polyethylene carrier with removable foam inserts for accommodating 100 mL, 250 mL and 500 mL bottles; remove inserts to accommodate bottles and unwire test tube racks With molded-in handle For safely handling up to six 1 Liter glass or plastic…

  • Designed to support a variety of tube sizes and styles Can be rotated to four different positions Rugged polypropylene construction Autoclavable Racks may be placed in freezer or water bath. Regardless of support position used, footprint is small enough to be conveniently…

  • Dimensions: 263 x 109.5 x 45mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…

  • Rotating Wash Bottle Holder (H0382): Stay mobile with the Rotating Wash Bottle Holder; The sturdy handle provides comfort and control; Holds bottles up to 3” in diameter; Polycarbonate construction Rotating Two-Tier Lab Depot (H0381): Holds up to four wash bottles; Rotates 360° degrees;…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.